7E, RESERVED.
, ID
PowerBook Duo 250
scsiUnused07 (-7929)
PowerBook 100
84, RESERVED.
Because possible Partition Map corruption was detected, this function is quitting. (Re: Special Menu's Check Partition Quality)
scsiDataTypeInvalid (-7865)
SIM does not support the requested scsiDataType.
The drive does not support SCSI Extended Seek commands or there was an error seeking.
60, RESERVED.
Because 'Insert_Mirror_Data' failed. This step of examining mirroring is aborting.
52, RESERVED.
04, HARDWARE ERROR
45, RESELECT FAILED.
37, RESERVED.
29, POWER UP OR RESET.
Proceed with testing of device
Out of Memory!
Try closing some windows.
Although it is not safe to continue, Do you want to view or edit partitions anyway?
Complete setup failed!
Volume
Reset of alternate SCSI bus failed!
Items: (5 entries)
0:
Bounds: x1=280, y1=80, x2=348, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=210, y1=80, x2=268, y2=100
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=354, y2=42
Type: -120
Info: '^0'
3:
Bounds: x1=14, y1=49, x2=352, y2=65
Type: 16
Info: ''
4:
Bounds: x1=137, y1=76, x2=169, y2=108
Type: -128
Info: '' failed on drive #
DisposPtr
Formatting failed!
Fast Block Compare Progress
0F, RESERVED
Custom partitioning done.
Items: (4 entries)
0:
Bounds: x1=304, y1=62, x2=408, y2=86
Type: 4
Info: 'OK'
1:
Bounds: x1=42, y1=8, x2=410, y2=56
Type: -120
Info: '^0'
2:
Bounds: x1=1, y1=8, x2=33, y2=40
Type: -96
Info: ''
3:
Bounds: x1=58, y1=59, x2=118, y2=79
Type: -128
Info: ''Items: (17 entries)
0:
Bounds: x1=350, y1=264, x2=415, y2=284
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=4, x2=424, y2=54
Type: -120
Info: 'Transoft SCSI Director™ has encountered a problem. Please see the following message for a description of the problem and a possible solution.'
2:
Bounds: x1=0, y1=66, x2=64, y2=82
Type: -120
Info: 'Manager:'
3:
Bounds: x1=25, y1=82, x2=65, y2=98
Type: -120
Info: 'Code:'
4:
Bounds: x1=72, y1=66, x2=400, y2=82
Type: -120
Info: ''
5:
Bounds: x1=72, y1=82, x2=400, y2=98
Type: -120
Info: ''
6:
Bounds: x1=0, y1=124, x2=415, y2=176
Type: -120
Info: ''
7:
Bounds: x1=0, y1=204, x2=415, y2=250
Type: -120
Info: ''
8:
Bounds: x1=0, y1=104, x2=141, y2=118
Type: -120
Info: ''
9:
Bounds: x1=0, y1=184, x2=154, y2=198
Type: -120
Info: ''
10:
Bounds: x1=0, y1=0, x2=59, y2=55
Type: -64
Info: '7'
11:
Bounds: x1=0, y1=97, x2=426, y2=105
Type: -64
Info: 'L'
12:
Bounds: x1=0, y1=117, x2=426, y2=125
Type: -64
Info: 'L'
13:
Bounds: x1=0, y1=177, x2=426, y2=185
Type: -64
Info: 'L'
14:
Bounds: x1=0, y1=198, x2=426, y2=206
Type: -64
Info: 'L'
15:
Bounds: x1=0, y1=58, x2=426, y2=66
Type: -64
Info: 'L'
16:
Bounds: x1=0, y1=249, x2=426, y2=257
Type: -64
Info: 'L'Testing device
Formatting device
Waiting for confirmation.
Unmounting device
Partitioning was canceled.
0E, MISCOMPARE
Items: (4 entries)
0:
Bounds: x1=303, y1=95, x2=407, y2=119
Type: 4
Info: 'OK'
1:
Bounds: x1=42, y1=8, x2=409, y2=91
Type: -120
Info: '^0'
2:
Bounds: x1=1, y1=8, x2=33, y2=40
Type: -96
Info: ''
3:
Bounds: x1=16, y1=99, x2=76, y2=119
Type: -128
Info: ''Fast Block Copier Progress
WARNING! Are you sure you want to do this? Partitioning will erase all files on the device with SCSI ID #
NewPtr
, with OS Error =
Items: (42 entries)
0:
Bounds: x1=22, y1=21, x2=285, y2=203
Type: -128
Info: ''
1:
Bounds: x1=22, y1=40, x2=285, y2=59
Type: 0
Info: ''
2:
Bounds: x1=22, y1=58, x2=285, y2=77
Type: 0
Info: ''
3:
Bounds: x1=22, y1=76, x2=285, y2=95
Type: -128
Info: ''
4:
Bounds: x1=22, y1=94, x2=285, y2=113
Type: -128
Info: ''
5:
Bounds: x1=22, y1=112, x2=285, y2=131
Type: -128
Info: ''
6:
Bounds: x1=22, y1=130, x2=285, y2=149
Type: -128
Info: ''
7:
Bounds: x1=22, y1=148, x2=285, y2=167
Type: -128
Info: ''
8:
Bounds: x1=22, y1=166, x2=285, y2=185
Type: -128
Info: ''
9:
Bounds: x1=22, y1=184, x2=285, y2=203
Type: -128
Info: ''
10:
Bounds: x1=5, y1=42, x2=21, y2=58
Type: -128
Info: ''
11:
Bounds: x1=5, y1=60, x2=21, y2=76
Type: -128
Info: ''
12:
Bounds: x1=5, y1=78, x2=21, y2=94
Type: -128
Info: ''
13:
Bounds: x1=5, y1=96, x2=21, y2=112
Type: -128
Info: ''
14:
Bounds: x1=5, y1=114, x2=21, y2=130
Type: -128
Info: ''
15:
Bounds: x1=5, y1=132, x2=21, y2=148
Type: -128
Info: ''
16:
Bounds: x1=5, y1=150, x2=21, y2=166
Type: -128
Info: ''
17:
Bounds: x1=5, y1=168, x2=21, y2=184
Type: -128
Info: ''
18:
Bounds: x1=5, y1=186, x2=21, y2=202
Type: -128
Info: ''
19:
Bounds: x1=22, y1=21, x2=285, y2=43
Type: -128
Info: ''
20:
Bounds: x1=22, y1=4, x2=38, y2=20
Type: -128
Info: ''
21:
Bounds: x1=44, y1=5, x2=285, y2=21
Type: -128
Info: ''
22:
Bounds: x1=22, y1=210, x2=232, y2=255
Type: -128
Info: ''
23:
Bounds: x1=414, y1=267, x2=814, y2=294
Type: -64
Info: ' Ä'
24:
Bounds: x1=422, y1=58, x2=474, y2=71
Type: -120
Info: 'Auto Setup'
25:
Bounds: x1=430, y1=121, x2=466, y2=134
Type: -120
Info: 'Format'
26:
Bounds: x1=422, y1=184, x2=471, y2=197
Type: -120
Info: 'Partition'
27:
Bounds: x1=432, y1=247, x2=464, y2=260
Type: -120
Info: 'Install'
28:
Bounds: x1=487, y1=58, x2=515, y2=71
Type: -120
Info: 'Mount'
29:
Bounds: x1=481, y1=121, x2=521, y2=134
Type: -120
Info: 'Unmount'
30:
Bounds: x1=239, y1=257, x2=285, y2=270
Type: -120
Info: 'ID Search'
31:
Bounds: x1=485, y1=245, x2=512, y2=258
Type: -120
Info: 'Test'
32:
Bounds: x1=503, y1=357, x2=543, y2=368
Type: -120
Info: 'Configure'
33:
Bounds: x1=425, y1=12, x2=469, y2=56
Type: 0
Info: ''
34:
Bounds: x1=425, y1=75, x2=469, y2=119
Type: 0
Info: ''
35:
Bounds: x1=425, y1=138, x2=469, y2=182
Type: 0
Info: ''
36:
Bounds: x1=425, y1=201, x2=469, y2=245
Type: 0
Info: ''
37:
Bounds: x1=478, y1=12, x2=522, y2=56
Type: 0
Info: ''
38:
Bounds: x1=478, y1=75, x2=522, y2=119
Type: 0
Info: ''
39:
Bounds: x1=241, y1=211, x2=285, y2=255
Type: 0
Info: ''
40:
Bounds: x1=478, y1=199, x2=522, y2=243
Type: 0
Info: ''
41:
Bounds: x1=501, y1=311, x2=545, y2=355
Type: 0
Info: ''SCSI Receive Diagnostic
of ID:
DDM
Although problems were found, Do you want to view or edit partitions anyway?
Program is quitting to the Finder because of memory problems.
LAST CHANCE. ARE YOU SURE YOU WISH TO PROCEED WITH TESTING OF DEVICE
28, MEDIUM CHANGED.
36, RESERVED.
44, SCSI HARDWARE/FIRMWARE ERROR.
05, ILLEGAL REQUEST
(Low Memory?)
53, RESERVED.
61, RESERVED.
The drive does not support SCSI Extended Seek commands. This is not an error condition.
scsiIDInvalid (-7866)
The initiator ID is invalid.
Because Source Partition is password protected, this function is quitting. (Re: Setup Menu's "Volumes...")
Macintosh Classic II
85, RESERVED.
7F, RESERVED.
scsiUnused06 (-7930)
Macintosh LC II
CURRENT/CHANGEABLE display
83, RESERVED.
PowerBook 170
The MODE SENSE command failed. Try updating the values.
Quadra 800
scsiUnused08 (-7928)
7D, RESERVED.
Partition Copy failed!
77, RESERVED.
scsiTIDInvalid (-7868)
The target ID is invalid.
Name the result file:
51, RESERVED.
Partition Map on selected device could not be read (I/O error)! Repair may be needed.
5F, RESERVED.
07, DATA REQUEST
2A, MODE SELECT CHANGED CONDITION.
38, RESERVED.
Error occurred from a Resource Manager call.
The partition analyzer failed due to extreme partitioning problems!, Do you want to try again showing specifics?
Device Copy was successful!
Clearing blocks...
Problem accounted for.
Block
HLock
Formatting was successful!
From/To
Partitioning device
Completely setting up device
, ID
Items: (17 entries)
0:
Bounds: x1=232, y1=152, x2=292, y2=172
Type: 4
Info: 'OK'
1:
Bounds: x1=160, y1=152, x2=220, y2=172
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=0, y1=32, x2=296, y2=48
Type: -64
Info: 'L'
4:
Bounds: x1=40, y1=8, x2=256, y2=24
Type: -120
Info: 'Select Device Test(s) to execute.'
5:
Bounds: x1=0, y1=48, x2=80, y2=64
Type: -120
Info: 'SPEED TESTS'
6:
Bounds: x1=0, y1=128, x2=296, y2=144
Type: -64
Info: 'L'
7:
Bounds: x1=144, y1=48, x2=264, y2=64
Type: -120
Info: 'RELIABILITY TESTS'
8:
Bounds: x1=8, y1=64, x2=64, y2=80
Type: 5
Info: 'Seek'
9:
Bounds: x1=8, y1=80, x2=120, y2=96
Type: 5
Info: 'SCSI Manager'
10:
Bounds: x1=8, y1=96, x2=104, y2=112
Type: 5
Info: 'SCSI Driver'
11:
Bounds: x1=8, y1=112, x2=80, y2=128
Type: 5
Info: 'Mac OS'
12:
Bounds: x1=144, y1=64, x2=248, y2=80
Type: 5
Info: 'P&G-Listing'
13:
Bounds: x1=144, y1=80, x2=240, y2=96
Type: 5
Info: 'SCSI Verify'
14:
Bounds: x1=144, y1=96, x2=264, y2=112
Type: 5
Info: 'Media Analysis'
15:
Bounds: x1=144, y1=112, x2=288, y2=128
Type: 5
Info: 'Hardware Exercise'
16:
Bounds: x1=54, y1=147, x2=114, y2=167
Type: -128
Info: ''Items: (10 entries)
0:
Bounds: x1=184, y1=208, x2=244, y2=228
Type: 4
Info: 'OK'
1:
Bounds: x1=112, y1=208, x2=172, y2=228
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: 32
Info: ''
3:
Bounds: x1=40, y1=56, x2=232, y2=72
Type: -120
Info: 'What would you like to do?'
4:
Bounds: x1=16, y1=96, x2=36, y2=112
Type: 6
Info: ''
5:
Bounds: x1=16, y1=160, x2=36, y2=176
Type: 6
Info: ''
6:
Bounds: x1=40, y1=80, x2=248, y2=136
Type: 0
Info: ''
7:
Bounds: x1=40, y1=144, x2=248, y2=200
Type: 0
Info: ''
8:
Bounds: x1=40, y1=208, x2=100, y2=228
Type: -128
Info: ''
9:
Bounds: x1=40, y1=0, x2=248, y2=48
Type: -128
Info: ''Installing driver to device
ID
WARNING! Are you sure you want to do this? Formatting will erase all files on the device with SCSI ID #
HUnLock
PM
Test_Partition_Integrity routine failed to execute.
Enter number of blocks to clear [1-
Enter block number to read
Despite chance of creating extreme partitioning problems, Do you want to continue editing the partitions anyway?
Items Read:
Almost out of memory!
Try closing some windows.
39, RESERVED.
2B, RESERVED.
06, UNIT ATTENTION
5E, RESERVED.
50, RESERVED.
Note: Because Partition Map on a device is unreadable, this step of examining mirroring is skipping that particular SCSI ID.
SCSI Results
scsiLUNInvalid (-7867)
The logical unit number is invalid.
76, RESERVED.
Because Destination Partition is password protected, this function is quitting. (Re: Setup Menu's "Volumes...")
scsiUnableToTerminate (-7927)
Unable to terminate I/O parameter block request.
Quadra 650
7C, RESERVED.
82, RESERVED.
Quadra 700
Quadra 900
Partition Copy failed!
6C, RESERVED.
Quadra 950
86, RESERVED.
78, RESERVED.
PowerBook Duo 230
scsiUnused05 (-7931)
Items: (16 entries)
0:
Bounds: x1=424, y1=16, x2=484, y2=36
Type: 4
Info: 'OK'
1:
Bounds: x1=352, y1=16, x2=412, y2=36
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ''
3:
Bounds: x1=48, y1=16, x2=342, y2=33
Type: -120
Info: 'Modify Partition Map Entry Dialog (Limited)'
4:
Bounds: x1=108, y1=60, x2=380, y2=77
Type: -120
Info: 'First Block of Partition : 'pmPyPartStart''
5:
Bounds: x1=108, y1=84, x2=375, y2=100
Type: -120
Info: 'Total Blocks in Partition : 'pmParBlkCnt''
6:
Bounds: x1=8, y1=156, x2=160, y2=172
Type: -120
Info: 'pmPartName (32 char)'
7:
Bounds: x1=107, y1=108, x2=432, y2=123
Type: -120
Info: 'Block Offset into Partition : 'pmLgDataStart''
8:
Bounds: x1=107, y1=132, x2=449, y2=148
Type: -120
Info: 'Total blocks used within this Partition : 'pmDataCnt''
9:
Bounds: x1=0, y1=41, x2=500, y2=54
Type: -64
Info: 'L'
10:
Bounds: x1=10, y1=60, x2=99, y2=76
Type: 16
Info: ''
11:
Bounds: x1=10, y1=84, x2=99, y2=100
Type: 16
Info: ''
12:
Bounds: x1=10, y1=108, x2=99, y2=124
Type: 16
Info: ''
13:
Bounds: x1=10, y1=132, x2=99, y2=147
Type: 16
Info: ''
14:
Bounds: x1=168, y1=156, x2=488, y2=172
Type: 16
Info: ''
15:
Bounds: x1=424, y1=8, x2=488, y2=32
Type: -128
Info: ''Improper data structure contents detected.
54, RESERVED.
5A, RESERVED.
scsiFuntionNotAvailable (-7871)
The requested function is not supported by this SIM.
The drive does not support the SCSI Verify command. This is not an error condition.
Latest Information
2F, RESERVED.
35, RESERVED.
