Put the bad block number in here.
Items: (16 entries)
0:
Bounds: x1=164, y1=189, x2=222, y2=209
Type: 4
Info: 'Exit'
1:
Bounds: x1=130, y1=20, x2=278, y2=37
Type: -120
Info: 'Current Environment:'
2:
Bounds: x1=15, y1=55, x2=180, y2=71
Type: -120
Info: 'Machine:'
3:
Bounds: x1=210, y1=55, x2=380, y2=71
Type: -120
Info: ''
4:
Bounds: x1=15, y1=75, x2=180, y2=91
Type: -120
Info: 'System:'
5:
Bounds: x1=210, y1=75, x2=380, y2=91
Type: -120
Info: ''
6:
Bounds: x1=15, y1=95, x2=180, y2=111
Type: -120
Info: 'Total Physical Memory:'
7:
Bounds: x1=210, y1=95, x2=380, y2=111
Type: -120
Info: ''
8:
Bounds: x1=15, y1=115, x2=180, y2=131
Type: -120
Info: 'Processor Type:'
9:
Bounds: x1=210, y1=115, x2=380, y2=131
Type: -120
Info: ''
10:
Bounds: x1=15, y1=135, x2=180, y2=151
Type: -120
Info: 'Floating Point Unit:'
11:
Bounds: x1=210, y1=135, x2=380, y2=151
Type: -120
Info: ''
12:
Bounds: x1=15, y1=155, x2=180, y2=171
Type: -120
Info: 'MMU:'
13:
Bounds: x1=210, y1=155, x2=380, y2=171
Type: -120
Info: ''
14:
Bounds: x1=160, y1=185, x2=226, y2=213
Type: -128
Info: ''
15:
Bounds: x1=60, y1=10, x2=92, y2=42
Type: -96
Info: ' 'Not Enough Room in heap zone
Reassigned Blocks:
Select the drive on which you wish to perform the overnight test.
Nifty pictures.
Sorry, not enough physical memory remaining to safely run this program!
Type the password you would like to use into this box.
Complete this command.
This volume has no password to remove.
No suitable device found at ID "2."
None
Starting Block #
Password
You have uninitialized Mac partitions on this drive! Are you sure you want to exit now?
No Error
Items: (6 entries)
0:
Bounds: x1=119, y1=74, x2=179, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=66, y1=43, x2=272, y2=59
Type: 16
Info: ''
2:
Bounds: x1=63, y1=14, x2=257, y2=31
Type: -120
Info: 'Please name this volume:'
3:
Bounds: x1=16, y1=14, x2=48, y2=46
Type: 32
Info: ' '
4:
Bounds: x1=115, y1=70, x2=183, y2=98
Type: -128
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' t'Bad SCSI Command: Communications Error.
Drive is Parked. Turn its power off. Click OK to shut down your Macintosh.
Caution!! Do not forget your password. Be aware that the password is case-sensitive.
Verify Complete
Mac II AMU
Click here to select the SCSI device at SCSI ID "2."
Begin the test.
Add password protection to the selected volume.
The device driver for this drive was not installed at startup and has just now been opened. Click in the volume list again if the volume you wish to access did not mount.
Test the drive's ability to store and retrieve information.
Current picture and total number of pictures.
Error(s) Found!
I/O Error
Items: (10 entries)
0:
Bounds: x1=160, y1=243, x2=231, y2=266
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=137, x2=206, y2=156
Type: -120
Info: 'Lido 7 Version 7.56'
2:
Bounds: x1=38, y1=167, x2=352, y2=218
Type: -120
Info: 'The High Performance Disk Management Utility
for the Apple Macintosh
Copyright ©1992~94, Surf City Software'
3:
Bounds: x1=586, y1=222, x2=713, y2=237
Type: -120
Info: 'Copyright ©1992, Surf City Software'
4:
Bounds: x1=9, y1=6, x2=381, y2=228
Type: -128
Info: ''
5:
Bounds: x1=28, y1=26, x2=256, y2=112
Type: -64
Info: 'Ë'
6:
Bounds: x1=17, y1=130, x2=49, y2=162
Type: 32
Info: ' Ä'
7:
Bounds: x1=156, y1=239, x2=235, y2=270
Type: -128
Info: ''
8:
Bounds: x1=290, y1=50, x2=362, y2=88
Type: -64
Info: '<'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' e'Complete this command.
Leave this dialog.
Items: (10 entries)
0:
Bounds: x1=160, y1=243, x2=231, y2=266
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=137, x2=212, y2=155
Type: -120
Info: 'Lido 7 Version 7.56'
2:
Bounds: x1=38, y1=167, x2=352, y2=218
Type: -120
Info: 'The High Performance Disk Management Utility
for the Apple Macintosh
Copyright ©1992~94, Surf City Software'
3:
Bounds: x1=586, y1=222, x2=713, y2=237
Type: -120
Info: 'Copyright ©1992, Surf City Software'
4:
Bounds: x1=9, y1=6, x2=381, y2=228
Type: -128
Info: ''
5:
Bounds: x1=17, y1=33, x2=245, y2=119
Type: -64
Info: 'Ë'
6:
Bounds: x1=17, y1=130, x2=49, y2=162
Type: 32
Info: ' Ä'
7:
Bounds: x1=156, y1=239, x2=235, y2=270
Type: -128
Info: ''
8:
Bounds: x1=255, y1=19, x2=368, y2=134
Type: -64
Info: ' Ä'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' e'Bad master directory block
Select the drive which you wish to change how data is written.
Sorry, Password Incorrect!
Leave the help dialog.
Checks the drive's ability to retrieve information.
Remove password protection from the selected volume.
Don't complete this command.
The size of this volume cannot be less than this value.
Click here to select the SCSI device at SCSI ID "1."
Kilobytes
Error(s) Found!
Please enter old password for:
Approximate progress of test.
Warning! If you have unsaved documents from other open applications you will lose your changes. Proceed anyway?
Testing the SCSI Write and Verify Command…
Items: (22 entries)
0:
Bounds: x1=390, y1=190, x2=455, y2=210
Type: 4
Info: 'Done'
1:
Bounds: x1=290, y1=50, x2=445, y2=178
Type: 0
Info: ''
2:
Bounds: x1=10, y1=40, x2=187, y2=55
Type: -120
Info: 'First Block Of Vol Bit Map:'
3:
Bounds: x1=10, y1=80, x2=165, y2=95
Type: -120
Info: '# of Allocation Blocks:'
4:
Bounds: x1=10, y1=100, x2=160, y2=115
Type: -120
Info: 'Allocation Block Size:'
5:
Bounds: x1=10, y1=60, x2=166, y2=75
Type: -120
Info: 'First Block In Bit Map:'
6:
Bounds: x1=10, y1=180, x2=160, y2=195
Type: -120
Info: '# of Files on Volume:'
7:
Bounds: x1=10, y1=120, x2=198, y2=135
Type: -120
Info: '# of Free Allocation Blocks:'
8:
Bounds: x1=70, y1=10, x2=216, y2=26
Type: -120
Info: 'Volume Information:'
9:
Bounds: x1=60, y1=150, x2=183, y2=167
Type: -120
Info: 'File Information:'
10:
Bounds: x1=10, y1=200, x2=175, y2=215
Type: -120
Info: '# of Folders on Volume:'
11:
Bounds: x1=210, y1=40, x2=280, y2=55
Type: -120
Info: ''
12:
Bounds: x1=210, y1=60, x2=280, y2=75
Type: -120
Info: ''
13:
Bounds: x1=210, y1=80, x2=280, y2=95
Type: -120
Info: ''
14:
Bounds: x1=210, y1=100, x2=280, y2=115
Type: -120
Info: ''
15:
Bounds: x1=210, y1=120, x2=280, y2=135
Type: -120
Info: ''
16:
Bounds: x1=210, y1=180, x2=280, y2=195
Type: -120
Info: ''
17:
Bounds: x1=210, y1=200, x2=280, y2=215
Type: -120
Info: ''
18:
Bounds: x1=300, y1=10, x2=455, y2=44
Type: -120
Info: 'Click on a Volume to get its information.'
19:
Bounds: x1=290, y1=190, x2=365, y2=210
Type: 4
Info: 'Show Map'
20:
Bounds: x1=386, y1=186, x2=459, y2=214
Type: -128
Info: ''
21:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' L'Bad SCSI Command: Bad Parameter or TIB opcode.
Bad SCSI Command: Arbitration Failure.
Items: (7 entries)
0:
Bounds: x1=330, y1=220, x2=420, y2=240
Type: 4
Info: 'Exit'
1:
Bounds: x1=10, y1=10, x2=266, y2=266
Type: 0
Info: ''
2:
Bounds: x1=275, y1=45, x2=479, y2=160
Type: -120
Info: 'Black/Blue areas represent allocation blocks which are currently being used. White areas represent unused allocation blocks. Any gray area represents unused space in the Volume's Bit Map.'
3:
Bounds: x1=310, y1=20, x2=444, y2=35
Type: -120
Info: 'VOLUME USAGE MAP'
4:
Bounds: x1=326, y1=216, x2=424, y2=244
Type: -128
Info: ''
5:
Bounds: x1=280, y1=180, x2=430, y2=196
Type: -120
Info: 'Magnification factor:'
6:
Bounds: x1=435, y1=180, x2=470, y2=196
Type: -120
Info: ''Testing the SCSI Verify with Byte Check Command…
Caution! You presently have no MacOS volumes created on this drive. Do you still wish to exit?
Stop test if in progress, otherwise leave dialog.
Please enter new password for:
No Errors Found!
Built-in
Click on one of these options to select it.
No suitable device found at ID "1."
Sorry, something unexpected happened during the zone paritioning process! Please choose another partition method.
Leave this dialog.
This volume does not yet have a password.
Control the picture display by clicking here.
Select the drive on which you would like to perform the verify test.
Volume is Already Mounted!
External file system; file-system identifier is non-zero or path reference number is greater than 1024.
Update status info.
Leave this dialog.
Specified drive does not match any in the drive queue.
Select the drive for which you wish to change the cache size.
Sorry, the password you entered is incorrect. Please try again.
Complete this command.
Select the drive on which you wish to perform the seek test.
Don't complete this command.
Items: (25 entries)
0:
Bounds: x1=345, y1=75, x2=425, y2=95
Type: 4
Info: 'Scan Bus'
1:
Bounds: x1=55, y1=250, x2=325, y2=282
Type: 0
Info: ''
2:
Bounds: x1=55, y1=215, x2=325, y2=247
Type: 0
Info: ''
3:
Bounds: x1=55, y1=180, x2=325, y2=212
Type: 0
Info: ''
4:
Bounds: x1=55, y1=145, x2=325, y2=177
Type: 0
Info: ''
5:
Bounds: x1=55, y1=110, x2=325, y2=142
Type: 0
Info: ''
6:
Bounds: x1=55, y1=75, x2=325, y2=107
Type: 0
Info: ''
7:
Bounds: x1=55, y1=40, x2=325, y2=72
Type: 0
Info: ''
8:
Bounds: x1=55, y1=5, x2=325, y2=37
Type: 0
Info: ''
9:
Bounds: x1=10, y1=250, x2=42, y2=282
Type: 32
Info: ' »'
10:
Bounds: x1=10, y1=215, x2=42, y2=247
Type: 32
Info: ' …'
11:
Bounds: x1=10, y1=180, x2=42, y2=212
Type: 32
Info: ' '
12:
Bounds: x1=10, y1=145, x2=42, y2=177
Type: 32
Info: ' À'
13:
Bounds: x1=10, y1=110, x2=42, y2=142
Type: 32
Info: ' Ã'
14:
Bounds: x1=10, y1=75, x2=42, y2=107
Type: 32
Info: ' Õ'
15:
Bounds: x1=10, y1=40, x2=42, y2=72
Type: 32
Info: ' Œ'
16:
Bounds: x1=10, y1=5, x2=42, y2=37
Type: 32
Info: ' œ'
17:
Bounds: x1=1345, y1=90, x2=1425, y2=110
Type: 4
Info: 'Help'
18:
Bounds: x1=345, y1=99, x2=425, y2=119
Type: 4
Info: 'Bus Status'
19:
Bounds: x1=345, y1=145, x2=425, y2=165
Type: 4
Info: 'Easy Setup'
20:
Bounds: x1=345, y1=169, x2=425, y2=189
Type: 4
Info: 'Format'
21:
Bounds: x1=345, y1=216, x2=425, y2=236
Type: 4
Info: 'Update'
22:
Bounds: x1=345, y1=240, x2=425, y2=260
Type: 4
Info: 'Mount'
23:
Bounds: x1=349, y1=6, x2=421, y2=44
Type: 64
Info: '<'
24:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ù'
You should not be moving the mouse during the test!!!
Enter the value of your choosing here.
has completed the Verify Blocks test!
Your request will require partitions AND their data to be moved. This may be time-consuming and will result in data loss if interrupted. Continue anyway?
Items: (16 entries)
0:
Bounds: x1=39, y1=204, x2=106, y2=224
Type: 4
Info: 'Start'
1:
Bounds: x1=160, y1=205, x2=229, y2=226
Type: 4
Info: 'Exit'
2:
Bounds: x1=70, y1=40, x2=234, y2=130
Type: -128
Info: ''
3:
Bounds: x1=290, y1=145, x2=427, y2=163
Type: -120
Info: 'Read Transfer Rate:'
4:
Bounds: x1=300, y1=165, x2=420, y2=180
Type: 8
Info: ''
5:
Bounds: x1=275, y1=35, x2=433, y2=131
Type: -128
Info: ''
6:
Bounds: x1=290, y1=190, x2=428, y2=207
Type: -120
Info: 'Write Transfer Rate:'
7:
Bounds: x1=300, y1=210, x2=420, y2=225
Type: 8
Info: ''
8:
Bounds: x1=90, y1=10, x2=174, y2=25
Type: 8
Info: ' Driver Test'
9:
Bounds: x1=170, y1=160, x2=205, y2=175
Type: 16
Info: '256'
10:
Bounds: x1=55, y1=150, x2=149, y2=184
Type: 8
Info: 'Transfer Size: (10 ≤ x ≤ 256)'
11:
Bounds: x1=35, y1=200, x2=110, y2=228
Type: -128
Info: ''
12:
Bounds: x1=30, y1=40, x2=62, y2=72
Type: -96
Info: ' '
13:
Bounds: x1=20, y1=30, x2=250, y2=140
Type: -128
Info: ''
14:
Bounds: x1=295, y1=10, x2=420, y2=26
Type: -120
Info: 'Select a Volume:'
15:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' æ'Passworded
Bad SCSI Command: MgrBusyErr.
Sorry, physical memory too fragmented to access SCSI Board! Try quitting another program or disabling virtual memory.
Volume(s):
Bad SCSI Command: SequenceErr.
Sequential-Access Device (Tape)
Not Passworded
Your changes to your volume icons will only be visible under System Software v.7.0 or later. Do you still wish to proceed?
Items: (15 entries)
0:
Bounds: x1=70, y1=260, x2=137, y2=280
Type: 4
Info: 'Start'
1:
Bounds: x1=230, y1=260, x2=299, y2=281
Type: 4
Info: 'Exit'
2:
Bounds: x1=30, y1=20, x2=335, y2=105
Type: -120
Info: 'This test will take from 30 seconds to a few minutes and will use direct SCSI calls. Data transfer rate is measured in Kilobytes per Second. Elapsed time is critical so while test is in progress do not touch anything!!'