Items: (5 entries)
0:
Bounds: x1=274, y1=101, x2=334, y2=121
Type: 4
Info: 'Yes'
1:
Bounds: x1=202, y1=101, x2=262, y2=121
Type: 4
Info: 'No'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=40, y1=2, x2=340, y2=96
Type: -120
Info: ''
4:
Bounds: x1=12, y1=68, x2=72, y2=88
Type: -128
Info: ''02, NOT READY
Double click on destination device for copy or double click No Device to cancel.
Enter disk interleave to be used during the Format command (0 = 1) [0-3].
Test_Partition_Integrity routine failed to execute, though problem accounted for. Aborting partition editor.
WARNING! Are you sure you want to do this? Auto Setup will erase all files on the device with SCSI ID #
Read_Capacity failed.
Suspend Scanning
Version
Partitioning failed!
DisposHandle
DIVerify
Waiting for confirmation of "Test" command.
Items: (22 entries)
0:
Bounds: x1=248, y1=185, x2=308, y2=205
Type: 4
Info: 'OK'
1:
Bounds: x1=168, y1=185, x2=228, y2=205
Type: 4
Info: 'Cancel'
2:
Bounds: x1=96, y1=185, x2=153, y2=206
Type: -128
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=40, y1=8, x2=272, y2=24
Type: -120
Info: 'Select the partition type to write.'
5:
Bounds: x1=0, y1=32, x2=320, y2=40
Type: -64
Info: 'L'
6:
Bounds: x1=8, y1=40, x2=100, y2=56
Type: 6
Info: 'Mac Driver'
7:
Bounds: x1=8, y1=56, x2=112, y2=72
Type: 6
Info: 'Mac Volume'
8:
Bounds: x1=8, y1=88, x2=72, y2=104
Type: 6
Info: 'Extra'
9:
Bounds: x1=8, y1=104, x2=80, y2=120
Type: 6
Info: 'Scratch'
10:
Bounds: x1=8, y1=120, x2=152, y2=136
Type: 6
Info: 'A/UX Autorecovery'
11:
Bounds: x1=8, y1=136, x2=176, y2=152
Type: 6
Info: 'A/UX Root&Usr slice 0'
12:
Bounds: x1=8, y1=152, x2=144, y2=168
Type: 6
Info: 'A/UX Swap slice 1'
13:
Bounds: x1=177, y1=40, x2=313, y2=56
Type: 6
Info: 'A/UX Root slice 0'
14:
Bounds: x1=177, y1=56, x2=305, y2=72
Type: 6
Info: 'A/UX Usr slice 2'
15:
Bounds: x1=177, y1=72, x2=313, y2=88
Type: 6
Info: 'Free A/UX slice 3'
16:
Bounds: x1=177, y1=88, x2=313, y2=104
Type: 6
Info: 'Free A/UX slice 4'
17:
Bounds: x1=177, y1=104, x2=313, y2=120
Type: 6
Info: 'Free A/UX slice 5'
18:
Bounds: x1=177, y1=120, x2=313, y2=136
Type: 6
Info: 'Free A/UX slice 6'
19:
Bounds: x1=177, y1=136, x2=265, y2=152
Type: 6
Info: 'Misc A/UX'
20:
Bounds: x1=8, y1=72, x2=130, y2=88
Type: 6
Info: 'ProDOS Volume'
21:
Bounds: x1=0, y1=169, x2=320, y2=177
Type: -64
Info: 'L'0D, VOLUME OVERFLOW
Aborting SCSI block copier command because the media can not be ejected.
Aborting SCSI block copier command.
0C, EQUAL
Items: (13 entries)
0:
Bounds: x1=188, y1=241, x2=248, y2=261
Type: 4
Info: 'OK'
1:
Bounds: x1=118, y1=241, x2=178, y2=261
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=241, x2=77, y2=262
Type: -128
Info: ''
3:
Bounds: x1=0, y1=0, x2=252, y2=110
Type: -128
Info: ''
4:
Bounds: x1=0, y1=106, x2=253, y2=118
Type: -64
Info: 'L'
5:
Bounds: x1=0, y1=231, x2=253, y2=239
Type: -64
Info: 'L'
6:
Bounds: x1=10, y1=114, x2=151, y2=131
Type: 5
Info: 'Password protect'
7:
Bounds: x1=10, y1=130, x2=131, y2=147
Type: 5
Info: 'Manual mount'
8:
Bounds: x1=10, y1=146, x2=100, y2=163
Type: 5
Info: 'Read only'
9:
Bounds: x1=10, y1=162, x2=161, y2=179
Type: 5
Info: 'Disable Finder Eject'
10:
Bounds: x1=10, y1=178, x2=164, y2=195
Type: 5
Info: 'Make Boot Partition'
11:
Bounds: x1=10, y1=194, x2=172, y2=208
Type: -120
Info: 'Enter Password below:'
12:
Bounds: x1=10, y1=212, x2=244, y2=229
Type: 16
Info: ''Waiting for confirmation of "Initialize" command.
DIZero
NewHandle
Proceed with driver installation on device
Product
Resume Scanning
Complete setup was successful!
The partitions seem too damaged to allow this function to continue. Do you want specific problem details?
WARNING: Mount AND Initialize any newly created Mac Volumes automatically if found, even though NOT SAFE?
Do you wish to copy the entire device?
03, MEDIUM ERROR
Items: (5 entries)
0:
Bounds: x1=277, y1=103, x2=337, y2=123
Type: 4
Info: 'OK'
1:
Bounds: x1=205, y1=103, x2=265, y2=123
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=40, y1=2, x2=347, y2=97
Type: -120
Info: ''
4:
Bounds: x1=11, y1=101, x2=71, y2=121
Type: -128
Info: ''34, RESERVED.
2E, RESERVED.
The drive failed to perform a SCSI Extended Seek command.
scsiPBLengthError (-7872)
The parameter block length is too small for this SIM.
5B, RESERVED.
Program error.
55, RESERVED.
79, RESERVED.
scsiNonZeroStatus (-7932)
The target returned non-zero status upon completion of the request.
Macintosh
PowerBook 140
87, RESERVED.
Macintosh LC
6D, RESERVED.
Partition Copy was successful.
This copies a partition over another partition. First, you will choose the source to copy from...
PowerBook 180
scsiRequestAborted (-7934)
Parameter block request is in progress.
7B, RESERVED.
89, RESERVED.
Macintosh LC III
Selected (Physical):
5D, RESERVED.
57, RESERVED.
Improper memory structures passed to 'Analyze_Mirror_Master_List' to analyze
Advanced Power User
scsiRequestInvalid (-7870)
The parameter block request is invalid.
The drive does not support the SCSI Verify command or there was an error verifying.
32, NO DEFECT SPARE LOCATION AVAILABLE.
2C, RESERVED.
Improper memory structures detected. Not initialized.
Items: (5 entries)
0:
Bounds: x1=192, y1=70, x2=252, y2=90
Type: 4
Info: 'Yes'
1:
Bounds: x1=120, y1=70, x2=180, y2=90
Type: 4
Info: 'No'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=40, y1=0, x2=256, y2=64
Type: -120
Info: ''
4:
Bounds: x1=12, y1=68, x2=72, y2=88
Type: -128
Info: ''01, RECOVERED ERROR
4E, RESERVED.
]. Continue with Partition View/Edit?
Testing failed!
Double click on source device for copy or double click No Device to cancel.
Select a solution, so mounting and initializing may continue. (Choice '1' is preferred here)
1st Driver type
No Error Set!
Driver installation failed!
DIFormat
GetNewDialog
Items: (57 entries)
0:
Bounds: x1=336, y1=250, x2=396, y2=270
Type: 4
Info: 'OK'
1:
Bounds: x1=264, y1=250, x2=324, y2=270
Type: 4
Info: 'Cancel'
2:
Bounds: x1=216, y1=248, x2=256, y2=264
Type: 0
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=40, y1=8, x2=376, y2=24
Type: -120
Info: 'Select the desktop icon used to display partitions.'
5:
Bounds: x1=0, y1=32, x2=408, y2=40
Type: -64
Info: 'L'
6:
Bounds: x1=0, y1=237, x2=408, y2=245
Type: -64
Info: 'L'
7:
Bounds: x1=8, y1=40, x2=46, y2=78
Type: 0
Info: ''
8:
Bounds: x1=48, y1=40, x2=86, y2=78
Type: 0
Info: ''
9:
Bounds: x1=88, y1=40, x2=126, y2=78
Type: 0
Info: ''
10:
Bounds: x1=128, y1=40, x2=166, y2=78
Type: 0
Info: ''
11:
Bounds: x1=168, y1=40, x2=206, y2=78
Type: 0
Info: ''
12:
Bounds: x1=208, y1=40, x2=246, y2=78
Type: 0
Info: ''
13:
Bounds: x1=248, y1=40, x2=286, y2=78
Type: 0
Info: ''
14:
Bounds: x1=288, y1=40, x2=326, y2=78
Type: 0
Info: ''
15:
Bounds: x1=328, y1=40, x2=366, y2=78
Type: 0
Info: ''
16:
Bounds: x1=368, y1=40, x2=406, y2=78
Type: 0
Info: ''
17:
Bounds: x1=8, y1=80, x2=46, y2=118
Type: 0
Info: ''
18:
Bounds: x1=48, y1=80, x2=86, y2=118
Type: 0
Info: ''
19:
Bounds: x1=88, y1=80, x2=126, y2=118
Type: 0
Info: ''
20:
Bounds: x1=128, y1=80, x2=166, y2=118
Type: 0
Info: ''
21:
Bounds: x1=168, y1=80, x2=206, y2=118
Type: 0
Info: ''
22:
Bounds: x1=208, y1=80, x2=246, y2=118
Type: 0
Info: ''
23:
Bounds: x1=248, y1=80, x2=286, y2=118
Type: 0
Info: ''
24:
Bounds: x1=288, y1=80, x2=326, y2=118
Type: 0
Info: ''
25:
Bounds: x1=328, y1=80, x2=366, y2=118
Type: 0
Info: ''
26:
Bounds: x1=368, y1=80, x2=406, y2=118
Type: 0
Info: ''
27:
Bounds: x1=8, y1=120, x2=46, y2=158
Type: 0
Info: ''
28:
Bounds: x1=48, y1=120, x2=86, y2=158
Type: 0
Info: ''
29:
Bounds: x1=88, y1=120, x2=126, y2=158
Type: 0
Info: ''
30:
Bounds: x1=128, y1=120, x2=166, y2=158
Type: 0
Info: ''
31:
Bounds: x1=168, y1=120, x2=206, y2=158
Type: 0
Info: ''
32:
Bounds: x1=208, y1=120, x2=246, y2=158
Type: 0
Info: ''
33:
Bounds: x1=248, y1=120, x2=286, y2=158
Type: 0
Info: ''
34:
Bounds: x1=288, y1=120, x2=326, y2=158
Type: 0
Info: ''
35:
Bounds: x1=328, y1=120, x2=366, y2=158
Type: 0
Info: ''
36:
Bounds: x1=368, y1=120, x2=406, y2=158
Type: 0
Info: ''
37:
Bounds: x1=8, y1=160, x2=46, y2=198
Type: 0
Info: ''
38:
Bounds: x1=48, y1=160, x2=86, y2=198
Type: 0
Info: ''
39:
Bounds: x1=88, y1=160, x2=126, y2=198
Type: 0
Info: ''
40:
Bounds: x1=128, y1=160, x2=166, y2=198
Type: 0
Info: ''
41:
Bounds: x1=168, y1=160, x2=206, y2=198
Type: 0
Info: ''
42:
Bounds: x1=208, y1=160, x2=246, y2=198
Type: 0
Info: ''
43:
Bounds: x1=248, y1=160, x2=286, y2=198
Type: 0
Info: ''
44:
Bounds: x1=288, y1=160, x2=326, y2=198
Type: 0
Info: ''
45:
Bounds: x1=328, y1=160, x2=366, y2=198
Type: 0
Info: ''
46:
Bounds: x1=368, y1=160, x2=406, y2=198
Type: 0
Info: ''
47:
Bounds: x1=8, y1=200, x2=46, y2=238
Type: 0
Info: ''
48:
Bounds: x1=48, y1=200, x2=86, y2=238
Type: 0
Info: ''
49:
Bounds: x1=88, y1=200, x2=126, y2=238
Type: 0
Info: ''
50:
Bounds: x1=128, y1=200, x2=166, y2=238
Type: 0
Info: ''
51:
Bounds: x1=168, y1=200, x2=206, y2=238
Type: 0
Info: ''
52:
Bounds: x1=208, y1=200, x2=246, y2=238
Type: 0
Info: ''
53:
Bounds: x1=248, y1=200, x2=286, y2=238
Type: 0
Info: ''
54:
Bounds: x1=288, y1=200, x2=326, y2=238
Type: 0
Info: ''
55:
Bounds: x1=328, y1=200, x2=366, y2=238
Type: 0
Info: ''
56:
Bounds: x1=368, y1=200, x2=406, y2=238
Type: 0
Info: ''The drive is uninitialized, or its partition map has become invalid.
ID
0A, COPY ABORT
0B, ABORTED COMMAND
KB/Sec
Could not perform the operation requested.
Items: (18 entries)
0:
Bounds: x1=360, y1=208, x2=420, y2=228
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=210, x2=140, y2=230
Type: -128
Info: ''
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=40, y1=8, x2=432, y2=24
Type: -120
Info: 'The device has the following sense information to report.'
4:
Bounds: x1=0, y1=28, x2=440, y2=44
Type: -64
Info: 'L'
5:
Bounds: x1=88, y1=40, x2=432, y2=72
Type: -128
Info: ''
6:
Bounds: x1=88, y1=76, x2=432, y2=108
Type: -128
Info: ''
7:
Bounds: x1=88, y1=112, x2=432, y2=144
Type: -128
Info: ''
8:
Bounds: x1=88, y1=148, x2=432, y2=196
Type: -128
Info: ''
9:
Bounds: x1=0, y1=40, x2=88, y2=72
Type: -120
Info: 'Device Information'
10:
Bounds: x1=0, y1=76, x2=88, y2=108
Type: -120
Info: 'Sense Key Information'
11:
Bounds: x1=0, y1=112, x2=88, y2=144
Type: -120
Info: 'Sense Code Information'
12:
Bounds: x1=0, y1=156, x2=88, y2=188
Type: -120
Info: 'Additional Information'
13:
Bounds: x1=0, y1=71, x2=88, y2=79
Type: -64
Info: 'L'
14:
Bounds: x1=0, y1=107, x2=88, y2=115
Type: -64
Info: 'L'
15:
Bounds: x1=0, y1=143, x2=88, y2=151
Type: -64
Info: 'L'
16:
Bounds: x1=0, y1=192, x2=440, y2=208
Type: -64
Info: 'L'
17:
Bounds: x1=290, y1=208, x2=348, y2=228
Type: 4
Info: 'More'Untitled
Driver installation was successful!
1st Driver size
This is a program error.
Do you want to mount the device AND initialize any newly created Mac Volumes automatically when found?
Device Copy failed!
Testing was successful!
DANGER: You are overriding an important safety measure. Damage factor is [
4F, RESERVED.
Program error?
00, NO SENSE
Items: (5 entries)
0:
Bounds: x1=192, y1=70, x2=252, y2=90
Type: 4
Info: 'OK'
1:
Bounds: x1=120, y1=70, x2=180, y2=90
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=40, y1=0, x2=256, y2=64
Type: -120
Info: ''
4:
Bounds: x1=12, y1=68, x2=72, y2=88
Type: -128
Info: ''2D, RESERVED.
33, RESERVED.
Utility Menu
The drive failed to perform a SCSI Verify command.
scsiBusInvalid (-7869)
The bus ID is invalid.
56, RESERVED.
Severe, bizarre problem. Mirror participant count for one of your mirrored sets is corrupted! Would you like to to detach mirroring the set now?
5C, RESERVED.
Busy files:
88, RESERVED.
Macintosh
scsiUnableToAbort (-7933)
Parameter block request aborted by the host.
PowerBook 160
7A, RESERVED.
The source and destination are the same and are removable. Will you need to eject the device between steps?
Power Macintosh 8100/100
91, RESERVED.
No Error, successful. (0)
97, RESERVED.