3:
Bounds: x1=30, y1=200, x2=167, y2=218
Type: -120
Info: 'Read Transfer Rate:'
4:
Bounds: x1=210, y1=200, x2=330, y2=215
Type: 8
Info: ''
5:
Bounds: x1=20, y1=10, x2=350, y2=115
Type: -128
Info: ''
6:
Bounds: x1=30, y1=230, x2=168, y2=247
Type: -120
Info: 'Write Transfer Rate:'
7:
Bounds: x1=210, y1=230, x2=330, y2=245
Type: 8
Info: ''
8:
Bounds: x1=50, y1=120, x2=155, y2=155
Type: 5
Info: 'Allow Read
disconnect'
9:
Bounds: x1=210, y1=120, x2=310, y2=157
Type: 5
Info: 'Allow Write
Disconnect'
10:
Bounds: x1=130, y1=2, x2=242, y2=17
Type: -120
Info: ' Direct SCSI Test'
11:
Bounds: x1=260, y1=165, x2=295, y2=180
Type: 16
Info: '256'
12:
Bounds: x1=30, y1=165, x2=235, y2=183
Type: 8
Info: 'Transfer Size: (10 ≤ x ≤ 256)'
13:
Bounds: x1=66, y1=256, x2=141, y2=284
Type: -128
Info: ''
14:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ø'The size of this volume cannot be more than this value.
Leave this dialog
Click here to protect this volume from writes.
Gives an approximate measurement of how fast your drive can get to your data.
Creative Title.
Leave this dialog.
Set the size of the read cache you want your driver to use.
Sorry, you cannot tell your boot volume not to mount! This is a contradiction.
Volume lacks Macintosh-format directory.
Items: (29 entries)
0:
Bounds: x1=12, y1=263, x2=67, y2=284
Type: 4
Info: 'OK'
1:
Bounds: x1=14, y1=25, x2=190, y2=254
Type: -128
Info: ''
2:
Bounds: x1=34, y1=32, x2=131, y2=48
Type: -120
Info: 'Attention:'
3:
Bounds: x1=35, y1=50, x2=130, y2=66
Type: -120
Info: 'Acknowledge:'
4:
Bounds: x1=35, y1=68, x2=130, y2=84
Type: -120
Info: 'Reset:'
5:
Bounds: x1=35, y1=86, x2=130, y2=102
Type: -120
Info: 'Busy:'
6:
Bounds: x1=35, y1=104, x2=130, y2=120
Type: -120
Info: 'Request:'
7:
Bounds: x1=35, y1=122, x2=130, y2=138
Type: -120
Info: 'Message:'
8:
Bounds: x1=35, y1=140, x2=130, y2=156
Type: -120
Info: 'Control/Data:'
9:
Bounds: x1=35, y1=158, x2=130, y2=174
Type: -120
Info: 'Input/Output:'
10:
Bounds: x1=35, y1=176, x2=130, y2=192
Type: -120
Info: 'Select:'
11:
Bounds: x1=35, y1=194, x2=130, y2=210
Type: -120
Info: 'Data Parity:'
12:
Bounds: x1=29, y1=225, x2=99, y2=241
Type: -120
Info: 'Phase:'
13:
Bounds: x1=84, y1=263, x2=131, y2=284
Type: 4
Info: 'Status'
14:
Bounds: x1=55, y1=5, x2=158, y2=21
Type: -120
Info: 'SCSI BUS STATUS'
15:
Bounds: x1=145, y1=32, x2=170, y2=48
Type: -120
Info: '0'
16:
Bounds: x1=145, y1=50, x2=170, y2=66
Type: -120
Info: '0'
17:
Bounds: x1=145, y1=68, x2=170, y2=84
Type: -120
Info: '0'
18:
Bounds: x1=145, y1=86, x2=170, y2=102
Type: -120
Info: '0'
19:
Bounds: x1=145, y1=104, x2=170, y2=120
Type: -120
Info: '0'
20:
Bounds: x1=145, y1=122, x2=170, y2=138
Type: -120
Info: '0'
21:
Bounds: x1=145, y1=140, x2=170, y2=156
Type: -120
Info: '0'
22:
Bounds: x1=145, y1=158, x2=170, y2=174
Type: -120
Info: '0'
23:
Bounds: x1=145, y1=176, x2=170, y2=192
Type: -120
Info: '0'
24:
Bounds: x1=145, y1=194, x2=170, y2=210
Type: -120
Info: '0'
25:
Bounds: x1=103, y1=225, x2=186, y2=241
Type: -120
Info: ''
26:
Bounds: x1=143, y1=263, x2=190, y2=284
Type: 4
Info: 'Reset'
27:
Bounds: x1=8, y1=259, x2=71, y2=288
Type: 0
Info: ''
28:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' 'You should not be moving the mouse during the test!!!
Issue a SCSI Reset to the bus (Doesn't hurt anything).
Parameters do not specify and existing volume, and there is no default volume.
Items: (10 entries)
0:
Bounds: x1=230, y1=190, x2=290, y2=210
Type: 4
Info: 'OK'
1:
Bounds: x1=340, y1=190, x2=400, y2=210
Type: 4
Info: 'Cancel'
2:
Bounds: x1=270, y1=20, x2=422, y2=86
Type: -120
Info: 'Select partition type and adjust its size as needed.
(1 Megabyte = 1024 K)'
3:
Bounds: x1=20, y1=20, x2=195, y2=212
Type: 0
Info: ''
4:
Bounds: x1=322, y1=100, x2=404, y2=117
Type: 8
Info: ''
5:
Bounds: x1=322, y1=122, x2=393, y2=136
Type: 16
Info: ''
6:
Bounds: x1=322, y1=142, x2=405, y2=158
Type: 8
Info: ''
7:
Bounds: x1=230, y1=100, x2=320, y2=116
Type: -120
Info: 'Minimum (K)'
8:
Bounds: x1=230, y1=141, x2=320, y2=158
Type: -120
Info: 'Maximum (K)'
9:
Bounds: x1=230, y1=20, x2=262, y2=52
Type: -96
Info: ' 'Complete this command.
Measures how fast you can transfer data between this drive and your Macintosh.
Don't complete this command.
Click here to select the SCSI device at SCSI ID "0."
Click on the volume you wish to resize.
"Blind" reads are faster.
reports an error in the "Verify Test." Please make it the active application to examine the error!
Items: (9 entries)
0:
Bounds: x1=60, y1=190, x2=127, y2=210
Type: 4
Info: 'Start'
1:
Bounds: x1=210, y1=190, x2=279, y2=211
Type: 4
Info: 'Exit'
2:
Bounds: x1=30, y1=20, x2=320, y2=122
Type: -120
Info: 'This test will take from 5 to 30 minutes. The average seek time is calculated by simulating 10,000 random seeks. Seek time is measured in milliseconds. Elapsed time is critical so while test is in progress do not touch anything!!'
3:
Bounds: x1=30, y1=150, x2=167, y2=168
Type: -120
Info: 'AVERAGE SEEK TIME:'
4:
Bounds: x1=200, y1=150, x2=298, y2=169
Type: -120
Info: ''
5:
Bounds: x1=20, y1=10, x2=330, y2=127
Type: -128
Info: ''
6:
Bounds: x1=138, y1=4, x2=213, y2=20
Type: -120
Info: ' Seek Test '
7:
Bounds: x1=56, y1=186, x2=131, y2=214
Type: 0
Info: ''
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ω'Are you sure you want to reassign block
Bad SCSI Command: compare error.
Bad SCSI Command: phase error.
Items: (15 entries)
0:
Bounds: x1=70, y1=260, x2=137, y2=280
Type: 4
Info: 'Start'
1:
Bounds: x1=230, y1=260, x2=299, y2=281
Type: 4
Info: 'Exit'
2:
Bounds: x1=30, y1=20, x2=335, y2=105
Type: -120
Info: 'This test will take from 30 seconds to a few minutes and will use direct SCSI calls. Data transfer rate is measured in Kilobytes per Second. Elapsed time is critical so while test is in progress do not touch anything!!'
3:
Bounds: x1=30, y1=200, x2=167, y2=218
Type: -120
Info: 'Read Transfer Rate:'
4:
Bounds: x1=210, y1=200, x2=330, y2=215
Type: 8
Info: ''
5:
Bounds: x1=20, y1=10, x2=350, y2=115
Type: -128
Info: ''
6:
Bounds: x1=30, y1=230, x2=168, y2=247
Type: -120
Info: 'Write Transfer Rate:'
7:
Bounds: x1=210, y1=230, x2=330, y2=245
Type: 8
Info: ''
8:
Bounds: x1=40, y1=130, x2=168, y2=149
Type: 5
Info: 'Use Blind Reads'
9:
Bounds: x1=210, y1=130, x2=338, y2=149
Type: 5
Info: 'Use Blind Writes'
10:
Bounds: x1=130, y1=2, x2=242, y2=17
Type: -120
Info: ' Direct SCSI Test'
11:
Bounds: x1=260, y1=160, x2=295, y2=175
Type: 16
Info: '256'
12:
Bounds: x1=30, y1=160, x2=235, y2=178
Type: 8
Info: 'Transfer Size: (10 ≤ x ≤ 256)'
13:
Bounds: x1=66, y1=256, x2=141, y2=284
Type: -128
Info: ''
14:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' º'This cartridge cannot be used until it is formatted. Would you like to format it now?
Remounting Volume ...
No Errors
You should not be moving the mouse during the test!!!
Change the size of this partition.
No suitable device found at ID "0."
Allows you to control the manner in which data is written to the selected disk.
Enter the Interleave ratio you want the drive to use.
Select the drive on which you wish to perform the direct SCSI Test.
Too many files open
Begin the test.
Create, delete, resize or password Mac partitions on this drive.
Our Platinum II 2" cabinet.
Enter the name of your choice here.
Drive will do normal writes.
Unable to read drive Capacity!
Create a 4MB Mac partition and leave the remainder of the drive free.
The Floptical‚Ñ¢ Icon.
has completed the Overnight Test!
Volume lacks Macintosh-format directory.
A file with the specified name and version number already exists.
Don't complete this command.
Unable to set block size to 512 bytes. The current (default) block size will remain unchanged.
Items: (25 entries)
0:
Bounds: x1=20, y1=60, x2=52, y2=92
Type: 32
Info: '-'
1:
Bounds: x1=80, y1=60, x2=112, y2=92
Type: 32
Info: '.'
2:
Bounds: x1=140, y1=60, x2=172, y2=92
Type: 32
Info: '/'
3:
Bounds: x1=200, y1=60, x2=232, y2=92
Type: 32
Info: '0'
4:
Bounds: x1=260, y1=60, x2=292, y2=92
Type: 32
Info: '1'
5:
Bounds: x1=20, y1=105, x2=52, y2=137
Type: 32
Info: '2'
6:
Bounds: x1=80, y1=105, x2=112, y2=137
Type: 32
Info: '3'
7:
Bounds: x1=140, y1=105, x2=172, y2=137
Type: 32
Info: '4'
8:
Bounds: x1=200, y1=105, x2=232, y2=137
Type: 32
Info: '5'
9:
Bounds: x1=260, y1=105, x2=292, y2=137
Type: 32
Info: '6'
10:
Bounds: x1=20, y1=150, x2=52, y2=182
Type: 32
Info: '7'
11:
Bounds: x1=80, y1=150, x2=112, y2=182
Type: 32
Info: '8'
12:
Bounds: x1=140, y1=150, x2=172, y2=182
Type: 32
Info: '9'
13:
Bounds: x1=200, y1=150, x2=232, y2=182
Type: 32
Info: ':'
14:
Bounds: x1=260, y1=150, x2=292, y2=182
Type: 32
Info: ';'
15:
Bounds: x1=20, y1=195, x2=52, y2=227
Type: 32
Info: '<'
16:
Bounds: x1=80, y1=195, x2=112, y2=227
Type: 32
Info: '='
17:
Bounds: x1=140, y1=195, x2=172, y2=227
Type: 32
Info: '>'
18:
Bounds: x1=200, y1=195, x2=232, y2=227
Type: 32
Info: '?'
19:
Bounds: x1=260, y1=195, x2=292, y2=227
Type: 32
Info: '@'
20:
Bounds: x1=190, y1=240, x2=255, y2=260
Type: 4
Info: 'Cancel'
21:
Bounds: x1=50, y1=240, x2=115, y2=260
Type: 4
Info: 'OK'
22:
Bounds: x1=65, y1=10, x2=288, y2=27
Type: -120
Info: 'Select An Icon For Your Hard Disk.'
23:
Bounds: x1=15, y1=5, x2=300, y2=50
Type: -128
Info: ''
24:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' 'You have not selected the partition type!!
Items: (9 entries)
0:
Bounds: x1=245, y1=202, x2=313, y2=222
Type: 4
Info: 'Cancel'
1:
Bounds: x1=102, y1=202, x2=165, y2=222
Type: 4
Info: 'Ok'
2:
Bounds: x1=242, y1=159, x2=311, y2=172
Type: 16
Info: ''
3:
Bounds: x1=82, y1=157, x2=211, y2=174
Type: -120
Info: 'Reassign block # :'
4:
Bounds: x1=20, y1=15, x2=375, y2=95
Type: -120
Info: 'Enter bad block numbers below that have been returned by the verify test. This option is provided as a temporary solution for bad blocks. Remember, reformatting the drive is the recommended way to ‘spare out’ bad blocks.'
5:
Bounds: x1=20, y1=96, x2=375, y2=148
Type: -120
Info: 'Be aware that the new block will be blank and thus leave a hole in the file, program, etc. which owned the bad block!'
6:
Bounds: x1=12, y1=8, x2=386, y2=186
Type: -128
Info: ''
7:
Bounds: x1=241, y1=198, x2=317, y2=226
Type: -128
Info: ''
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' y'Items: (8 entries)
0:
Bounds: x1=62, y1=9, x2=290, y2=95
Type: -64
Info: 'Ë'
1:
Bounds: x1=1246, y1=26, x2=1394, y2=90
Type: -120
Info: '1095 N. Main St M-1
Orange, CA 92667
714/289-8543
714/289-8543 (Fax)'
2:
Bounds: x1=98, y1=150, x2=303, y2=166
Type: -120
Info: ''
3:
Bounds: x1=98, y1=170, x2=303, y2=186
Type: -120
Info: ''
4:
Bounds: x1=18, y1=96, x2=334, y2=112
Type: -120
Info: 'Lido 7 - Copyright1992~94, Surf City Software'
5:
Bounds: x1=98, y1=130, x2=247, y2=146
Type: -120
Info: 'This copy belongs to:'
6:
Bounds: x1=34, y1=120, x2=319, y2=195
Type: -128
Info: ''
7:
Bounds: x1=48, y1=130, x2=80, y2=162
Type: -96
Info: ' 'Leave this dialog.
More information about this program.
Partition entry invalid. Please reformat this drive.
Sorry, you must remove write protection before you can modifiy the partition map.
Menu ID: 128
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: ''
Items: (zero-terminated list)
Note: template did not parse all data in resource; remaining data: 00
Examine the status of your Mac's SCSI chip registers.