Power Macintosh 5200
Power Macintosh 7500
Quadra 900/PPC Upgrade
PowerBook Duo 280c
Menu ID: 129
ProcID: 0
Enabled flags: 0xFFFFF863
Title: 'File'
Items: (zero-terminated list)
0:
Name: 'Open Test Results...'
Icon number: 0
Key equivalent: 'O' (0x4F)
Mark character: 0x0
Style: 0x00
1:
Name: 'Close'
Icon number: 0
Key equivalent: 'W' (0x57)
Mark character: 0x0
Style: 0x00
2:
Name: 'Save Test Results...'
Icon number: 0
Key equivalent: 'S' (0x53)
Mark character: 0x0
Style: 0x00
3:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Restart'
Icon number: 0
Key equivalent: 'R' (0x52)
Mark character: 0x0
Style: 0x00
5:
Name: 'Shutdown'
Icon number: 0
Key equivalent: 'K' (0x4B)
Mark character: 0x0
Style: 0x00
6:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Page Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: 'Print...'
Icon number: 0
Key equivalent: 'P' (0x50)
Mark character: 0x0
Style: 0x00
9:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: 'Quit Transoft SCSI Director™'
Icon number: 0
Key equivalent: 'Q' (0x51)
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Recursion error detected. This was caused by Perform_Request_Sense failing.
Quadra 630
PowerBook 165
The disk still has
Items: (6 entries)
0:
Bounds: x1=200, y1=72, x2=260, y2=92
Type: 4
Info: 'Yes'
1:
Bounds: x1=40, y1=72, x2=100, y2=92
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=40, y1=0, x2=256, y2=64
Type: -120
Info: ''
4:
Bounds: x1=120, y1=72, x2=180, y2=92
Type: 4
Info: 'No'
5:
Bounds: x1=5, y1=45, x2=65, y2=65
Type: -128
Info: ''24, ILLEGAL FIELD IN CDB.
Driver Descriptor Map, ID:
16, RESERVED.
Macintosh 128K
Preparing Devices
Some volumes could not be unmounted by this program. There may be open files on the Startup, Application, or other volume.
Use Blind Reads if possible?
07, RESERVED.
Type
The device's SCSI driver is now neutralized. Run this program again after restarting to finish installing a working SCSI driver. Restart now?
NOTE: The driver you are now installing will only be used when the device is not connected to an alternative SCSI bus.
A/UX System Drive with Macintosh OS partitions and/or optional free area.
Written by Jim Wolff
scsiNoSuchXref (-7882)
No driver has been cross-referenced with this device.
Note: The selected "SCSI bus" is not the normal Macintosh bus. It is not recommended to analyze or setup using alternate busses. Continue anyway?
Items: (57 entries)
0:
Bounds: x1=430, y1=234, x2=488, y2=254
Type: 4
Info: 'OK'
1:
Bounds: x1=350, y1=234, x2=408, y2=254
Type: 4
Info: 'Cancel'
2:
Bounds: x1=280, y1=234, x2=337, y2=254
Type: -128
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=150, y1=10, x2=349, y2=26
Type: -120
Info: 'DataDock Array Physical Page'
5:
Bounds: x1=0, y1=30, x2=496, y2=43
Type: -64
Info: 'L'
6:
Bounds: x1=0, y1=220, x2=497, y2=233
Type: -64
Info: 'L'
7:
Bounds: x1=60, y1=80, x2=88, y2=95
Type: 16
Info: ''
8:
Bounds: x1=100, y1=80, x2=128, y2=95
Type: 16
Info: ''
9:
Bounds: x1=140, y1=80, x2=168, y2=95
Type: 16
Info: ''
10:
Bounds: x1=180, y1=80, x2=208, y2=95
Type: 16
Info: ''
11:
Bounds: x1=220, y1=80, x2=248, y2=95
Type: 16
Info: ''
12:
Bounds: x1=60, y1=100, x2=88, y2=115
Type: 16
Info: ''
13:
Bounds: x1=100, y1=100, x2=128, y2=115
Type: 16
Info: ''
14:
Bounds: x1=140, y1=100, x2=168, y2=115
Type: 16
Info: ''
15:
Bounds: x1=180, y1=100, x2=208, y2=115
Type: 16
Info: ''
16:
Bounds: x1=220, y1=100, x2=248, y2=115
Type: 16
Info: ''
17:
Bounds: x1=60, y1=120, x2=88, y2=135
Type: 16
Info: ''
18:
Bounds: x1=100, y1=120, x2=128, y2=135
Type: 16
Info: ''
19:
Bounds: x1=140, y1=120, x2=168, y2=135
Type: 16
Info: ''
20:
Bounds: x1=180, y1=120, x2=208, y2=135
Type: 16
Info: ''
21:
Bounds: x1=220, y1=120, x2=248, y2=135
Type: 16
Info: ''
22:
Bounds: x1=60, y1=140, x2=88, y2=155
Type: 16
Info: ''
23:
Bounds: x1=100, y1=140, x2=128, y2=155
Type: 16
Info: ''
24:
Bounds: x1=140, y1=140, x2=168, y2=155
Type: 16
Info: ''
25:
Bounds: x1=180, y1=140, x2=208, y2=155
Type: 16
Info: ''
26:
Bounds: x1=220, y1=140, x2=248, y2=155
Type: 16
Info: ''
27:
Bounds: x1=60, y1=160, x2=88, y2=175
Type: 16
Info: ''
28:
Bounds: x1=100, y1=160, x2=128, y2=175
Type: 16
Info: ''
29:
Bounds: x1=140, y1=160, x2=168, y2=175
Type: 16
Info: ''
30:
Bounds: x1=180, y1=160, x2=208, y2=175
Type: 16
Info: ''
31:
Bounds: x1=220, y1=160, x2=248, y2=175
Type: 16
Info: ''
32:
Bounds: x1=60, y1=180, x2=88, y2=195
Type: 16
Info: ''
33:
Bounds: x1=100, y1=180, x2=128, y2=195
Type: 16
Info: ''
34:
Bounds: x1=140, y1=180, x2=168, y2=195
Type: 16
Info: ''
35:
Bounds: x1=180, y1=180, x2=208, y2=195
Type: 16
Info: ''
36:
Bounds: x1=220, y1=180, x2=248, y2=195
Type: 16
Info: ''
37:
Bounds: x1=60, y1=200, x2=88, y2=215
Type: 16
Info: ''
38:
Bounds: x1=100, y1=200, x2=128, y2=215
Type: 16
Info: ''
39:
Bounds: x1=140, y1=200, x2=168, y2=215
Type: 16
Info: ''
40:
Bounds: x1=180, y1=200, x2=208, y2=215
Type: 16
Info: ''
41:
Bounds: x1=220, y1=200, x2=248, y2=215
Type: 16
Info: ''
42:
Bounds: x1=120, y1=40, x2=178, y2=56
Type: -120
Info: 'Channel'
43:
Bounds: x1=2, y1=79, x2=37, y2=111
Type: -120
Info: 'Rank
ID'
44:
Bounds: x1=70, y1=60, x2=83, y2=76
Type: -120
Info: '1'
45:
Bounds: x1=110, y1=60, x2=123, y2=76
Type: -120
Info: '2'
46:
Bounds: x1=150, y1=60, x2=163, y2=76
Type: -120
Info: '3'
47:
Bounds: x1=190, y1=60, x2=203, y2=76
Type: -120
Info: '4'
48:
Bounds: x1=230, y1=60, x2=243, y2=76
Type: -120
Info: '5'
49:
Bounds: x1=40, y1=100, x2=53, y2=116
Type: -120
Info: '1'
50:
Bounds: x1=40, y1=120, x2=53, y2=136
Type: -120
Info: '2'
51:
Bounds: x1=40, y1=140, x2=53, y2=156
Type: -120
Info: '3'
52:
Bounds: x1=40, y1=160, x2=53, y2=176
Type: -120
Info: '4'
53:
Bounds: x1=40, y1=180, x2=53, y2=196
Type: -120
Info: '5'
54:
Bounds: x1=40, y1=200, x2=53, y2=216
Type: -120
Info: '6'
55:
Bounds: x1=40, y1=80, x2=53, y2=96
Type: -120
Info: '0'
56:
Bounds: x1=270, y1=40, x2=497, y2=175
Type: -120
Info: 'Function codes
--------------
0 - Mark drive operation
1 - Delete drive (non existent)
3 - Fail drive
4 - Replace and reconstruct
(7) Controller exists at channel
20 - Replace, format, reconstruct'Items: (18 entries)
0:
Bounds: x1=360, y1=243, x2=418, y2=263
Type: 4
Info: 'OK'
1:
Bounds: x1=280, y1=243, x2=338, y2=263
Type: 4
Info: 'Cancel'
2:
Bounds: x1=210, y1=243, x2=267, y2=263
Type: -128
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=90, y1=10, x2=325, y2=26
Type: -120
Info: 'NS-SCSI Driver Installation Options'
5:
Bounds: x1=0, y1=30, x2=426, y2=42
Type: -64
Info: 'L'
6:
Bounds: x1=0, y1=229, x2=426, y2=243
Type: -64
Info: 'L'
7:
Bounds: x1=10, y1=74, x2=338, y2=91
Type: 5
Info: 'Use Write and Verify command for Writes'
8:
Bounds: x1=10, y1=93, x2=419, y2=111
Type: 5
Info: 'Determine use of Blind reading and writing automatically'
9:
Bounds: x1=40, y1=113, x2=167, y2=132
Type: 5
Info: 'Use Blind reads'
10:
Bounds: x1=40, y1=133, x2=171, y2=152
Type: 5
Info: 'Use Blind writes'
11:
Bounds: x1=10, y1=153, x2=424, y2=187
Type: 5
Info: 'Use flashing rectangle warning with 'SCSI !' message, when
device is not communicating, or media suddenly missing'
12:
Bounds: x1=10, y1=193, x2=356, y2=209
Type: 5
Info: 'Compress NS-SCSI Driver on disk (recommended)'
13:
Bounds: x1=10, y1=211, x2=269, y2=229
Type: 5
Info: 'Set Mode Select options for drive'
14:
Bounds: x1=10, y1=38, x2=255, y2=55
Type: 5
Info: 'Support removable media devices'
15:
Bounds: x1=10, y1=56, x2=266, y2=73
Type: 5
Info: 'Detect and warn illegal removal'
16:
Bounds: x1=0, y1=149, x2=426, y2=158
Type: -64
Info: 'L'
17:
Bounds: x1=0, y1=186, x2=426, y2=195
Type: -64
Info: 'L'Items: (3 entries)
0:
Bounds: x1=22, y1=106, x2=87, y2=149
Type: 4
Info: 'OK'
1:
Bounds: x1=106, y1=7, x2=306, y2=31
Type: -120
Info: '^0'
2:
Bounds: x1=108, y1=40, x2=305, y2=174
Type: -120
Info: '^1'Mirroring analysis cancelled (at users request)
This is a safety feature to detect if mirrored partitions have any deviations from the main Mirror Master partition. It could take several minutes to perform, but it is useful.
scsiQLinkInvalid (-7881)
The qLink field was not 0.
This supports every SCSI-1 compatible storage device known to exist. This includes SCSI-2 devices.
A/UX Data Drive with optional Macintosh OS partitions and/or free area.
Note: The driver being replaced is not ours. IF it's an EXOTIC and special SCSI driver that compresses or encrypts data, or has passwords, you should 'Cancel' and turn those features off first. (That situation is rare)
Driver installation cancelled, by your request.
06, NO TRACK ZERO.
Update Values
Determine use of Blind reading and writing automatically?
You must reboot the computer to load the newly installed Driver.
Main Window
17, RECOVERED READ ERROR (WITH RETRIES).
Macintosh XL
25, INVALID LUN.
mb.
Macintosh
Macintosh
LC 475/PPC Upgrade
SCSIComplete returned os_Error =
Menu ID: 128
ProcID: 0
Enabled flags: 0xFFFFFFFB
Title: ''
Items: (zero-terminated list)
0:
Name: 'About Transoft SCSI Director™…'
Icon number: 1
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00 Macintosh
AJ
96, RESERVED.
Power Macintosh 6200
Macintosh LC 520
Disk is Full! (-34)
90, RESERVED.
Macintosh IIvi
98, RESERVED.
92, RESERVED.
File is Locked (Busy) (-45)
Macintosh
SCSIComplete reported completion status error code =
PowerBook Duo 280
Quadra 700/PPC Upgrade
Macintosh
Items: (44 entries)
0:
Bounds: x1=126, y1=71, x2=389, y2=253
Type: -128
Info: ''
1:
Bounds: x1=126, y1=90, x2=389, y2=109
Type: 0
Info: ''
2:
Bounds: x1=126, y1=108, x2=389, y2=127
Type: 0
Info: ''
3:
Bounds: x1=126, y1=126, x2=389, y2=145
Type: -128
Info: ''
4:
Bounds: x1=126, y1=144, x2=389, y2=163
Type: -128
Info: ''
5:
Bounds: x1=126, y1=162, x2=389, y2=181
Type: -128
Info: ''
6:
Bounds: x1=126, y1=180, x2=389, y2=199
Type: -128
Info: ''
7:
Bounds: x1=126, y1=198, x2=389, y2=217
Type: -128
Info: ''
8:
Bounds: x1=126, y1=216, x2=389, y2=235
Type: -128
Info: ''
9:
Bounds: x1=126, y1=234, x2=389, y2=253
Type: -128
Info: ''
10:
Bounds: x1=109, y1=92, x2=125, y2=108
Type: -128
Info: ''
11:
Bounds: x1=109, y1=110, x2=125, y2=126
Type: -128
Info: ''
12:
Bounds: x1=109, y1=128, x2=125, y2=144
Type: -128
Info: ''
13:
Bounds: x1=109, y1=146, x2=125, y2=162
Type: -128
Info: ''
14:
Bounds: x1=109, y1=164, x2=125, y2=180
Type: -128
Info: ''
15:
Bounds: x1=109, y1=182, x2=125, y2=198
Type: -128
Info: ''
16:
Bounds: x1=109, y1=200, x2=125, y2=216
Type: -128
Info: ''
17:
Bounds: x1=109, y1=218, x2=125, y2=234
Type: -128
Info: ''
18:
Bounds: x1=109, y1=236, x2=125, y2=252
Type: -128
Info: ''
19:
Bounds: x1=126, y1=71, x2=389, y2=93
Type: -128
Info: ''
20:
Bounds: x1=126, y1=54, x2=142, y2=70
Type: -128
Info: ''
21:
Bounds: x1=148, y1=55, x2=338, y2=71
Type: -128
Info: ''
22:
Bounds: x1=126, y1=8, x2=389, y2=53
Type: -128
Info: ''
23:
Bounds: x1=0, y1=263, x2=400, y2=290
Type: -64
Info: ' Ä'
24:
Bounds: x1=7, y1=54, x2=59, y2=67
Type: -120
Info: 'Auto Setup'
25:
Bounds: x1=15, y1=117, x2=51, y2=130
Type: -120
Info: 'Format'
26:
Bounds: x1=7, y1=180, x2=56, y2=193
Type: -120
Info: 'Partition'
27:
Bounds: x1=17, y1=243, x2=49, y2=256
Type: -120
Info: 'Install'
28:
Bounds: x1=72, y1=54, x2=100, y2=67
Type: -120
Info: 'Mount'
29:
Bounds: x1=66, y1=117, x2=106, y2=130
Type: -120
Info: 'Unmount'
30:
Bounds: x1=61, y1=180, x2=107, y2=193
Type: -120
Info: 'ID Search'
31:
Bounds: x1=70, y1=243, x2=97, y2=256
Type: -120
Info: 'Test'
32:
Bounds: x1=87, y1=353, x2=131, y2=364
Type: -120
Info: 'Configure'
33:
Bounds: x1=10, y1=8, x2=54, y2=52
Type: 0
Info: ''
34:
Bounds: x1=10, y1=71, x2=54, y2=115
Type: 0
Info: ''
35:
Bounds: x1=10, y1=134, x2=54, y2=178
Type: 0
Info: ''
36:
Bounds: x1=10, y1=197, x2=54, y2=241
Type: 0
Info: ''
37:
Bounds: x1=63, y1=8, x2=107, y2=52
Type: 0
Info: ''
38:
Bounds: x1=63, y1=71, x2=107, y2=115
Type: 0
Info: ''
39:
Bounds: x1=63, y1=134, x2=107, y2=178
Type: 0
Info: ''
40:
Bounds: x1=63, y1=197, x2=107, y2=241
Type: 0
Info: ''
41:
Bounds: x1=87, y1=307, x2=131, y2=351
Type: 0
Info: ''
42:
Bounds: x1=343, y1=54, x2=363, y2=69
Type: -128
Info: ''
43:
Bounds: x1=367, y1=54, x2=387, y2=69
Type: -128
Info: '' Macintosh
Enter size of partition #
Macintosh Plus
15, SEEK ERROR.
scsiWrongDirection (-7915)
Data phase was in an unexpected direction.
23, RESERVED.
Failed to verify the SCSI device, even though actual Format command was successful.
Unable to unmount the Destination device, proceed with the copy anyway?
Partition Options
Partitioning cannot be performed on a volume with open files such as the Startup and Application volume.
Do you want to deactivate the "Special" menu?
04, DRIVE NOT READY.
Select a solution, so mounting may continue. (For this step, choice '1' is preferred)
The device is not communicating well (cabling, unformatted, damaged?) Check your system!
v4.0
scsiDeviceConflict (-7883)
Attempt to register more than one driver to a device.
Select the A/UX partitioning method you wish to use with the device.
This is declared as a Mirrored partition, but a Mirror Copy is not currently synchronized! You can either re-copy it, or detach all its Mirror Copies. Detach them?
If you have a Master Mirrored partition with more than one copy of the master, use this command to detach one of the copies. This will free up the space used by them.
Partition map COULD NOT update!
Items: (52 entries)
0:
Bounds: x1=430, y1=293, x2=488, y2=313
Type: 4
Info: 'OK'
1:
Bounds: x1=350, y1=293, x2=408, y2=313
Type: 4
Info: 'Cancel'
2:
Bounds: x1=280, y1=293, x2=337, y2=313
Type: -128
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=90, y1=10, x2=425, y2=26
Type: -120
Info: 'DataDock EEPROM Configure (all values in decimal)'
5:
Bounds: x1=0, y1=30, x2=496, y2=43
Type: -64
Info: 'L'
6:
Bounds: x1=0, y1=279, x2=497, y2=292
Type: -64
Info: 'L'
7:
Bounds: x1=0, y1=45, x2=219, y2=61
Type: -120
Info: 'Enable Synchronous Negotiation'
8:
Bounds: x1=0, y1=65, x2=167, y2=81
Type: -120
Info: 'Enable Wide Negotiation'
9:
Bounds: x1=0, y1=85, x2=124, y2=102
Type: -120
Info: 'Spin-up Algorithm'
10:
Bounds: x1=0, y1=105, x2=97, y2=123
Type: -120
Info: 'Spin-up Delay'
11:
Bounds: x1=0, y1=125, x2=105, y2=141
Type: -120
Info: 'Ready Timeout'
12:
Bounds: x1=0, y1=145, x2=142, y2=162
Type: -120
Info: 'Host Command Delay'
13:
Bounds: x1=0, y1=165, x2=235, y2=181
Type: -120
Info: 'Firmware Drive Command Timeout'
14:
Bounds: x1=0, y1=185, x2=129, y2=201
Type: -120
Info: 'Default RAID Level'
15:
Bounds: x1=0, y1=185, x2=129, y2=201
Type: -120
Info: 'Default RAID Level'
16:
Bounds: x1=0, y1=205, x2=129, y2=221
Type: -120
Info: 'Option Control Bits'
17:
Bounds: x1=0, y1=225, x2=192, y2=241
Type: -120
Info: 'Sense Key for Drive Failures'
18:
Bounds: x1=0, y1=245, x2=137, y2=261
Type: -120
Info: 'Inquiry Data Byte 7'
19:
Bounds: x1=0, y1=265, x2=184, y2=282
Type: -120
Info: 'ROM Sequence Control Bits'
20:
Bounds: x1=261, y1=45, x2=454, y2=61
Type: -120
Info: 'Synchronization Control Bits'
21:
Bounds: x1=251, y1=65, x2=452, y2=81
Type: -120
Info: 'Inquiry Revision Level Format'
22:
Bounds: x1=265, y1=85, x2=452, y2=101
Type: -120
Info: 'Diagnostic Self-Test Options'
23:
Bounds: x1=214, y1=105, x2=452, y2=121
Type: -120
Info: 'Host Command Delay For Bus Reset'
24:
Bounds: x1=227, y1=125, x2=452, y2=141
Type: -120
Info: 'Inquiry Unconfigured Device Type'
25:
Bounds: x1=356, y1=146, x2=452, y2=162
Type: -120
Info: 'Timeout Value'
26:
Bounds: x1=341, y1=166, x2=452, y2=181
Type: -120
Info: 'Timeout Actions'
27:
Bounds: x1=256, y1=185, x2=454, y2=201
Type: -120
Info: 'Drive Bus Reset to Read Wait'
28:
Bounds: x1=266, y1=205, x2=454, y2=221
Type: -120
Info: 'Host Delay After Data Phase'
29:
Bounds: x1=296, y1=225, x2=454, y2=241
Type: -120
Info: 'Disabled Drive Channels'
30:
Bounds: x1=220, y1=45, x2=248, y2=58
Type: 16
Info: ''
31:
Bounds: x1=170, y1=65, x2=198, y2=78
Type: 16
Info: ''
32:
Bounds: x1=130, y1=85, x2=158, y2=98
Type: 16
Info: ''
33:
Bounds: x1=100, y1=105, x2=128, y2=118
Type: 16
Info: ''
34:
Bounds: x1=110, y1=125, x2=143, y2=138
Type: 16
Info: ''
35:
Bounds: x1=147, y1=145, x2=181, y2=158
Type: 16
Info: ''
36:
Bounds: x1=240, y1=165, x2=268, y2=178
Type: 16
Info: ''
37:
Bounds: x1=145, y1=185, x2=179, y2=198
Type: 16
Info: ''
38:
Bounds: x1=145, y1=205, x2=197, y2=218
Type: 16
Info: ''
39:
Bounds: x1=200, y1=225, x2=228, y2=238
Type: 16
Info: ''
40:
Bounds: x1=140, y1=245, x2=168, y2=258
Type: 16
Info: ''
41:
Bounds: x1=190, y1=265, x2=218, y2=278
Type: 16
Info: ''
42:
Bounds: x1=461, y1=45, x2=489, y2=58
Type: 16
Info: ''
43:
Bounds: x1=461, y1=65, x2=489, y2=78
Type: 16
Info: ''
44:
Bounds: x1=461, y1=85, x2=489, y2=98
Type: 16
Info: ''
45:
Bounds: x1=461, y1=105, x2=489, y2=118
Type: 16
Info: ''
46:
Bounds: x1=461, y1=125, x2=489, y2=138
Type: 16
Info: ''
47:
Bounds: x1=461, y1=145, x2=489, y2=158
Type: 16
Info: ''
48:
Bounds: x1=461, y1=165, x2=489, y2=178
Type: 16
Info: ''
49:
Bounds: x1=461, y1=185, x2=489, y2=198
Type: 16
Info: ''
50:
Bounds: x1=461, y1=205, x2=489, y2=218
Type: 16
Info: ''
51:
Bounds: x1=461, y1=225, x2=489, y2=238
Type: 16
Info: ''Items: (16 entries)
0:
Bounds: x1=430, y1=234, x2=488, y2=254
Type: 4
Info: 'OK'
1:
Bounds: x1=350, y1=234, x2=408, y2=254
Type: 4
Info: 'Cancel'
2:
Bounds: x1=280, y1=234, x2=337, y2=254
Type: -128
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=90, y1=10, x2=402, y2=26
Type: -120
Info: 'DataDock EEPROM Configure Option Control Bits'
5:
Bounds: x1=0, y1=30, x2=496, y2=43
Type: -64
Info: 'L'
6:
Bounds: x1=0, y1=220, x2=497, y2=233
Type: -64
Info: 'L'
7:
Bounds: x1=10, y1=44, x2=267, y2=62
Type: 5
Info: 'Set Save Data Pointers Message bit'
8:
Bounds: x1=10, y1=60, x2=200, y2=81
Type: 5
Info: 'Use development options'
9:
Bounds: x1=10, y1=80, x2=270, y2=100
Type: 5
Info: 'Allow logical units greater than 2 GB'
10:
Bounds: x1=10, y1=100, x2=426, y2=118
Type: 5
Info: 'Issue Hardware Reset when Host SCSI bus reset is received'
11:
Bounds: x1=10, y1=120, x2=249, y2=138
Type: 5
Info: 'Allow drive microcode download'
12:
Bounds: x1=10, y1=140, x2=307, y2=158
Type: 5
Info: 'Enable drive SCSI bus time-out capability'
13:
Bounds: x1=10, y1=160, x2=277, y2=178
Type: 5
Info: 'Enable command time-out capability'
14:
Bounds: x1=10, y1=180, x2=468, y2=198
Type: 5
Info: 'Pass through Write Long, Write(6), Write(10), and Write and Verify'
15:
Bounds: x1=10, y1=200, x2=197, y2=218
Type: 5
Info: 'Pass through Format Unit'To shutdown mirroring. If you have a Master Mirrored partition with valid, or invalid, mirror copies, use this command to detach all of the copies. This will free up all the space used by the copies.
This device has been partitioned using the pre-3/87 partitioning mechanism. Therefore, the partition map will appear corrupted.
Mirrored partition is not in sync with copy. Detach them?
A/UX partitioning with optional Macintosh OS partitions.
scsiNoHBA (-7884)
No HBA detected.
Transoft SCSI Director™ ©1989-95 by Transoft Corporation. All rights reserved. 800/949-NINE order 900/370-TECH tech support
805/565-5200 admin
805/565-5208 fax
AppleLink: TRANSOFT
eWord: TRANSOFTCORP
Fatal Error! Program flaw. Unspecified case from 'Select_SCSI_Driver_Override_Technique'!!!
Select a solution, so SCSI driver installation may continue. (For this step, choice '2' is preferred)
Items: (22 entries)
0:
Bounds: x1=364, y1=231, x2=430, y2=251
Type: 4
Info: 'Next'
1:
Bounds: x1=294, y1=231, x2=354, y2=251
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=43, y1=223, x2=75, y2=255
Type: -128
Info: ''
4:
Bounds: x1=0, y1=34, x2=443, y2=45
Type: -64
Info: 'L'
5:
Bounds: x1=1, y1=215, x2=443, y2=227
Type: -64
Info: 'L'
6:
Bounds: x1=37, y1=2, x2=381, y2=33
Type: -120
Info: 'Mirroring Partition Information'
7:
Bounds: x1=5, y1=54, x2=140, y2=71
Type: -128
Info: ''
8:
Bounds: x1=5, y1=73, x2=140, y2=90
Type: -128
Info: ''
9:
Bounds: x1=5, y1=92, x2=139, y2=109
Type: -128
Info: ''
10:
Bounds: x1=255, y1=92, x2=389, y2=109
Type: -128
Info: ''
11:
Bounds: x1=5, y1=111, x2=139, y2=128
Type: -128
Info: ''
12:
Bounds: x1=5, y1=130, x2=139, y2=147
Type: -128
Info: ''
13:
Bounds: x1=6, y1=168, x2=48, y2=185
Type: -128
Info: ''
14:
Bounds: x1=143, y1=54, x2=439, y2=69
Type: -128
Info: ''
15:
Bounds: x1=143, y1=73, x2=440, y2=88
Type: -128
Info: ''
16:
Bounds: x1=143, y1=92, x2=167, y2=107
Type: -128
Info: ''
17:
Bounds: x1=393, y1=92, x2=439, y2=107
Type: -128
Info: ''
18:
Bounds: x1=143, y1=111, x2=439, y2=126
Type: -128
Info: ''
19:
Bounds: x1=143, y1=130, x2=439, y2=145
Type: -128
Info: ''
20:
Bounds: x1=52, y1=168, x2=438, y2=214
Type: -128
Info: ''
21:
Bounds: x1=109, y1=231, x2=212, y2=251
Type: 4
Info: 'Detach This...'You must select a SCSI ID before any operations can be performed.
05, DRIVE NOT SELECTED.
You must reboot the computer before the new Driver will be loaded.
Updating Devices
Proceed with setup window display toggling?
Failed to read and write to the SCSI device reliably! Termination, cabling, defective?
22, RESERVED.
scsiSequenceFail (-7916)
Target bus phase sequence failure.
Macintosh 512K enhanced
14, RECORD NOT FOUND.
scsiCDBReceived (-7910)
The SCSI CDB was received.
, maximum of
Macintosh
Macintosh
PowerBook 150
Good = 0, Check Condition = 2, Busy = 8, Intermediate good = 0x10, Reservation Conflict = 0x18
Power Macintosh 6100/80
Is External File System (-58)
93, RESERVED.
Macintosh
Macintosh
99, RESERVED.
LC 575/PPC Upgrade
Power Macintosh 7100/60
9D, RESERVED.
Power Macintosh 7100/80
Quadra 610
8F, RESERVED.
Disk is Write Protected (-44)
Initializing drive... verifying format.
Macintosh
Macintosh LC 575
Partitioning of device was cancelled.
Logical blk of partition's boot code
18, RECOVERED READ ERROR (WITH ECC).
Macintosh IIx
1E, RESERVED.
12, ID FIELD ADDRESS MARK NOT FOUND.
scsiUnused16 (-7914)
Enter block number to reassign
Usage Conditions
Enter destination starting block number to copy to
Proceed with enabling read ahead cache for the SCSI device?
The attempt to Un-Neutralize the SCSI driver did not succeed.
Sorry! Because forcibly overtaking the old the SCSI driver failed, you must choose again.
01, NO MARK.
Size
This is declared as a Mirrored partition, but some Mirror Copies aren't available. You should detach all its Mirror Copies.
Notice: Unable to unmount volumes because of open files. "Restart" for Mirror changes to take place.
Mounting device...
Transoft SCSI Director‚Ñ¢
scsiTooManyBuses (-7888)
SIM registration failed because the XPT registry is full.
Partition map updated!
This is just a quick way to see if any problems with mirrors exists, and fix them. Some problems are: improperly shutdown partitions, missing Mirror Copies, and orphaned Mirror Copies.