Allows this test to use faster (blind) reads.
Type the password for this volume in here.
ProDOS (Apple II)
Unknown SCSI Device
SCSI Board Firmware Level:
iomega JAZ Drive
No Cartridge installed
Unreserved 4
This option is considered dangerous by the utility.
The name of the volume you wish to mount.
More detailed information about the features of this utility.
Please note: You have just chosen not to mount your boot volume! Please make sure the volume on the drive you intend to boot from is set to mount at startup.
Items: (3 entries)
0:
Bounds: x1=215, y1=93, x2=275, y2=113
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=7, x2=337, y2=86
Type: 8
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ‰'Menu ID: 129
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'File'
Items: (zero-terminated list)
0:
Name: 'Quit'
Icon number: 0
Key equivalent: 'Q' (0x51)
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Items: (8 entries)
0:
Bounds: x1=200, y1=140, x2=270, y2=160
Type: 4
Info: 'Cancel'
1:
Bounds: x1=50, y1=140, x2=120, y2=160
Type: 7
Info: ' '
2:
Bounds: x1=69, y1=93, x2=266, y2=110
Type: 16
Info: ''
3:
Bounds: x1=65, y1=14, x2=283, y2=38
Type: 8
Info: ''
4:
Bounds: x1=17, y1=13, x2=49, y2=45
Type: 32
Info: ' '
5:
Bounds: x1=195, y1=136, x2=275, y2=164
Type: -128
Info: ''
6:
Bounds: x1=65, y1=49, x2=278, y2=72
Type: 8
Info: ''
7:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' 'You must unlock your cartridge before you can format.
You must unlock this cartridge before you can reassign a block.
Remove a bad block from service.
You should not be moving the mouse during the test!!!
Sorry, could not locate driver for this drive!
Sorry, your drive does not appear to support Zone Bit Recording, or is not compatible with Zone Partitioning. Please select a different partition method.
Complete this command.
Logical end-of-file reached during read operation.
Specified drive does not match any in the drive queue.
reports an error in the "Overnight Test." Please make it the active application to examine the error!
Create a 4MB Mac partition and allocate the remainder to A/UX user partition.
Driver Discriptor Map is not valid. Please reformat this drive.
Complete this command.
I'm satisfied with the name.
Drive will write and verify data in a single transfer.
Our Platinum II 3" cabinet.
You must select a drive before you can customize its partitions.
Choose between three levels of write verification.
Disconnecting may speed transfer rates.
Our Platinum II Removable cabinet.
A Zero Foot cabinet.
Mounting Failed! Driver not installed!
Too many files open
MESSAGE OUT
Data Transfer Err =
Overnight Testing Failed!
Don't I look good in color?
You must select a transfer size between 10 and 256 kbytes!
Menu ID: 134
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'SCSI Buses'
Items: (zero-terminated list)
0:
Name: ' Built In SCSI Bus'
Icon number: -102
Key equivalent: 0x0
Mark character: 0x12
Style: 0x00
1:
Name: ' Slot 0 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: ' Slot 1 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: ' Slot 2 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: ' Slot 3 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: ' Slot 4 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: ' Slot 5 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: ' Slot 6 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: ' Slot 7 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: ' Slot 8 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: ' Slot 9 SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: ' Slot A SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
12:
Name: ' Slot B SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
13:
Name: ' Slot C SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
14:
Name: ' Slot D SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
15:
Name: ' Slot E SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
16:
Name: ' Slot F SCSI Bus'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Items: (9 entries)
0:
Bounds: x1=123, y1=178, x2=181, y2=198
Type: 4
Info: 'OK'
1:
Bounds: x1=25, y1=15, x2=57, y2=47
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=15, x2=278, y2=50
Type: -120
Info: 'Please personalize your copy of Lido 7...'
3:
Bounds: x1=30, y1=70, x2=195, y2=86
Type: -120
Info: 'Enter your name below:'
4:
Bounds: x1=30, y1=95, x2=250, y2=111
Type: 16
Info: 'Your name here'
5:
Bounds: x1=30, y1=120, x2=260, y2=136
Type: -120
Info: 'Enter your company name below:'
6:
Bounds: x1=30, y1=145, x2=250, y2=161
Type: 16
Info: 'Your company name here'
7:
Bounds: x1=119, y1=174, x2=185, y2=202
Type: -128
Info: ''
8:
Bounds: x1=15, y1=5, x2=288, y2=60
Type: -128
Info: ''Tells you information about files and folders on the volumes on this drive.
An Error Occured while enabling Error Recovery
You should not be moving the mouse during the test!!!
Items: (10 entries)
0:
Bounds: x1=149, y1=202, x2=209, y2=222
Type: 4
Info: 'Cancel'
1:
Bounds: x1=35, y1=202, x2=95, y2=222
Type: 4
Info: 'OK'
2:
Bounds: x1=38, y1=38, x2=205, y2=58
Type: 6
Info: 'Create new Password'
3:
Bounds: x1=38, y1=67, x2=182, y2=87
Type: 6
Info: 'Change Password'
4:
Bounds: x1=37, y1=97, x2=172, y2=118
Type: 6
Info: 'Delete Password'
5:
Bounds: x1=41, y1=137, x2=206, y2=154
Type: -120
Info: 'This volume is currently:'
6:
Bounds: x1=65, y1=164, x2=179, y2=180
Type: -120
Info: ''
7:
Bounds: x1=14, y1=28, x2=225, y2=130
Type: -128
Info: ''
8:
Bounds: x1=58, y1=6, x2=186, y2=23
Type: -120
Info: 'PASSWORD OPTIONS'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' »'Click here if you don't want to mount this volume anymore.
Unreserved 3
Enter here the number of blocks you wish this test to use during testing.
Items: (6 entries)
0:
Bounds: x1=200, y1=95, x2=300, y2=115
Type: 4
Info: 'Initialize…'
1:
Bounds: x1=30, y1=95, x2=120, y2=115
Type: 4
Info: 'Custom…'
2:
Bounds: x1=65, y1=15, x2=317, y2=67
Type: -120
Info: 'Partitioning was successful! Would you like to initialize your Mac volume now or make custom modifications?'
3:
Bounds: x1=15, y1=15, x2=47, y2=47
Type: -96
Info: ' '
4:
Bounds: x1=196, y1=91, x2=304, y2=119
Type: 0
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ê'Request Aux Sense command failed!
Zone Group
MB Drive
Restart
A Bad Block has been found. Would you like to Reassign it now?
iomega ZIP Drive
Apple_HFS
Please note: The volume you have chosen to boot from is set NOT to mount! If you really want to boot from this volume, uncheck the "Don't Mount at Startup" box.
Items: (3 entries)
0:
Bounds: x1=227, y1=93, x2=287, y2=113
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=6, x2=339, y2=85
Type: 8
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' „'Unreserved 2
Continue this operation.
Stops test and gives additional information about the error.
Items: (8 entries)
0:
Bounds: x1=200, y1=165, x2=270, y2=185
Type: 4
Info: 'Cancel'
1:
Bounds: x1=45, y1=165, x2=115, y2=185
Type: 7
Info: ' '
2:
Bounds: x1=41, y1=126, x2=238, y2=143
Type: 16
Info: ''
3:
Bounds: x1=38, y1=66, x2=256, y2=90
Type: 8
Info: ''
4:
Bounds: x1=17, y1=13, x2=49, y2=45
Type: 32
Info: ' '
5:
Bounds: x1=66, y1=7, x2=279, y2=64
Type: -120
Info: ''
6:
Bounds: x1=37, y1=97, x2=261, y2=121
Type: 8
Info: ''
7:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' …'Enter here the number of kbytes to transfer.
An Error Occured while disabling Error Recovery
Select the drive on which you wish to reassign a bad block.
Items: (9 entries)
0:
Bounds: x1=13, y1=13, x2=126, y2=128
Type: -64
Info: ' Ä'
1:
Bounds: x1=1246, y1=7, x2=1394, y2=71
Type: -120
Info: '1095 N. Main St M-1
Orange, CA 92667
714/289-8543
714/289-8543 (Fax)'
2:
Bounds: x1=102, y1=189, x2=307, y2=205
Type: -120
Info: ''
3:
Bounds: x1=102, y1=209, x2=307, y2=225
Type: -120
Info: ''
4:
Bounds: x1=31, y1=132, x2=336, y2=149
Type: -120
Info: 'Lido 7 - Copyright, ©1994, Surf City Software'
5:
Bounds: x1=102, y1=169, x2=251, y2=185
Type: -120
Info: 'This copy belongs to:'
6:
Bounds: x1=41, y1=159, x2=326, y2=234
Type: -128
Info: ''
7:
Bounds: x1=52, y1=169, x2=84, y2=201
Type: -96
Info: ' '
8:
Bounds: x1=125, y1=27, x2=353, y2=113
Type: -64
Info: 'Ë'Sorry, you must reformat your hard disk with this utility before you can get volume info for this drive!
Items: (12 entries)
0:
Bounds: x1=190, y1=170, x2=260, y2=190
Type: 4
Info: 'Cancel'
1:
Bounds: x1=50, y1=170, x2=120, y2=190
Type: 4
Info: 'OK'
2:
Bounds: x1=220, y1=140, x2=240, y2=154
Type: 16
Info: ''
3:
Bounds: x1=70, y1=140, x2=205, y2=155
Type: -120
Info: 'Default Interleave :'
4:
Bounds: x1=21, y1=20, x2=280, y2=105
Type: -120
Info: 'The default interleave factor has been set for you to provide the maximum performance for your machine and hard disk. Change this value only if you know what you are doing!'
5:
Bounds: x1=11, y1=11, x2=291, y2=113
Type: -128
Info: ''
6:
Bounds: x1=98, y1=4, x2=198, y2=19
Type: -120
Info: 'SET INTERLEAVE '
7:
Bounds: x1=30, y1=120, x2=204, y2=136
Type: -120
Info: 'Current Drive Interleave :'
8:
Bounds: x1=220, y1=120, x2=275, y2=137
Type: 8
Info: ' '
9:
Bounds: x1=243, y1=140, x2=270, y2=155
Type: 8
Info: ' : 1'
10:
Bounds: x1=186, y1=166, x2=264, y2=194
Type: -128
Info: ''
11:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' w'Type the password the volume is currently using in here.
No Errors Found
SCSI Complete Err =
Parameters do not specify and existing volume, and there is no default volume.
STATUS
Typical 5" cabinet.
Drive failed to park!
Our Platinum II 5" cabinet.
You must select a drive before you can partition it.
Drive will write data to media. Computer then re-sends data to drive using the Verify command.
I was unable to close the device driver for this drive. Please restart your Mac from the "File" menu when you are finished.
The Standard Macintosh.
Items: (9 entries)
0:
Bounds: x1=225, y1=175, x2=295, y2=195
Type: 4
Info: 'Cancel'
1:
Bounds: x1=80, y1=175, x2=150, y2=195
Type: 4
Info: 'Set Sleep'
2:
Bounds: x1=21, y1=25, x2=339, y2=91
Type: -120
Info: 'You may change the sleep timer on your IOMEGA Jaz Drive. If you remove power from the Jaz drive, this timer will be reset to the factory default of 30 minutes.'
3:
Bounds: x1=80, y1=110, x2=184, y2=126
Type: -120
Info: 'Current Value:'
4:
Bounds: x1=80, y1=135, x2=165, y2=151
Type: -120
Info: 'New Value:'
5:
Bounds: x1=205, y1=110, x2=260, y2=125
Type: -120
Info: ''
6:
Bounds: x1=205, y1=135, x2=260, y2=150
Type: 16
Info: ''
7:
Bounds: x1=10, y1=15, x2=350, y2=100
Type: -128
Info: ''
8:
Bounds: x1=100, y1=8, x2=261, y2=25
Type: -120
Info: 'IOMEGA Jaz Sleep Timer'Select the drive you wish to zone partition.
Get information about all partitions on the currently selected drive.
Leave this dialog.
I/O Error
Pause
Mouse Moved! Test results invalid!
Clicking here will enable error recovery on the selected drive.
Sorry, you must reformat your hard disk with this utility before you can use this feature!
Menu ID: 131
ProcID: 0
Enabled flags: 0xFFFFFFF7
Title: 'Tests'
Items: (zero-terminated list)
0:
Name: 'Verify Test...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: 'Overnight Test...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Seek Test...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Test Through Driver...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: 'Test SCSI Direct Calls...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00An Error Occured while trying to reassign the defective block.
Shuts down your computer just like from the Finder‚Ñ¢ Desktop.
Begin the test.
Bring all volumes on the selected drive to the desktop.
There is no recognizable SCSI interface board at this slot.
Creating directory on ‘
Will automatically map defective blocks out of service during the test.
Prevents mounting of this volume while the computer is starting up.
You must click on a volume in the list above before you can mount it.
Items: (4 entries)
0:
Bounds: x1=310, y1=250, x2=370, y2=270
Type: 4
Info: 'OK'
1:
Bounds: x1=10, y1=26, x2=428, y2=229
Type: 0
Info: ''
2:
Bounds: x1=10, y1=5, x2=428, y2=21
Type: -120
Info: 'Detailed information about all partitions.'
3:
Bounds: x1=306, y1=246, x2=374, y2=274
Type: -128
Info: ''720K (DOS) Floppy Disk
SCSI Board Hardware Level:
This drive is now selected for mounting related operations.
Allows this test to use faster (blind) writes.
Your Mac volumes are displayed here. Click to select one of them.
Mac Volume
The SCSI bus in this slot is currently selected.
Select a drive from which to mount volumes.
Use more than nine but less than 257 kbytes.
Park this drive's heads before moving it.
Sorry, insufficient capacity to reassign any more blocks. Call your Dealer.
Menu ID: 130
ProcID: 0
Enabled flags: 0xFFFFFFFA
Title: 'Edit'
Items: (zero-terminated list)
0:
Name: 'Undo'
Icon number: 0
Key equivalent: 'Z' (0x5A)
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Cut'
Icon number: 0
Key equivalent: 'X' (0x58)
Mark character: 0x0
Style: 0x00
3:
Name: 'Copy'
Icon number: 0
Key equivalent: 'C' (0x43)
Mark character: 0x0
Style: 0x00
4:
Name: 'Paste'
Icon number: 0
Key equivalent: 'V' (0x56)
Mark character: 0x0
Style: 0x00
5:
Name: 'Clear'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00 Volume(s) Mounted!
Clicking here will disable error recovery on the selected drive.
Sorry, you have reached the maximum allowable number of partitions (16).
Items: (7 entries)
0:
Bounds: x1=166, y1=109, x2=236, y2=129
Type: 4
Info: 'Cancel'
1:
Bounds: x1=50, y1=109, x2=120, y2=129
Type: 4
Info: 'OK'
2:
Bounds: x1=12, y1=8, x2=286, y2=95
Type: -128
Info: ''
3:
Bounds: x1=64, y1=20, x2=275, y2=85
Type: -120
Info: ''
4:
Bounds: x1=22, y1=20, x2=54, y2=52
Type: 32
Info: ' '
5:
Bounds: x1=162, y1=105, x2=240, y2=133
Type: -128
Info: ''
6:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' r'Overnight Test, Pass:
Not Enough Room in heap zone
The Magneto Optical Cartridge Icon.