Items: (10 entries)
0:
Bounds: x1=4, y1=45, x2=239, y2=266
Type: 0
Info: ''
1:
Bounds: x1=10, y1=360, x2=105, y2=379
Type: 4
Info: 'Configure…'
2:
Bounds: x1=10, y1=380, x2=132, y2=399
Type: 4
Info: 'Mount Device …'
3:
Bounds: x1=165, y1=279, x2=236, y2=302
Type: 4
Info: 'OK'
4:
Bounds: x1=10, y1=272, x2=78, y2=293
Type: -128
Info: ''
5:
Bounds: x1=96, y1=281, x2=154, y2=301
Type: 4
Info: 'Cancel'
6:
Bounds: x1=40, y1=0, x2=239, y2=36
Type: -120
Info: 'Partition
Selection'
7:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
8:
Bounds: x1=0, y1=32, x2=240, y2=48
Type: -64
Info: 'L'
9:
Bounds: x1=0, y1=264, x2=240, y2=279
Type: -64
Info: 'L'Items: (8 entries)
0:
Bounds: x1=176, y1=128, x2=236, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=104, y1=128, x2=164, y2=148
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=0, y1=32, x2=240, y2=40
Type: -64
Info: 'L'
4:
Bounds: x1=72, y1=8, x2=200, y2=24
Type: -120
Info: 'Value Input Dialog'
5:
Bounds: x1=8, y1=40, x2=232, y2=88
Type: -120
Info: ''
6:
Bounds: x1=72, y1=96, x2=176, y2=112
Type: 16
Info: ''
7:
Bounds: x1=76, y1=131, x2=100, y2=149
Type: -128
Info: ''Items: (69 entries)
0:
Bounds: x1=448, y1=234, x2=506, y2=254
Type: 4
Info: 'OK'
1:
Bounds: x1=368, y1=234, x2=426, y2=254
Type: 4
Info: 'Cancel'
2:
Bounds: x1=290, y1=230, x2=347, y2=250
Type: -128
Info: ''
3:
Bounds: x1=180, y1=60, x2=383, y2=80
Type: 6
Info: '0 - Striping, NO redundancy'
4:
Bounds: x1=180, y1=80, x2=370, y2=98
Type: 6
Info: '1 - Striping with mirror'
5:
Bounds: x1=180, y1=100, x2=411, y2=119
Type: 6
Info: '3 - Byte striping w/parity drive'
6:
Bounds: x1=180, y1=120, x2=393, y2=138
Type: 6
Info: '5 - Block striping with parity'
7:
Bounds: x1=273, y1=150, x2=348, y2=166
Type: 16
Info: ''
8:
Bounds: x1=273, y1=170, x2=348, y2=186
Type: 16
Info: ''
9:
Bounds: x1=273, y1=200, x2=348, y2=216
Type: 16
Info: ''
10:
Bounds: x1=50, y1=80, x2=66, y2=98
Type: 5
Info: ''
11:
Bounds: x1=70, y1=80, x2=87, y2=98
Type: 5
Info: ''
12:
Bounds: x1=90, y1=80, x2=107, y2=98
Type: 5
Info: ''
13:
Bounds: x1=110, y1=80, x2=127, y2=98
Type: 5
Info: ''
14:
Bounds: x1=130, y1=80, x2=147, y2=97
Type: 5
Info: ''
15:
Bounds: x1=50, y1=100, x2=66, y2=118
Type: 5
Info: ''
16:
Bounds: x1=70, y1=100, x2=87, y2=118
Type: 5
Info: ''
17:
Bounds: x1=90, y1=100, x2=107, y2=118
Type: 5
Info: ''
18:
Bounds: x1=110, y1=100, x2=127, y2=118
Type: 5
Info: ''
19:
Bounds: x1=130, y1=100, x2=147, y2=117
Type: 5
Info: ''
20:
Bounds: x1=50, y1=120, x2=66, y2=138
Type: 5
Info: ''
21:
Bounds: x1=70, y1=120, x2=87, y2=138
Type: 5
Info: ''
22:
Bounds: x1=90, y1=120, x2=107, y2=138
Type: 5
Info: ''
23:
Bounds: x1=110, y1=120, x2=127, y2=138
Type: 5
Info: ''
24:
Bounds: x1=130, y1=120, x2=147, y2=137
Type: 5
Info: ''
25:
Bounds: x1=50, y1=140, x2=66, y2=158
Type: 5
Info: ''
26:
Bounds: x1=70, y1=140, x2=87, y2=158
Type: 5
Info: ''
27:
Bounds: x1=90, y1=140, x2=107, y2=158
Type: 5
Info: ''
28:
Bounds: x1=110, y1=140, x2=127, y2=158
Type: 5
Info: ''
29:
Bounds: x1=130, y1=140, x2=147, y2=157
Type: 5
Info: ''
30:
Bounds: x1=50, y1=160, x2=66, y2=178
Type: -123
Info: ''
31:
Bounds: x1=70, y1=160, x2=87, y2=178
Type: -123
Info: ''
32:
Bounds: x1=90, y1=160, x2=107, y2=178
Type: -123
Info: ''
33:
Bounds: x1=110, y1=160, x2=127, y2=178
Type: -123
Info: ''
34:
Bounds: x1=130, y1=160, x2=147, y2=177
Type: -123
Info: ''
35:
Bounds: x1=50, y1=180, x2=66, y2=198
Type: -123
Info: ''
36:
Bounds: x1=70, y1=180, x2=87, y2=198
Type: -123
Info: ''
37:
Bounds: x1=90, y1=180, x2=107, y2=198
Type: -123
Info: ''
38:
Bounds: x1=110, y1=180, x2=127, y2=198
Type: -123
Info: ''
39:
Bounds: x1=130, y1=180, x2=147, y2=197
Type: -123
Info: ''
40:
Bounds: x1=50, y1=200, x2=66, y2=218
Type: -123
Info: ''
41:
Bounds: x1=70, y1=200, x2=87, y2=218
Type: -123
Info: ''
42:
Bounds: x1=90, y1=200, x2=107, y2=218
Type: -123
Info: ''
43:
Bounds: x1=110, y1=200, x2=127, y2=218
Type: -123
Info: ''
44:
Bounds: x1=130, y1=200, x2=147, y2=217
Type: -123
Info: ''
45:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
46:
Bounds: x1=140, y1=10, x2=396, y2=27
Type: -120
Info: 'DataDock Disk Array Controller Setup'
47:
Bounds: x1=0, y1=30, x2=512, y2=41
Type: -64
Info: 'L'
48:
Bounds: x1=160, y1=40, x2=235, y2=56
Type: -120
Info: 'RAID Level'
49:
Bounds: x1=353, y1=190, x2=498, y2=225
Type: -120
Info: '(RAID-0,1,5: 3-65535)
(RAID-3: 1)'
50:
Bounds: x1=150, y1=200, x2=268, y2=215
Type: -120
Info: 'LUN Segment Size'
51:
Bounds: x1=0, y1=220, x2=512, y2=232
Type: -64
Info: 'L'
52:
Bounds: x1=171, y1=170, x2=270, y2=185
Type: -120
Info: 'LUN Block Size'
53:
Bounds: x1=154, y1=135, x2=411, y2=146
Type: -64
Info: 'L'
54:
Bounds: x1=30, y1=80, x2=43, y2=96
Type: -120
Info: '0'
55:
Bounds: x1=30, y1=100, x2=43, y2=116
Type: -120
Info: '1'
56:
Bounds: x1=30, y1=120, x2=43, y2=136
Type: -120
Info: '2'
57:
Bounds: x1=30, y1=140, x2=43, y2=156
Type: -120
Info: '3'
58:
Bounds: x1=30, y1=160, x2=43, y2=176
Type: -120
Info: '4'
59:
Bounds: x1=30, y1=180, x2=43, y2=196
Type: -120
Info: '5'
60:
Bounds: x1=30, y1=200, x2=43, y2=216
Type: -120
Info: '6'
61:
Bounds: x1=50, y1=60, x2=63, y2=76
Type: -120
Info: '1'
62:
Bounds: x1=70, y1=60, x2=83, y2=76
Type: -120
Info: '2'
63:
Bounds: x1=90, y1=60, x2=103, y2=76
Type: -120
Info: '3'
64:
Bounds: x1=110, y1=60, x2=123, y2=76
Type: -120
Info: '4'
65:
Bounds: x1=130, y1=60, x2=143, y2=76
Type: -120
Info: '5'
66:
Bounds: x1=70, y1=40, x2=128, y2=56
Type: -120
Info: 'Channel'
67:
Bounds: x1=0, y1=80, x2=24, y2=96
Type: -120
Info: 'ID'
68:
Bounds: x1=185, y1=150, x2=268, y2=165
Type: -120
Info: 'LUN Number'WARNING: Partition map is corrupted. Proceed with caution.
Check SCSI Cables, and other device related aspects that affect 'normal' Macintosh communication.
scsiBusy (-7887)
SCSI subsystem is busy.
Transoft SCSI Director‚Ñ¢ is a SCSI storage device
The resident driver for that device is being used to mount the device, if this doesn't work, or all partitions don't show up, then try rebooting.
•COPY—
00, NO ADDITIONAL SENSE INFORMATION.
megabytes
Items: (9 entries)
0:
Bounds: x1=424, y1=16, x2=484, y2=36
Type: 4
Info: 'OK'
1:
Bounds: x1=352, y1=16, x2=412, y2=36
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ''
3:
Bounds: x1=48, y1=16, x2=347, y2=33
Type: -120
Info: 'Modify Partition Size (by total Block Count)'
4:
Bounds: x1=108, y1=60, x2=487, y2=77
Type: -120
Info: 'Total Blocks desired for new Partition size.'
5:
Bounds: x1=6, y1=83, x2=487, y2=101
Type: -120
Info: 'Note: A single block usually represents only 1/2048th of a Megabyte.'
6:
Bounds: x1=0, y1=41, x2=500, y2=54
Type: -64
Info: 'L'
7:
Bounds: x1=10, y1=60, x2=99, y2=76
Type: 16
Info: ''
8:
Bounds: x1=424, y1=8, x2=488, y2=32
Type: -128
Info: ''Sorry! Because neutralizing the SCSI driver failed, you must choose again.
The driver seems to be restored! Mount it, or restart, if you wish.
Read Ahead is currently disabled.
Enter ending block number to copy
SCSI Technology
Use Blind Writes if possible?
scsiBDRsent (-7913)
A SCSI BDR message was sent to target.
13, DATA ADDRESS MARK NOT FOUND.
1F, RESERVED.
19, DEFECT LIST ERROR.
Macintosh IIcx
Bit field for partition status
mb available for partitioning. It will become an Apple_Free partition.
Macintosh
This drive contains no initialized Macintosh volumes.
Macintosh PowerBook
Items: (22 entries)
0:
Bounds: x1=0, y1=0, x2=400, y2=27
Type: -64
Info: ' Ä'
1:
Bounds: x1=27, y1=39, x2=366, y2=49
Type: -128
Info: ''
2:
Bounds: x1=0, y1=56, x2=400, y2=74
Type: -128
Info: ''
3:
Bounds: x1=4, y1=90, x2=393, y2=232
Type: -128
Info: ''
4:
Bounds: x1=23, y1=81, x2=140, y2=97
Type: -120
Info: 'Copy Statistics'
5:
Bounds: x1=60, y1=106, x2=122, y2=115
Type: -120
Info: 'Total Files'
6:
Bounds: x1=40, y1=128, x2=122, y2=137
Type: -120
Info: 'Remaining Folders'
7:
Bounds: x1=91, y1=151, x2=122, y2=160
Type: -120
Info: 'Size'
8:
Bounds: x1=50, y1=174, x2=122, y2=183
Type: -120
Info: 'Elapsed Time'
9:
Bounds: x1=126, y1=105, x2=199, y2=121
Type: -128
Info: ''
10:
Bounds: x1=126, y1=127, x2=199, y2=143
Type: -128
Info: ''
11:
Bounds: x1=126, y1=150, x2=199, y2=166
Type: -128
Info: ''
12:
Bounds: x1=126, y1=173, x2=199, y2=189
Type: -128
Info: ''
13:
Bounds: x1=22, y1=198, x2=122, y2=207
Type: -120
Info: 'Est. Time Remaining'
14:
Bounds: x1=126, y1=197, x2=252, y2=213
Type: -128
Info: ''
15:
Bounds: x1=262, y1=106, x2=306, y2=115
Type: -120
Info: 'Copied'
16:
Bounds: x1=249, y1=132, x2=306, y2=141
Type: -120
Info: 'Remaining'
17:
Bounds: x1=215, y1=159, x2=306, y2=168
Type: -120
Info: 'Total Throughput'
18:
Bounds: x1=310, y1=105, x2=383, y2=121
Type: -128
Info: ''
19:
Bounds: x1=310, y1=131, x2=383, y2=147
Type: -128
Info: ''
20:
Bounds: x1=310, y1=158, x2=383, y2=174
Type: -128
Info: ''
21:
Bounds: x1=325, y1=181, x2=369, y2=225
Type: -128
Info: ''PowerBook 145
Write permission not granted (-61)
8E, RESERVED.
9C, RESERVED.
Macintosh IIvx
Power Macintosh 7100/66
Quadra 630/PPC Upgrade
Macintosh PowerBook
LC 550
SCSIComplete failed with CHECK CONDITION status.
A8, RESERVED.
Power Macintosh 7200
8C, RESERVED.
I/O Error (Bad Media?) (-36)
Centris 610
Reserved Integer
Macintosh
9A, RESERVED.
Macintosh
Macintosh
Partitioning will destroy all data on the drive. Proceed with partitioning of device
21, INVALID BLOCK ADDRESS.
Macintosh II
Items: (3 entries)
0:
Bounds: x1=438, y1=295, x2=496, y2=315
Type: 4
Info: 'OK'
1:
Bounds: x1=353, y1=295, x2=411, y2=315
Type: 0
Info: ''
2:
Bounds: x1=1, y1=2, x2=505, y2=288
Type: -128
Info: ''1B, RESERVED.
scsiNoNexus (-7911)
Nexus is not established.
Power User
Setup cannot be performed on a volume with open files such as the Startup and Application volume.
Reassign completed!
Select a solution, for initializing new partitions continue. (For this step, choice '1' is preferred)
All possible volumes of the device have been unmounted.
] but could not allocate without endangering free space.
Select ID and operation to perform.
02, COMMAND COMPLETE.
Notice: A Mac Volume could not be unmounted by this current action. It was in use. "Restart" for a Mirror changes to take place.
Sorry. This version relies upon the proper alternate SCSI bus program for all mounting.
Would you like to detach all its Mirror Copies, eliminating Mirroring, and freeing up their contents?
Macintosh Operating System HFS partitioning.
formatting, partitioning, and installing a device driver.
scsiDeviceNotThere (-7885)
SCSI device not installed or available.
Items: (28 entries)
0:
Bounds: x1=420, y1=255, x2=478, y2=275
Type: 4
Info: 'OK'
1:
Bounds: x1=340, y1=255, x2=398, y2=275
Type: 4
Info: 'Cancel'
2:
Bounds: x1=270, y1=255, x2=327, y2=275
Type: -128
Info: ''
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=190, y1=10, x2=310, y2=27
Type: -120
Info: 'DataDock Control'
5:
Bounds: x1=0, y1=30, x2=500, y2=43
Type: -64
Info: 'L'
6:
Bounds: x1=0, y1=70, x2=501, y2=81
Type: -64
Info: 'L'
7:
Bounds: x1=0, y1=240, x2=510, y2=251
Type: -64
Info: 'L'
8:
Bounds: x1=10, y1=40, x2=81, y2=73
Type: -120
Info: 'SCSI Channel #'
9:
Bounds: x1=90, y1=57, x2=298, y2=72
Type: -120
Info: 'Status Byte, Status/Sub-Status'
10:
Bounds: x1=310, y1=40, x2=391, y2=74
Type: -120
Info: 'Mode Select Status'
11:
Bounds: x1=30, y1=92, x2=47, y2=109
Type: -120
Info: '1'
12:
Bounds: x1=30, y1=122, x2=47, y2=139
Type: -120
Info: '2'
13:
Bounds: x1=30, y1=152, x2=47, y2=169
Type: -120
Info: '3'
14:
Bounds: x1=30, y1=182, x2=47, y2=199
Type: -120
Info: '4'
15:
Bounds: x1=30, y1=212, x2=47, y2=229
Type: -120
Info: '5'
16:
Bounds: x1=80, y1=90, x2=319, y2=120
Type: -128
Info: ''
17:
Bounds: x1=80, y1=120, x2=319, y2=150
Type: -128
Info: ''
18:
Bounds: x1=80, y1=150, x2=319, y2=180
Type: -128
Info: ''
19:
Bounds: x1=80, y1=180, x2=319, y2=210
Type: -128
Info: ''
20:
Bounds: x1=80, y1=210, x2=319, y2=240
Type: -128
Info: ''
21:
Bounds: x1=330, y1=94, x2=369, y2=110
Type: 16
Info: ''
22:
Bounds: x1=330, y1=124, x2=369, y2=140
Type: 16
Info: ''
23:
Bounds: x1=330, y1=154, x2=369, y2=170
Type: 16
Info: ''
24:
Bounds: x1=330, y1=184, x2=369, y2=200
Type: 16
Info: ''
25:
Bounds: x1=330, y1=214, x2=369, y2=230
Type: 16
Info: ''
26:
Bounds: x1=140, y1=40, x2=260, y2=55
Type: -120
Info: 'Mode Sense Data'
27:
Bounds: x1=376, y1=80, x2=502, y2=165
Type: -120
Info: 'Add = 128,
Delete = 129,
Fail = 131,
Replace and reconstruct = 132.'Items: (40 entries)
0:
Bounds: x1=424, y1=16, x2=484, y2=36
Type: 4
Info: 'OK'
1:
Bounds: x1=352, y1=16, x2=412, y2=36
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ''
3:
Bounds: x1=48, y1=16, x2=280, y2=32
Type: -120
Info: 'Modify Partition Map Entry Dialog'
4:
Bounds: x1=39, y1=56, x2=159, y2=72
Type: -120
Info: 'pmSigPad (2 byte)'
5:
Bounds: x1=13, y1=80, x2=165, y2=96
Type: -120
Info: 'pmMapBlkCnt (4 byte)'
6:
Bounds: x1=7, y1=104, x2=167, y2=120
Type: -120
Info: 'pmPyPartStart (4 byte)'
7:
Bounds: x1=21, y1=128, x2=165, y2=144
Type: -120
Info: 'pmParBlkCnt (4 byte)'
8:
Bounds: x1=15, y1=224, x2=167, y2=240
Type: -120
Info: 'pmPartName (32 char)'
9:
Bounds: x1=29, y1=248, x2=165, y2=264
Type: -120
Info: 'pmParType (32 char)'
10:
Bounds: x1=8, y1=152, x2=168, y2=168
Type: -120
Info: 'pmLgDataStart (4 byte)'
11:
Bounds: x1=34, y1=176, x2=170, y2=192
Type: -120
Info: 'pmDataCnt (4 byte)'
12:
Bounds: x1=16, y1=200, x2=168, y2=216
Type: -120
Info: 'pmPartStatus (4 byte)'
13:
Bounds: x1=250, y1=56, x2=410, y2=72
Type: -120
Info: 'pmLgBootStart (4 byte)'
14:
Bounds: x1=272, y1=80, x2=408, y2=96
Type: -120
Info: 'pmBootSize (4 byte)'
15:
Bounds: x1=269, y1=104, x2=413, y2=120
Type: -120
Info: 'pmBootAddr (4 byte)'
16:
Bounds: x1=261, y1=128, x2=413, y2=144
Type: -120
Info: 'pmBootAddr2 (4 byte)'
17:
Bounds: x1=264, y1=152, x2=408, y2=168
Type: -120
Info: 'pmBootEntry (4 byte)'
18:
Bounds: x1=255, y1=176, x2=407, y2=192
Type: -120
Info: 'pmBootEntry2 (4 byte)'
19:
Bounds: x1=255, y1=200, x2=407, y2=216
Type: -120
Info: 'pmBootCksum (4 byte)'
20:
Bounds: x1=14, y1=272, x2=166, y2=288
Type: -120
Info: 'pmProcessor (16 char)'
21:
Bounds: x1=0, y1=41, x2=500, y2=54
Type: -64
Info: 'L'
22:
Bounds: x1=176, y1=56, x2=240, y2=72
Type: 16
Info: ''
23:
Bounds: x1=176, y1=80, x2=264, y2=96
Type: 16
Info: ''
24:
Bounds: x1=176, y1=104, x2=264, y2=120
Type: 16
Info: ''
25:
Bounds: x1=176, y1=128, x2=256, y2=144
Type: 16
Info: ''
26:
Bounds: x1=176, y1=152, x2=256, y2=168
Type: 16
Info: ''
27:
Bounds: x1=176, y1=176, x2=248, y2=192
Type: 16
Info: ''
28:
Bounds: x1=176, y1=200, x2=248, y2=216
Type: 16
Info: ''
29:
Bounds: x1=176, y1=224, x2=496, y2=240
Type: 16
Info: ''
30:
Bounds: x1=176, y1=248, x2=496, y2=264
Type: 16
Info: ''
31:
Bounds: x1=176, y1=272, x2=384, y2=288
Type: 16
Info: ''
32:
Bounds: x1=416, y1=56, x2=496, y2=72
Type: 16
Info: ''
33:
Bounds: x1=416, y1=80, x2=496, y2=96
Type: 16
Info: ''
34:
Bounds: x1=416, y1=104, x2=496, y2=120
Type: 16
Info: ''
35:
Bounds: x1=416, y1=128, x2=496, y2=144
Type: 16
Info: ''
36:
Bounds: x1=416, y1=152, x2=496, y2=168
Type: 16
Info: ''
37:
Bounds: x1=416, y1=176, x2=496, y2=192
Type: 16
Info: ''
38:
Bounds: x1=416, y1=200, x2=496, y2=216
Type: 16
Info: ''
39:
Bounds: x1=424, y1=8, x2=488, y2=32
Type: -128
Info: ''Items: (9 entries)
0:
Bounds: x1=335, y1=277, x2=389, y2=297
Type: 4
Info: 'OK'
1:
Bounds: x1=19, y1=52, x2=395, y2=269
Type: -128
Info: ''
2:
Bounds: x1=181, y1=277, x2=314, y2=297
Type: 4
Info: 'Save as TeachText'
3:
Bounds: x1=60, y1=0, x2=374, y2=18
Type: -128
Info: ''
4:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
5:
Bounds: x1=0, y1=32, x2=411, y2=47
Type: -64
Info: 'L'
6:
Bounds: x1=30, y1=278, x2=176, y2=301
Type: -128
Info: ''
7:
Bounds: x1=130, y1=20, x2=339, y2=32
Type: -128
Info: ''
8:
Bounds: x1=107, y1=18, x2=130, y2=34
Type: -120
Info: 'C'Items: (15 entries)
0:
Bounds: x1=220, y1=256, x2=278, y2=276
Type: 4
Info: 'OK'
1:
Bounds: x1=140, y1=256, x2=198, y2=276
Type: 4
Info: 'Cancel'
2:
Bounds: x1=30, y1=250, x2=87, y2=270
Type: -128
Info: ''
3:
Bounds: x1=5, y1=2, x2=37, y2=34
Type: -96
Info: ''
4:
Bounds: x1=60, y1=10, x2=239, y2=29
Type: -120
Info: 'Sneakernet Configuration'
5:
Bounds: x1=0, y1=30, x2=293, y2=43
Type: -64
Info: 'L'
6:
Bounds: x1=-10, y1=240, x2=293, y2=252
Type: -64
Info: 'L'
7:
Bounds: x1=101, y1=44, x2=140, y2=60
Type: 16
Info: ''
8:
Bounds: x1=6, y1=43, x2=97, y2=62
Type: -120
Info: 'Scan interval'
9:
Bounds: x1=23, y1=109, x2=123, y2=129
Type: 7
Info: 'Ë'
10:
Bounds: x1=23, y1=135, x2=123, y2=155
Type: 7
Info: 'È'
11:
Bounds: x1=23, y1=161, x2=123, y2=181
Type: 7
Info: 'Í'
12:
Bounds: x1=54, y1=220, x2=112, y2=240
Type: 4
Info: 'Add'
13:
Bounds: x1=187, y1=220, x2=245, y2=240
Type: 4
Info: 'Remove'
14:
Bounds: x1=127, y1=78, x2=287, y2=210
Type: 0
Info: ''scsiProvideFail (-7886)
Unable to provide the requested service.
setup application that prepares the SCSI device for use by
Select the partitioning method you wish to use with the device.
This is declared as a Mirrored partition, but the Mirror Master is not currently available! Do you want to detach the Mirror Copies?
Warning: Mirroring problems with existing setup were detected. Show Details?
This option should be used only by advanced users. Do you want to activate the "Special" menu?
03, DRIVE FAULT.
Perhaps try increasing this program's memory and rerunning the program?
Awaiting volumes to initialize (if any) for device
NOTE: The device altered its block count after formatting. This is normal for MO disks.
Reassign failed!
Format cannot be performed on a volume with open files such as the Startup and Application volume.
Product Description
scsiTerminated (-7912)
Parameter block request terminated by the host.
Macintosh SE
1A, PARAMETER OVERRUN.
20, INVALID COMMAND.
Partitioning was successful!
Macintosh TV
Quadra 605
Macintosh IIvm
9B, RESERVED.
File is not open (-38)
8D, RESERVED.
VENDOR IDENTIFICATION
Macintosh
Macintosh
Macintosh
A9, RESERVED.
Power Macintosh 7100/80
Macintosh PowerBook
A4, RESERVED.
AA, RESERVED.
Performa 46x
Menu ID: 134
ProcID: 0
Enabled flags: 0xFE007FFB
Title: 'Help'
Items: (zero-terminated list)
0:
Name: 'Please Read (Latest Info)...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Power User's Summary...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Product Description...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'SCSI Technology Overview...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: 'Usage Conditions...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Main Window Overview...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Preparing New Devices...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: 'Partition Options...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: 'Updating Existing Devices...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: 'Using the Control Panel...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: 'Testing the Performance...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
12:
Name: 'Utilities Menu...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
13:
Name: 'Advanced Features...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00PowerBook 165c
9E, RESERVED.
Select second SCSI Device containing data you wish to compare (may be same as first):
Reserved Nibble
Driver update successfully completed.
log. # of partition's 1st data blk
Macintosh Portable
scsiParityError (-7921)
An uncorrectable parity error occurred.
11, UNRECOVERED DATA ERROR.
Do you wish to enable read ahead cache?
The device doesn't support that feature or this program doesn't support it for the device.
Automatic verify and reassign had trouble and failed.
. CLICK TO CONTINUE. Free Memory =
Allocate nearly all the remaining blocks to a "Free A/UX slice 3" partition?
Error reading partition control information for a partition!
Items: (16 entries)
0:
Bounds: x1=256, y1=144, x2=336, y2=162
Type: 4
Info: 'Open'
1:
Bounds: x1=699, y1=0, x2=717, y2=80
Type: 4
Info: 'Hidden'
2:
Bounds: x1=256, y1=261, x2=336, y2=279
Type: 4
Info: 'Cancel'
3:
Bounds: x1=227, y1=64, x2=347, y2=84
Type: -128
Info: ''
4:
Bounds: x1=256, y1=93, x2=336, y2=111
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=116, x2=336, y2=134
Type: 4
Info: 'Drive'
6:
Bounds: x1=8, y1=63, x2=226, y2=274
Type: 0
Info: ''
7:
Bounds: x1=225, y1=63, x2=243, y2=274
Type: 0
Info: ''
8:
Bounds: x1=240, y1=88, x2=341, y2=89
Type: -128
Info: ''
9:
Bounds: x1=660, y1=0, x2=756, y2=101
Type: -120
Info: ''
10:
Bounds: x1=48, y1=8, x2=336, y2=24
Type: -120
Info: ''
11:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
12:
Bounds: x1=0, y1=32, x2=349, y2=40
Type: -64
Info: 'L'
13:
Bounds: x1=248, y1=182, x2=345, y2=217
Type: 4
Info: 'Select
File or Folder'
14:
Bounds: x1=250, y1=220, x2=346, y2=260
Type: -128
Info: ''
15:
Bounds: x1=10, y1=40, x2=29, y2=59
Type: -128
Info: ''Error writing partition control information to partition! (write protected?)
Enter the size, in blocks, of the A/UX Free partition (slice 3.)
Date:
Automatic verify and reassign complete!
Select "Partition..." as the next step if you are completely setting up the device manually.
Read Ahead is currently enabled.
10, ID FIELD CRC ERROR.
scsiSCSIBusReset (-7922)
Execution of this parameter block was halted due to a SCSI bus reset.
Macintosh SE/30
# of blks in partition's data area
Drive initialization successfully completed.
Quadra 800/PPC Upgrade
Select first SCSI Device containing data you wish to compare:
Response Data Format
Macintosh Color Classic
9F, RESERVED.
AB, RESERVED.
Menu ID: 135
ProcID: 0
Enabled flags: 0xFFEBFEFB
Title: 'Special'
Items: (zero-terminated list)
0:
Name: 'Setup Many Devices...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Check Partition Map Quality'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Write Partition Map Only...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Modify Partition Map…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: 'Write Partition Entry…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Clear range of blocks...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: 'Reset SCSI Bus…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: 'Prevent-Allow Removal…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: 'Enable-Disable read ahead…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: 'Start-Stop SCSI…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
12:
Name: 'Send-Receive Diagnostic…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
13:
Name: 'Reassign Block...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
14:
Name: 'Auto Verify & Reassign...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
15:
Name: 'Change SCSI ID...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
16:
Name: 'Resurrect a Neutralized Driver...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
17:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
18:
Name: 'Driver Options...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
19:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
20:
Name: 'Resume Scanning'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00 Macintosh
Power Macintosh 6100/60
A5, RESERVED.
Macintosh
AD, RESERVED.
A7, RESERVED.
Macintosh
PowerBook Duo 270c
Request Sense Length
Select the ending block to compare on the first device. (last possible is shown):
Quadra 610/PPC Upgrade
Testing was successful.
Macintosh
Proceeding with partition map block writing…
TYPE
scsiIdentifyMessageRejected (-7924)
The target issued a REJECT message in response to the IDENTIFY message; the LUN probably does not exist.
1C, RESERVED.
0E, RESERVED.
The partition map was found to be inconsistent.
Items: (8 entries)
0:
Bounds: x1=0, y1=0, x2=383, y2=269
Type: -128
Info: ''
1:
Bounds: x1=18, y1=60, x2=173, y2=236
Type: -128
Info: ''
2:
Bounds: x1=174, y1=51, x2=356, y2=63
Type: -128
Info: ''
3:
Bounds: x1=174, y1=63, x2=356, y2=75
Type: -128
Info: ''
4:
Bounds: x1=174, y1=75, x2=356, y2=87
Type: -128
Info: ''
5:
Bounds: x1=174, y1=98, x2=356, y2=110
Type: -128
Info: ''
6:
Bounds: x1=174, y1=110, x2=356, y2=122
Type: -128
Info: ''
7:
Bounds: x1=174, y1=122, x2=356, y2=134
Type: -128
Info: ''Should I spin down the device?
Enabling/Disabling of read ahead cache was successful!
Start/Stop of SCSI device failed!
Items: (11 entries)
0:
Bounds: x1=409, y1=134, x2=469, y2=154
Type: 4
Info: 'OK'
1:
Bounds: x1=335, y1=134, x2=395, y2=154
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=11, y1=90, x2=479, y2=106
Type: 6
Info: 'Setup a pair of mirrored partitions completely'
4:
Bounds: x1=11, y1=106, x2=480, y2=122
Type: -122
Info: 'Attach another mirrored partition to an existing set of them'
5:
Bounds: x1=43, y1=130, x2=75, y2=158
Type: -128
Info: ''
6:
Bounds: x1=0, y1=32, x2=486, y2=43
Type: -64
Info: 'L'
7:
Bounds: x1=1, y1=120, x2=486, y2=132
Type: -64
Info: 'L'
8:
Bounds: x1=39, y1=1, x2=467, y2=36
Type: -120
Info: 'You are about to set up some mirrored partitions.
Select "Important Help" for more information'
9:
Bounds: x1=16, y1=45, x2=467, y2=82
Type: -128
Info: ''
10:
Bounds: x1=193, y1=134, x2=320, y2=155
Type: 4
Info: 'Important Help...'Critical Memory problem: Bytes needed [
Enter the size, in blocks, of the A/UX Swap partition.
Mirroring setup attempt cancelled.
Mirroring Setup successful! You must restart your computer to initiate mirroring. Do not try to mount the mirrored partitions until restarted.
Enter the size, in blocks, of the A/UX Eschatology partition.
Despite the detected Mirroring problems, continue with selected utility anyway?
Time:
Start/Stop of SCSI device was successful!
Proceed with disabling read ahead cache for the SCSI device?
Should I prevent removal of the device?
0F, RESERVED.
Bad news! This disk was prepared with Apple's pre March '87 partitioning technique. To upgrade, it must be re-partitioned. (Back up the files to save, first, of course!)
1D, RESERVED.
scsiMessageRejectReceived (-7923)
REJECT message received.
NAME
Enter partition map entry number to read
is an active drive or has open files.