You must first select the drive to see the detailed partition information.
I was unable to remove from memory the device driver for this drive. Please restart your Mac from the "File" menu when you are finished.
Items: (10 entries)
0:
Bounds: x1=225, y1=175, x2=295, y2=195
Type: 4
Info: 'Cancel'
1:
Bounds: x1=80, y1=175, x2=150, y2=195
Type: 7
Info: ' '
2:
Bounds: x1=20, y1=25, x2=338, y2=91
Type: -120
Info: 'This dialog will let you set the amount of time in seconds your mac will wait for a hard disk at SCSI ID "0" to become ready. You may select values from 1 to 31 seconds (the default is 15).'
3:
Bounds: x1=80, y1=110, x2=184, y2=126
Type: -120
Info: 'Current Value:'
4:
Bounds: x1=80, y1=135, x2=165, y2=151
Type: -120
Info: 'New Value:'
5:
Bounds: x1=205, y1=110, x2=260, y2=125
Type: -120
Info: ''
6:
Bounds: x1=205, y1=135, x2=260, y2=150
Type: 16
Info: ''
7:
Bounds: x1=10, y1=15, x2=350, y2=100
Type: -128
Info: ''
8:
Bounds: x1=129, y1=8, x2=232, y2=24
Type: -120
Info: 'START UP DELAY'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' X'An SC-like cabinet.
Cool MacWillie, our Mascot.
Items: (6 entries)
0:
Bounds: x1=237, y1=193, x2=305, y2=213
Type: 4
Info: 'Cancel'
1:
Bounds: x1=147, y1=193, x2=215, y2=213
Type: 4
Info: 'Non - AV'
2:
Bounds: x1=232, y1=189, x2=310, y2=217
Type: -128
Info: ''
3:
Bounds: x1=10, y1=9, x2=42, y2=41
Type: -96
Info: ' '
4:
Bounds: x1=50, y1=10, x2=309, y2=175
Type: -128
Info: ''
5:
Bounds: x1=57, y1=193, x2=125, y2=213
Type: 4
Info: 'AV Setup'Format Failed!
Test is already in progress.
Items: (3 entries)
0:
Bounds: x1=200, y1=95, x2=260, y2=115
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=5, x2=320, y2=90
Type: -120
Info: '^0'
2:
Bounds: x1=10, y1=5, x2=42, y2=38
Type: -96
Info: ' 'Create approx. 80 Mb. for A/UX partitions and allocate the remainder to one Mac partition.
You must select a volume and an Icon to install.
Create a partition over each of the selected drive's zones (Works only on drives which use Zone Bit Recording).
Attempt to open locked file for writing.
Resume
External file system; file-system identifier is non-zero or path reference number is greater than 1024.
Password Incorrect!
Leave this dialog.
Menu ID: 132
ProcID: 0
Enabled flags: 0xFFFFDDEB
Title: 'Partition'
Items: (zero-terminated list)
0:
Name: 'Get Partition Info...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Customize Partitions...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Maximum Mac Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: '50% Mac Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Two 50% Mac Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Minimum Mac Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: 'Maximum A/UX Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: '50% A/UX Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: 'Minimum A/UX Setup...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
12:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
13:
Name: 'Zone Partitions...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Sorry, you must reformat this drive before you can customize your partitions.
This option is known to be dangerous on this drive.
This operation can NOT be performed because a volume on the drive is busy! File sharing may be active or this drive may contain the active system folder or other active files!
Restarts your computer just like from the Finder‚Ñ¢ Desktop.
Items: (13 entries)
0:
Bounds: x1=200, y1=175, x2=265, y2=195
Type: 4
Info: 'Cancel'
1:
Bounds: x1=65, y1=175, x2=130, y2=195
Type: 4
Info: 'Re-Size'
2:
Bounds: x1=55, y1=10, x2=307, y2=77
Type: -120
Info: 'Enter below the size you would like your partition to be. Please observe the minimum and maximum limits.
(1 Megabyte = 1024 K)'
3:
Bounds: x1=65, y1=145, x2=135, y2=161
Type: -120
Info: 'Max Size:'
4:
Bounds: x1=65, y1=85, x2=135, y2=101
Type: -120
Info: 'Min Size:'
5:
Bounds: x1=175, y1=145, x2=250, y2=161
Type: -120
Info: ''
6:
Bounds: x1=175, y1=85, x2=250, y2=101
Type: -120
Info: ''
7:
Bounds: x1=65, y1=115, x2=135, y2=131
Type: -120
Info: 'New Size:'
8:
Bounds: x1=175, y1=115, x2=250, y2=131
Type: 16
Info: ''
9:
Bounds: x1=10, y1=20, x2=42, y2=52
Type: -96
Info: ' '
10:
Bounds: x1=255, y1=85, x2=275, y2=101
Type: -120
Info: 'K'
11:
Bounds: x1=255, y1=115, x2=275, y2=131
Type: -120
Info: 'K'
12:
Bounds: x1=255, y1=145, x2=275, y2=161
Type: -120
Info: 'K'Scan SCSI bus at this slot.
Apple_Driver
Bad SCSI Command: BusTimeOutErr.
The SCSI priority your drive is using.
You must select a drive and a volume before you can do this command.
Your drive information.
Items: (3 entries)
0:
Bounds: x1=12, y1=10, x2=44, y2=42
Type: -96
Info: ' Ä'
1:
Bounds: x1=59, y1=10, x2=336, y2=60
Type: -120
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ∏'No Volumes
Drive Unreadable!
Items: (6 entries)
0:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
1:
Bounds: x1=70, y1=10, x2=320, y2=43
Type: -120
Info: 'Moving Partitions… This may take a while and CANNOT be interrupted!'
2:
Bounds: x1=40, y1=60, x2=300, y2=75
Type: -128
Info: ''
3:
Bounds: x1=20, y1=90, x2=141, y2=106
Type: -120
Info: 'Currently Moving:'
4:
Bounds: x1=160, y1=90, x2=320, y2=106
Type: -120
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ∏'Create, modify or delete password protection of the selected volume.
Click here to select the device at SCSI ID "6."
This option is considered dangerous by the utility.
Bad SCSI Command: SCSI Complete Error.
Zone
The built in SCSI bus is currently selected.
Items: (11 entries)
0:
Bounds: x1=340, y1=240, x2=440, y2=260
Type: 4
Info: 'DONE'
1:
Bounds: x1=295, y1=10, x2=480, y2=159
Type: -128
Info: ''
2:
Bounds: x1=105, y1=10, x2=280, y2=267
Type: 0
Info: ''
3:
Bounds: x1=10, y1=10, x2=70, y2=267
Type: 0
Info: ''
4:
Bounds: x1=80, y1=10, x2=96, y2=267
Type: 0
Info: ''
5:
Bounds: x1=340, y1=205, x2=440, y2=225
Type: 4
Info: 'Delete'
6:
Bounds: x1=310, y1=35, x2=464, y2=149
Type: -120
Info: 'Click mouse in grey region and drag to set size. If no free/grey space exists you must delete or shrink a partition to create room for the new one.'
7:
Bounds: x1=300, y1=170, x2=380, y2=190
Type: 4
Info: 'Password'
8:
Bounds: x1=320, y1=15, x2=455, y2=31
Type: -120
Info: 'TO ADD A PARTITION :'
9:
Bounds: x1=400, y1=170, x2=475, y2=190
Type: 4
Info: 'Resize'
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' x'Select the drive from which you wish to get information.
Sorry, you must remove write protection before you modify this drive!
Enter here the number of kbytes to transfer.
You must unlock your cartridge before you can change you Error Recovery parameters.