Macintosh LC 475
Items: (28 entries)
0:
Bounds: x1=0, y1=0, x2=400, y2=27
Type: -64
Info: ' Ä'
1:
Bounds: x1=107, y1=31, x2=169, y2=40
Type: -120
Info: 'Source'
2:
Bounds: x1=268, y1=31, x2=350, y2=40
Type: -120
Info: 'Destination'
3:
Bounds: x1=8, y1=46, x2=63, y2=55
Type: -120
Info: 'Device'
4:
Bounds: x1=9, y1=65, x2=64, y2=74
Type: -120
Info: 'Blocks'
5:
Bounds: x1=8, y1=84, x2=63, y2=93
Type: -120
Info: 'Where'
6:
Bounds: x1=71, y1=113, x2=135, y2=122
Type: -120
Info: 'Start Block'
7:
Bounds: x1=148, y1=113, x2=212, y2=122
Type: -120
Info: 'End Block'
8:
Bounds: x1=225, y1=113, x2=283, y2=122
Type: -120
Info: 'K/sec'
9:
Bounds: x1=24, y1=127, x2=68, y2=136
Type: -120
Info: 'Read'
10:
Bounds: x1=24, y1=147, x2=68, y2=156
Type: -120
Info: 'Write'
11:
Bounds: x1=0, y1=103, x2=400, y2=106
Type: -128
Info: ''
12:
Bounds: x1=71, y1=44, x2=224, y2=60
Type: -128
Info: ''
13:
Bounds: x1=71, y1=63, x2=224, y2=79
Type: -128
Info: ''
14:
Bounds: x1=71, y1=82, x2=224, y2=98
Type: -128
Info: ''
15:
Bounds: x1=235, y1=44, x2=388, y2=60
Type: -128
Info: ''
16:
Bounds: x1=235, y1=63, x2=388, y2=79
Type: -128
Info: ''
17:
Bounds: x1=235, y1=82, x2=388, y2=98
Type: -128
Info: ''
18:
Bounds: x1=71, y1=125, x2=144, y2=141
Type: -128
Info: ''
19:
Bounds: x1=148, y1=125, x2=221, y2=141
Type: -128
Info: ''
20:
Bounds: x1=225, y1=125, x2=298, y2=141
Type: -128
Info: ''
21:
Bounds: x1=71, y1=145, x2=144, y2=161
Type: -128
Info: ''
22:
Bounds: x1=148, y1=145, x2=221, y2=161
Type: -128
Info: ''
23:
Bounds: x1=225, y1=145, x2=298, y2=161
Type: -128
Info: ''
24:
Bounds: x1=71, y1=165, x2=298, y2=181
Type: -128
Info: ''
25:
Bounds: x1=2, y1=187, x2=68, y2=196
Type: -120
Info: 'Remaining'
26:
Bounds: x1=72, y1=185, x2=218, y2=200
Type: -128
Info: ''
27:
Bounds: x1=344, y1=157, x2=388, y2=201
Type: -128
Info: '' Additional Length
Select the starting block on the second device to compare against:
Omega
Macintosh
A6, RESERVED.
Quadra 840 AV
Power Macintosh 8100/60
AC, RESERVED.
Device Type Qualifier
B0, No Cartridge
Malcolm
Menu ID: 132
ProcID: 0
Enabled flags: 0xFFFFFDD7
Title: 'View'
Items: (zero-terminated list)
0:
Name: 'Block Display...'
Icon number: 0
Key equivalent: 'B' (0x42)
Mark character: 0x0
Style: 0x00
1:
Name: 'Device Information…'
Icon number: 0
Key equivalent: 'I' (0x49)
Mark character: 0x0
Style: 0x00
2:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Show Setup Window'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Power Macintosh 8500
Macintosh
A2, RESERVED.
Macintosh
Initializing drive... formatting in progress.
Items: (45 entries)
0:
Bounds: x1=15, y1=12, x2=97, y2=24
Type: -120
Info: 'Vendor'
1:
Bounds: x1=15, y1=33, x2=97, y2=45
Type: -120
Info: 'Product'
2:
Bounds: x1=15, y1=52, x2=97, y2=64
Type: -120
Info: 'Firmware'
3:
Bounds: x1=15, y1=72, x2=97, y2=84
Type: -120
Info: 'Peripheral Type'
4:
Bounds: x1=15, y1=92, x2=97, y2=104
Type: -120
Info: 'Removable Media'
5:
Bounds: x1=15, y1=112, x2=97, y2=124
Type: -120
Info: 'Device Type'
6:
Bounds: x1=15, y1=132, x2=97, y2=144
Type: -120
Info: 'ANSI Version'
7:
Bounds: x1=15, y1=152, x2=97, y2=164
Type: -120
Info: 'Reserved Nibble'
8:
Bounds: x1=15, y1=172, x2=97, y2=184
Type: -120
Info: 'Response Format'
9:
Bounds: x1=15, y1=192, x2=97, y2=204
Type: -120
Info: 'Additional Length'
10:
Bounds: x1=15, y1=213, x2=97, y2=225
Type: -120
Info: 'Sense Length'
11:
Bounds: x1=15, y1=234, x2=97, y2=246
Type: -120
Info: 'Reserved Integer'
12:
Bounds: x1=234, y1=12, x2=316, y2=24
Type: -120
Info: 'Size'
13:
Bounds: x1=234, y1=33, x2=316, y2=45
Type: -120
Info: 'OS Setup'
14:
Bounds: x1=234, y1=52, x2=316, y2=64
Type: -120
Info: 'Partitions'
15:
Bounds: x1=234, y1=72, x2=316, y2=84
Type: -120
Info: 'Map Status'
16:
Bounds: x1=234, y1=92, x2=316, y2=104
Type: -120
Info: 'LUNS available'
17:
Bounds: x1=234, y1=112, x2=316, y2=124
Type: -120
Info: 'Optimization'
18:
Bounds: x1=152, y1=132, x2=218, y2=144
Type: -120
Info: 'Driver'
19:
Bounds: x1=234, y1=152, x2=316, y2=164
Type: -120
Info: 'Options'
20:
Bounds: x1=100, y1=11, x2=220, y2=27
Type: -128
Info: ''
21:
Bounds: x1=100, y1=31, x2=220, y2=47
Type: -128
Info: ''
22:
Bounds: x1=100, y1=51, x2=220, y2=67
Type: -128
Info: ''
23:
Bounds: x1=100, y1=71, x2=150, y2=87
Type: -128
Info: ''
24:
Bounds: x1=100, y1=91, x2=150, y2=107
Type: -128
Info: ''
25:
Bounds: x1=100, y1=111, x2=150, y2=127
Type: -128
Info: ''
26:
Bounds: x1=100, y1=131, x2=150, y2=147
Type: -128
Info: ''
27:
Bounds: x1=100, y1=151, x2=150, y2=167
Type: -128
Info: ''
28:
Bounds: x1=100, y1=171, x2=150, y2=187
Type: -128
Info: ''
29:
Bounds: x1=100, y1=191, x2=150, y2=207
Type: -128
Info: ''
30:
Bounds: x1=100, y1=212, x2=150, y2=228
Type: -128
Info: ''
31:
Bounds: x1=100, y1=233, x2=150, y2=249
Type: -128
Info: ''
32:
Bounds: x1=321, y1=11, x2=421, y2=27
Type: -128
Info: ''
33:
Bounds: x1=321, y1=31, x2=421, y2=47
Type: -128
Info: ''
34:
Bounds: x1=321, y1=51, x2=421, y2=67
Type: -128
Info: ''
35:
Bounds: x1=321, y1=71, x2=421, y2=87
Type: -128
Info: ''
36:
Bounds: x1=321, y1=91, x2=421, y2=107
Type: -128
Info: ''
37:
Bounds: x1=321, y1=111, x2=421, y2=127
Type: -128
Info: ''
38:
Bounds: x1=221, y1=131, x2=421, y2=147
Type: -128
Info: ''
39:
Bounds: x1=321, y1=151, x2=421, y2=253
Type: -128
Info: ''
40:
Bounds: x1=152, y1=171, x2=318, y2=253
Type: -128
Info: ''
41:
Bounds: x1=199, y1=176, x2=271, y2=214
Type: -128
Info: ''
42:
Bounds: x1=203, y1=179, x2=267, y2=211
Type: -64
Info: ' œ'
43:
Bounds: x1=185, y1=216, x2=285, y2=232
Type: -128
Info: ''
44:
Bounds: x1=155, y1=233, x2=315, y2=249
Type: -128
Info: '' Signature Pad
0B, RESERVED.
scsiUnused11 (-7919)
27, WRITE PROTECTED.
Select "Mount..." as the next step if you are completely setting up the device manually.
Should I eject the device?
Testing cannot be performed on a volume with open files such as the Startup and Application volume.
Choice B
500363
ID
08, RESERVED.
Mirroring Utility option cancelled.
Enter the size, in blocks, of the A/UX Root partition.
blocks?
Serious Error: The partitioning you selected is not possible due to adverse undersize calculations. Partitioning cancelled.
Items: (7 entries)
0:
Bounds: x1=184, y1=160, x2=264, y2=184
Type: 4
Info: 'Continue'
1:
Bounds: x1=80, y1=160, x2=160, y2=184
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=40, x2=264, y2=152
Type: -120
Info: 'This command will do a SCSI level block compare of devices. You specify the two devices to compare by their addresses (0-6). Results of the comparison will be saved in a file you name before the command begins.'
3:
Bounds: x1=0, y1=0, x2=32, y2=32
Type: -96
Info: ''
4:
Bounds: x1=0, y1=32, x2=272, y2=40
Type: -64
Info: 'L'
5:
Bounds: x1=48, y1=8, x2=192, y2=24
Type: -120
Info: 'SCSI Block Compare'
6:
Bounds: x1=0, y1=152, x2=272, y2=160
Type: -64
Info: 'L'#####
##TOO BIG##
OK to continue setting up for A/UX version 3.0x, instead of for old A/UX 2.0x?
What do you wish to do with the remaining
Fatal Error! Programming error resulted in failure of accounting for all mirror partition participants!
The device is too small for the minimum sized A/UX System Drive. Do you wish to proceed anyway?
Items: (15 entries)
0:
Bounds: x1=416, y1=251, x2=476, y2=271
Type: 4
Info: 'OK'
1:
Bounds: x1=342, y1=251, x2=402, y2=271
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=11, y1=47, x2=479, y2=63
Type: 6
Info: '1: Scan all connected devices, looking for mirroring irregularities.'
4:
Bounds: x1=11, y1=96, x2=480, y2=112
Type: 6
Info: '2: Detach a Mirrored Partition Copy (from a set of 3 or more).'
5:
Bounds: x1=11, y1=144, x2=480, y2=160
Type: 6
Info: '3: Detach all Mirroring of a particular Mirror Master partition.'
6:
Bounds: x1=11, y1=191, x2=482, y2=208
Type: 6
Info: '4: Compare all copies of a Mirror Master partition for deviations.'
7:
Bounds: x1=43, y1=243, x2=75, y2=275
Type: -128
Info: ''
8:
Bounds: x1=0, y1=34, x2=491, y2=45
Type: -64
Info: 'L'
9:
Bounds: x1=1, y1=235, x2=491, y2=247
Type: -64
Info: 'L'
10:
Bounds: x1=37, y1=2, x2=381, y2=33
Type: -120
Info: 'Mirroring Utilities : These features are intended for management of existing Mirrored Partitions'
11:
Bounds: x1=30, y1=65, x2=481, y2=91
Type: -128
Info: ''
12:
Bounds: x1=30, y1=114, x2=481, y2=139
Type: -128
Info: ''
13:
Bounds: x1=30, y1=162, x2=481, y2=187
Type: -128
Info: ''
14:
Bounds: x1=29, y1=210, x2=482, y2=234
Type: -128
Info: ''09, RESERVED.
You must enter a value in the range[
Unable to unmount the Source device, proceed with the copy anyway?
The SCSI bus has been reset!
To make the device startup, you must now quit and copy a System Folder onto it.
26, ILLEGAL FIELD IN PARAMETER LIST.
scsiAutosenseFailed (-7920)
Automatic REQUEST SENSE command failed.
0A, RESERVED.
Partition Map Block Count
Searching for SCSI drives.
Power Macintosh 6100/66
Macintosh PowerBook
A3, RESERVED.
Centris 610/PPC Upgrade
B1, Unimplemented Medium.
Power Macintosh 9500
Menu ID: 133
ProcID: 0
Enabled flags: 0xFE016FF7
Title: 'Utilities'
Items: (zero-terminated list)
0:
Name: 'Copy a Folder or File...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: 'Create Directory Listing...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Copy Partition to Partition...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Copy Devices...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: 'Backup Partition to Files...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Backup Device to Files...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Restore Partition From Files...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: 'Restore Device from Files...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: 'Configure Volume Startup Info...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: 'Set Startup Delay...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
12:
Name: 'Compare Partitions...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
13:
Name: 'Compare Block Range...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
14:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
15:
Name: 'View or Change Partitions...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00 ANSI Version
Removable Media
Macintosh
95, RESERVED.
A1, RESERVED.
PowerBook 180c
Menu ID: 131
ProcID: 0
Enabled flags: 0xFFFB5BFB
Title: 'Setup'
Items: (zero-terminated list)
0:
Name: 'Auto Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Format...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Partition...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Install...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: 'Mount...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Unmount'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Volumes...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: 'Test...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: 'Search for LUNs'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: 'Display LUNs...'
Icon number: 0
Key equivalent: 'L' (0x4C)
Mark character: 0x0
Style: 0x00
12:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
13:
Name: 'Format Options...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
14:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
15:
Name: 'Setup Mirroring…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
16:
Name: 'Reconfigure Mirroring…'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
17:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
18:
Name: 'Special Menu...'
Icon number: 0
Key equivalent: 'M' (0x4D)
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Power Macintosh 8100/80
AF, RESERVED.
Updating driver ... in progress.
Blocks in partition
0C, RESERVED.
scsiDataRunError (-7918)
Data overrun/underrun error.
Prevent/Allow removal of the media failed!
(Finished format stage)
Performance
Transoft
Choice A
This device seems to already have valid partitions! Are you sure you want to DESTROY them by creating new ones?
Your system is abnormal
Apple recommends using Apple HD SC Setup, that comes with A/UX 3.0x, in order to setup the device. It is much easier that way, although it can be done with this program if you thoroughly understand A/UX partitioning.
Allocate them to Macintosh HFS partitions.
bytes/sec
Kilobytes
Allocate them to a Apple_Free partition for later use.
Fatal Error! Time Clock unreadable!
Failed to read and write to the SCSI device reliably! Termination, cabling, locked, defective?
Question
SCSI Director Pro
Control Panel
Caution! This feature is under development. Run it Anyway?
Prevent/Allow removal of the media was successful!
scsiUnexpectedBusFree (-7917)
Unexpected bus free phase.
0D, RESERVED.
First physical block of partition
Testing ... in progress.
Power Macintosh 8100/100
Menu ID: 130
ProcID: 0
Enabled flags: 0xFFFFFF01
Title: 'Edit'
Items: (zero-terminated list)
0:
Name: 'Undo'
Icon number: 0
Key equivalent: 'Z' (0x5A)
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Cut'
Icon number: 0
Key equivalent: 'X' (0x58)
Mark character: 0x0
Style: 0x00
3:
Name: 'Copy'
Icon number: 0
Key equivalent: 'C' (0x43)
Mark character: 0x0
Style: 0x00
4:
Name: 'Paste'
Icon number: 0
Key equivalent: 'V' (0x56)
Mark character: 0x0
Style: 0x00
5:
Name: 'Clear'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Show Clipboard'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00AE, RESERVED.
A0, Drive I/F Time Out
PowerBook 520/540
Centris 660 AV
Peripheral Device Type
94, RESERVED.
6B, RESERVED.
Macintosh Classic
71, RESERVED.
Filename:
Replace Program. (Damaged?)
30, RESERVED.
4A, COMMAND FROM THIS INITIATOR ALREADY QUEUED.
3C, RESERVED.
Enter starting block number to copy
Data (not used)
Minimum memory not met.
Use Write And Verify command for writing?
Abort the further setup of devices?
Unmounting was successful!
Interleave Type
Currently unused (pmBootAddr2)
Items: (5 entries)
0:
Bounds: x1=0, y1=0, x2=235, y2=221
Type: 0
Info: ''
1:
Bounds: x1=7, y1=226, x2=102, y2=245
Type: 4
Info: 'Configure...'
2:
Bounds: x1=7, y1=249, x2=129, y2=268
Type: 4
Info: 'Mount Device ...'
3:
Bounds: x1=150, y1=235, x2=221, y2=258
Type: 4
Info: 'OK'
4:
Bounds: x1=144, y1=230, x2=226, y2=262
Type: -128
Info: ''Insufficient free memory to determine volume name.
The volume name is
Entry point of boot code
Items: (5 entries)
0:
Bounds: x1=140, y1=120, x2=200, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=120, x2=120, y2=140
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=200, y2=66
Type: -120
Info: 'Enter Password for volume ''
3:
Bounds: x1=10, y1=80, x2=205, y2=98
Type: 16
Info: ''
4:
Bounds: x1=130, y1=110, x2=214, y2=145
Type: -128
Info: ''Vendor
Items: (10 entries)
0:
Bounds: x1=216, y1=195, x2=296, y2=215
Type: 4
Info: 'Register'
1:
Bounds: x1=120, y1=195, x2=200, y2=215
Type: 4
Info: 'Cancel'
2:
Bounds: x1=22, y1=21, x2=333, y2=55
Type: -120
Info: 'Now would be a good time to send in your registration card located in the disk envelope.'
3:
Bounds: x1=124, y1=71, x2=293, y2=87
Type: 16
Info: ''
4:
Bounds: x1=125, y1=107, x2=292, y2=123
Type: 16
Info: ''
5:
Bounds: x1=125, y1=144, x2=293, y2=160
Type: 16
Info: 'See Registration Card'
6:
Bounds: x1=79, y1=73, x2=119, y2=89
Type: -120
Info: 'Name'
7:
Bounds: x1=56, y1=108, x2=119, y2=124
Type: -120
Info: 'Company'
8:
Bounds: x1=23, y1=144, x2=119, y2=160
Type: -120
Info: 'Serial Number'
9:
Bounds: x1=76, y1=188, x2=108, y2=220
Type: -128
Info: ''Proceed with unmounting of device
This is your last chance to abort. Are you sure you wish to proceed with the complete setup of many devices?
Device ID
Sorry, unable to change ID on that device.
Read_Multiple_Blocks failed.
The source device is to large to copy onto the destination device.
3D, RESERVED.
4B, RESERVED.
Items: (4 entries)
0:
Bounds: x1=9, y1=91, x2=374, y2=137
Type: -120
Info: '^0'
1:
Bounds: x1=91, y1=1, x2=291, y2=76
Type: -64
Info: ' '
2:
Bounds: x1=5, y1=75, x2=377, y2=89
Type: -64
Info: 'L'
3:
Bounds: x1=46, y1=143, x2=337, y2=157
Type: -128
Info: ''31, NO DEFECT MAPS WERE FOUND.
File Size:
Items: (18 entries)
0:
Bounds: x1=206, y1=8, x2=288, y2=20
Type: -120
Info: 'Vendor'
1:
Bounds: x1=206, y1=29, x2=288, y2=41
Type: -120
Info: 'Product'
2:
Bounds: x1=206, y1=48, x2=288, y2=60
Type: -120
Info: 'Firmware'
3:
Bounds: x1=206, y1=68, x2=288, y2=80
Type: -120
Info: 'Sector'
4:
Bounds: x1=291, y1=7, x2=411, y2=23
Type: -128
Info: ''
5:
Bounds: x1=291, y1=27, x2=411, y2=43
Type: -128
Info: ''
6:
Bounds: x1=291, y1=47, x2=411, y2=63
Type: -128
Info: ''
7:
Bounds: x1=315, y1=69, x2=387, y2=85
Type: -128
Info: ''
8:
Bounds: x1=291, y1=67, x2=311, y2=87
Type: -128
Info: ''
9:
Bounds: x1=344, y1=90, x2=364, y2=110
Type: -128
Info: ''
10:
Bounds: x1=391, y1=67, x2=411, y2=87
Type: -128
Info: ''
11:
Bounds: x1=17, y1=16, x2=183, y2=98
Type: -128
Info: ''
12:
Bounds: x1=64, y1=21, x2=136, y2=59
Type: -128
Info: ''
13:
Bounds: x1=68, y1=24, x2=132, y2=56
Type: -64
Info: ' œ'
14:
Bounds: x1=50, y1=61, x2=150, y2=77
Type: -128
Info: ''
15:
Bounds: x1=20, y1=78, x2=180, y2=94
Type: -128
Info: ''
16:
Bounds: x1=2, y1=115, x2=430, y2=121
Type: -128
Info: ''
17:
Bounds: x1=0, y1=124, x2=436, y2=250
Type: -128
Info: ''70, RESERVED.
6A, RESERVED.
Macintosh IIsi
6E, RESERVED.
Macintosh
68, RESERVED.
Centris 650
8A, RESERVED.
Copied (Actual):
58, RESERVED.
3F, RESERVED.
4D, RESERVED.
You are about to configure this to use physical SCSI ID settings (the switch), instead of a software ID setting. Continue?
WARNING: This command is meant for desperate use when trying to 'magically' fix devices that have damaged partitions AND HAVE BEEN PARTITIONED (or Auto-Setup) BY OUR PROGRAM in the past.
Unmounting failed!
Another device already has that ID, should I change the ID anyway?
Driver count
Transoft® SCSI Director™, ©1989-1994 by Transoft Corporation
Mounting of device was successful! If there are brand new partitions, you will be asked to initialize them, if not, they (if any) will show up on the desktop.
Memory load address of boot code
Drive initialization was canceled.
Test was canceled.
Number of bytes in boot code
Mounting of device failed!
Free Space
The ID of the device has been changed, you should reboot now.
1st Driver block start
The source and destination are the same and are removable. Do you wish to eject the device between steps?
WARNING! This will erase all devices! Enter the SCSI ID you DO NOT wish to set up [0-6].
NOTE: It is *VERY* uncommon to use SCSI ID 7 (conflicts with Mac SCSI Bus), and not normally suggested. Continue anyway?
4C, RESERVED.
3E, RESERVED.
59, RESERVED.
Items: (3 entries)
0:
Bounds: x1=151, y1=109, x2=231, y2=129
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=10, x2=267, y2=93
Type: -120
Info: 'This program can’t run on this machine because the System doesn’t support resource decompression. Please use System 6.0.2 or later.'
2:
Bounds: x1=13, y1=18, x2=45, y2=50
Type: -96
Info: ' 'Current File
PowerBook Duo 210
8B, RESERVED.
Macintosh
69, RESERVED.
6F, RESERVED.
Power Macintosh 9150
81, RESERVED.
Menu ID: 1000
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'Bus'
Items: (zero-terminated list)
0:
Name: '0'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 0073, RESERVED.
65, RESERVED.
Macintosh IIci
Ejection of the media failed!
FIRMWARE REVISION LEVEL
Elapsed Time:
scsiTransferTypeInvalid (-7864)
The scsiTransferType is not supported by this SIM.
63, RESERVED.
Fatal Error! Program flaw. Unspecified case from 'Select_Mirroring_Utilities_Technique'!!!
© 1989-95 by Transoft Corporation
42, CONTROL TRACK.
48, INITIATOR DETECTED ERROR.
Automatic partition mounting will be temporarily re-enabled. If operating with a corrupted device hit 'No'.
Test performs a DESTRUCTIVE test that takes a very long time to complete.
Device Type
Sorry, unable to change ID because all volumes for that device could not be unmounted.
Enter starting block to clear [0-
Special Menu
, ID
Installing the partitions.
Current unused (pmBootEntry2)
Checksum of boot code
Partitioning successfully completed.
Block #
Macintosh HD
The partitions are a little bit messed up. Do you want specific problem details before viewing or editing?
Block Count
Sorry, currently not supported on this device...
The set up of many devices has completed.
49, INAPPROPRIATE/ILLEGAL MESSAGE.
Transoft SCSI Director‚Ñ¢ 4.0
43, MESSAGE REJECT ERROR.
Analysis of Mirroring is completed.
62, RESERVED.
scsiCDBLengthInvalid (-7863)
The CDB length supplied is not supported by this SIM; typically this means it was too big.
Data Throughput:
Expected resource is an invalid size!
PRODUCT IDENTIFICATION
64, RESERVED.
Power Macintosh 8100/120
72, RESERVED.
Menu ID: 1001
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'ID'
Items: (zero-terminated list)
0:
Name: '0'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '1'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: '2'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: '3'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: '4'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: '5'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: '6'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Power Macintosh 8100/110
80, RESERVED.
Menu ID: 1003
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'Bus'
Items: (zero-terminated list)
0:
Name: 'Internal SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00scsiCommandTimeout (-7925)
The timeout value for this parameter block was exceeded and the parameter block was aborted.
Macintosh
Partition Map on selected device could not be read (I/O error )! Programming error, or repair may be needed.
66, RESERVED.
74, RESERVED.
Items Selected:
Inquiry of ID:
NewPtr call failed!
47, PARITY ERROR.
08, BLANK CHECK
41, DRIVE PATH.
All Rights Reserved Worldwide
3B, RESERVED.
Enter new SCSI ID for the device (8 = Use Switch)
Block Signature
Automatic partition mounting will be temporarily re-enabled. If restoring a corrupted device hit 'No'.
Are you sure you wish to proceed with the device copying?
Inquiry
Title: First Block: Size: Partition Num:
Partition Name: Partition Type:
Mounting disk...
Initializing device
Partition Entry #
Processor type
Mounting device
Items: (2 entries)
0:
Bounds: x1=42, y1=8, x2=410, y2=56
Type: -120
Info: '^0'
1:
Bounds: x1=1, y1=8, x2=33, y2=40
Type: -96
Info: ''Driver update was canceled.
Items: (16 entries)
0:
Bounds: x1=420, y1=267, x2=480, y2=287
Type: 4
Info: 'OK'
1:
Bounds: x1=346, y1=267, x2=406, y2=287
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=37, y1=36, x2=491, y2=52
Type: -128
Info: ''
4:
Bounds: x1=11, y1=63, x2=479, y2=79
Type: 6
Info: '1: Forcibly replace the active SCSI driver.'
5:
Bounds: x1=11, y1=112, x2=480, y2=128
Type: 6
Info: '2: Ignore Warning, the previous driver is known to be compatible. '
6:
Bounds: x1=11, y1=160, x2=480, y2=176
Type: 6
Info: '3: Cancel this action, but neutralize the old SCSI driver and Restart'
7:
Bounds: x1=28, y1=208, x2=480, y2=225
Type: 8
Info: '4: Cancel this action, and do nothing at all. (Cancel button)'
8:
Bounds: x1=43, y1=259, x2=75, y2=291
Type: -128
Info: ''
9:
Bounds: x1=0, y1=50, x2=491, y2=61
Type: -64
Info: 'L'
10:
Bounds: x1=1, y1=251, x2=491, y2=263
Type: -64
Info: 'L'
11:
Bounds: x1=37, y1=2, x2=428, y2=34
Type: -120
Info: 'Warning: You have a SCSI Driver already in use for this device. There is no perfect solution. Choose one.'
12:
Bounds: x1=30, y1=81, x2=481, y2=107
Type: -128
Info: ''
13:
Bounds: x1=30, y1=130, x2=481, y2=155
Type: -128
Info: ''
14:
Bounds: x1=30, y1=178, x2=481, y2=203
Type: -128
Info: ''
15:
Bounds: x1=29, y1=226, x2=482, y2=250
Type: -128
Info: ''Items: (24 entries)
0:
Bounds: x1=3, y1=1, x2=398, y2=27
Type: -128
Info: ''
1:
Bounds: x1=4, y1=43, x2=140, y2=138
Type: -128
Info: ''
2:
Bounds: x1=38, y1=35, x2=108, y2=50
Type: -120
Info: 'Seek (ms)'
3:
Bounds: x1=13, y1=50, x2=65, y2=59
Type: -120
Info: 'Sequential'
4:
Bounds: x1=81, y1=50, x2=128, y2=59
Type: -120
Info: 'Butterfly'
5:
Bounds: x1=20, y1=81, x2=62, y2=90
Type: -120
Info: 'Pattern'
6:
Bounds: x1=71, y1=82, x2=135, y2=91
Type: -120
Info: 'Outer to Inner'
7:
Bounds: x1=9, y1=63, x2=62, y2=79
Type: -128
Info: ''
8:
Bounds: x1=75, y1=63, x2=128, y2=79
Type: -128
Info: ''
9:
Bounds: x1=9, y1=95, x2=62, y2=111
Type: -128
Info: ''
10:
Bounds: x1=75, y1=95, x2=128, y2=111
Type: -128
Info: ''
11:
Bounds: x1=4, y1=233, x2=140, y2=286
Type: -128
Info: ''
12:
Bounds: x1=10, y1=226, x2=73, y2=243
Type: -120
Info: 'Progress'
13:
Bounds: x1=7, y1=254, x2=136, y2=264
Type: -128
Info: ''
14:
Bounds: x1=7, y1=266, x2=136, y2=284
Type: -128
Info: ''
15:
Bounds: x1=16, y1=118, x2=122, y2=131
Type: -128
Info: ''
16:
Bounds: x1=5, y1=154, x2=140, y2=220
Type: -128
Info: ''
17:
Bounds: x1=152, y1=43, x2=396, y2=286
Type: -128
Info: ''
18:
Bounds: x1=228, y1=35, x2=318, y2=50
Type: -120
Info: 'Performance'
19:
Bounds: x1=154, y1=59, x2=192, y2=247
Type: -128
Info: ''
20:
Bounds: x1=194, y1=248, x2=392, y2=284
Type: -128
Info: ''
21:
Bounds: x1=194, y1=59, x2=392, y2=247
Type: -128
Info: ''
22:
Bounds: x1=10, y1=146, x2=133, y2=162
Type: -120
Info: 'Throughput Stats'
23:
Bounds: x1=110, y1=236, x2=135, y2=251
Type: -120
Info: 'Stop'Select Partitioning Scheme.
Items: (7 entries)
0:
Bounds: x1=160, y1=120, x2=240, y2=144
Type: 4
Info: 'Continue'
1:
Bounds: x1=72, y1=120, x2=152, y2=144
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=40, x2=232, y2=112
Type: -120
Info: 'This command will do a SCSI level block copy between device(s). You specify the block range and device(s) through dialogs.'
3:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
4:
Bounds: x1=0, y1=32, x2=240, y2=40
Type: -64
Info: 'L'
5:
Bounds: x1=80, y1=8, x2=200, y2=24
Type: -120
Info: 'SCSI Block Copier'
6:
Bounds: x1=0, y1=112, x2=240, y2=120
Type: -64
Info: 'L'Mode Sense
This version of the program does not support that feature for the selected device.
Use the 'Partition' command to partition this device, in some manner, before using this View/Edit Partition command.
The device is already set to that ID!
Block Size
3A, NO MEDIUM PRESENT.
40, RAM FAILURE.
09, VENDOR UNIQUE
Items: (14 entries)
0:
Bounds: x1=264, y1=176, x2=324, y2=196
Type: 4
Info: 'OK'
1:
Bounds: x1=184, y1=176, x2=244, y2=196
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=33, y2=33
Type: -96
Info: ''
3:
Bounds: x1=80, y1=8, x2=272, y2=24
Type: -120
Info: 'SCSI Device Archive Facility'
4:
Bounds: x1=0, y1=32, x2=328, y2=41
Type: -64
Info: 'L'
5:
Bounds: x1=8, y1=48, x2=248, y2=64
Type: -120
Info: ''
6:
Bounds: x1=256, y1=48, x2=320, y2=64
Type: 16
Info: ''
7:
Bounds: x1=8, y1=72, x2=328, y2=112
Type: -120
Info: ''
8:
Bounds: x1=8, y1=120, x2=88, y2=136
Type: -120
Info: 'Start Block'
9:
Bounds: x1=104, y1=120, x2=176, y2=136
Type: -120
Info: 'Last Block'
10:
Bounds: x1=192, y1=120, x2=328, y2=136
Type: -120
Info: 'Starting Segment #'
11:
Bounds: x1=8, y1=144, x2=88, y2=160
Type: 16
Info: ''
12:
Bounds: x1=96, y1=144, x2=176, y2=160
Type: 16
Info: ''
13:
Bounds: x1=208, y1=144, x2=288, y2=160
Type: 16
Info: ''46, SOFT RESET FAILED.
Write_Multiple_Blocks failed.
Overview
75, RESERVED.
Macintosh IIfx
67, RESERVED.
Select the starting block on the first device compare to:
scsiSelectTimeout (-7926)
Target selection timeout.
Menu ID: 1002
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'LUN'
Items: (zero-terminated list)
0:
Name: '0'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '1'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: '2'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: '3'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: '4'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: '5'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: '6'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00 