Menu ID: 133
ProcID: 0
Enabled flags: 0xFFFFF5FB
Title: 'Special'
Items: (zero-terminated list)
0:
Name: 'Get Volume Info...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
2:
Name: 'Set Start Up Delay...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Set Driver Cache...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'Set Write Verification...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: 'Set Interleave...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Set Error Recovery...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
7:
Name: 'Set Jaz Sleep Timer...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
8:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
9:
Name: 'Reassign A Block...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
10:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
11:
Name: 'System 7 Icons...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00The name of the volume whose password you are entering.
Sorry, this drive lacks the capacity to comply with this command...You need at least a 80Mb Hard Disk Subsystem!
Bad master directory block. You should reinitialize volume!
Start
The read/write permission of only one access path to a file can allow writing.
Select the drive you wish to change write verification parameters.
Once again, Lido 7 is the product name.
Put the selected icon onto selected volume.
Create A/UX support partitions and divide the remainder evenly between A/UX user and a Mac OS.
A Removable Media cabinet.
Not enough Memory in System Zone for driver! Try booting from the floppy diskette.
Macintosh II models.
The Macintosh Quadra 700.
Approximate progress of test.
Complete this command.
Items: (3 entries)
0:
Bounds: x1=190, y1=95, x2=250, y2=115
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=5, x2=320, y2=90
Type: -120
Info: '^0'
2:
Bounds: x1=10, y1=5, x2=43, y2=37
Type: -96
Info: ' 'Driver reference number specifies NIL handle in unit table.
Reassigned Blocks:
Problem during rename.
Selection
Items: (8 entries)
0:
Bounds: x1=190, y1=165, x2=265, y2=185
Type: 4
Info: 'Cancel'
1:
Bounds: x1=45, y1=165, x2=120, y2=184
Type: 4
Info: 'OK'
2:
Bounds: x1=41, y1=126, x2=238, y2=143
Type: 16
Info: ''
3:
Bounds: x1=38, y1=66, x2=256, y2=90
Type: 8
Info: ''
4:
Bounds: x1=17, y1=13, x2=49, y2=45
Type: 32
Info: ' '
5:
Bounds: x1=66, y1=7, x2=279, y2=64
Type: -120
Info: ''
6:
Bounds: x1=37, y1=97, x2=261, y2=121
Type: 8
Info: ''
7:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' …'You must restart or remount to see your new icon!
Complete this command.
Password Incorrect! Try again.
Unable to DeQueue volume: Entry not in specified Queue!
You must have at least one Macintosh volume to perform this operation.
Eject your cartridge so you can insert a new one.
Uninitialized
Our cool logo.
Click here to select the device at SCSI ID "3."
A/UX Root&Usr
Items: (8 entries)
0:
Bounds: x1=210, y1=190, x2=268, y2=210
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=190, x2=128, y2=210
Type: 4
Info: 'Cancel'
2:
Bounds: x1=206, y1=186, x2=272, y2=214
Type: -128
Info: ''
3:
Bounds: x1=50, y1=135, x2=300, y2=155
Type: 6
Info: 'Write Only'
4:
Bounds: x1=50, y1=155, x2=300, y2=175
Type: 6
Info: 'Write with Verification'
5:
Bounds: x1=10, y1=9, x2=42, y2=41
Type: -96
Info: ' '
6:
Bounds: x1=50, y1=10, x2=310, y2=130
Type: -128
Info: ''
7:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ô'Select the drive you wish to partition.
Bad SCSI Command: phase error.
Resume
Processor Device
Printer Device
Pause
Bad SCSI Command: compare error.
Set up, modify, or examine the partitions on the selected drive.
A/UX Eschatology 1
Click here to select the device at SCSI ID "2."
Search for storage devices connected to your Macintosh.
This drive parks automatically.
Driver Name:
Unable to DeQueue volume.
Items: (11 entries)
0:
Bounds: x1=191, y1=180, x2=304, y2=204
Type: 4
Info: 'Exit'
1:
Bounds: x1=18, y1=36, x2=322, y2=91
Type: -120
Info: 'For the sake of convenience, Error Recovery ‘Enabled’ means 8 retries and ECC applied. ‘Disabled’ means 0 retries and no ECC applied.'
2:
Bounds: x1=39, y1=120, x2=142, y2=155
Type: -120
Info: 'Error Recovery is currently:'
3:
Bounds: x1=49, y1=167, x2=124, y2=182
Type: 6
Info: 'Enabled'
4:
Bounds: x1=48, y1=192, x2=123, y2=207
Type: 6
Info: 'Disabled'
5:
Bounds: x1=25, y1=112, x2=155, y2=220
Type: -128
Info: ''
6:
Bounds: x1=178, y1=128, x2=322, y2=163
Type: -120
Info: '(Use Radio Buttons to change parameters)'
7:
Bounds: x1=12, y1=18, x2=329, y2=100
Type: -128
Info: ''
8:
Bounds: x1=112, y1=11, x2=226, y2=28
Type: -120
Info: ' ERROR RECOVERY '
9:
Bounds: x1=187, y1=176, x2=308, y2=208
Type: -128
Info: ''
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' |'Driver updated successfully.
Don't complete this command.
Sorry, your request will cause the maximum number of partitions to be exceeded. You will need to delete a partition before you can complete this resize.
Items: (10 entries)
0:
Bounds: x1=149, y1=202, x2=209, y2=222
Type: 4
Info: 'Cancel'
1:
Bounds: x1=35, y1=202, x2=95, y2=222
Type: 4
Info: 'OK'
2:
Bounds: x1=38, y1=38, x2=205, y2=58
Type: 6
Info: 'Create new Password'
3:
Bounds: x1=38, y1=67, x2=182, y2=87
Type: 6
Info: 'Change Password'
4:
Bounds: x1=37, y1=97, x2=172, y2=118
Type: 6
Info: 'Delete Password'
5:
Bounds: x1=41, y1=137, x2=206, y2=154
Type: -120
Info: 'This volume is currently:'
6:
Bounds: x1=41, y1=163, x2=206, y2=179
Type: -120
Info: ''
7:
Bounds: x1=14, y1=28, x2=225, y2=130
Type: -128
Info: ''
8:
Bounds: x1=58, y1=6, x2=186, y2=23
Type: -120
Info: 'PASSWORD OPTIONS'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' »'Arbitration
Overnight Testing Complete
Not enough physical memory to run this program!
Attempt to remove an open driver.
Items: (12 entries)
0:
Bounds: x1=198, y1=205, x2=283, y2=225
Type: 4
Info: 'Cancel'
1:
Bounds: x1=57, y1=205, x2=137, y2=225
Type: 4
Info: 'OK'
2:
Bounds: x1=32, y1=23, x2=302, y2=41
Type: 6
Info: 'Removable'
3:
Bounds: x1=32, y1=80, x2=302, y2=98
Type: 6
Info: 'BlReads/BlWrite +(BlReads/BlWrite)'
4:
Bounds: x1=32, y1=99, x2=302, y2=117
Type: 6
Info: 'BlReads/BlWrite +(BlReads/NBWrite)'
5:
Bounds: x1=32, y1=118, x2=302, y2=136
Type: 6
Info: 'BlReads/BlWrite +(NBReads/NBWrite)'
6:
Bounds: x1=32, y1=137, x2=302, y2=155
Type: 6
Info: 'BlReads/NBWrite +(BlReads/NBWrite)'
7:
Bounds: x1=32, y1=156, x2=302, y2=174
Type: 6
Info: 'BlReads/NBWrite +(NBReads/NBWrite)'
8:
Bounds: x1=32, y1=175, x2=302, y2=193
Type: 6
Info: 'NBReads/NBWrite +(NBReads/NBWrite)'
9:
Bounds: x1=32, y1=42, x2=302, y2=60
Type: 6
Info: 'Magneto Optical'
10:
Bounds: x1=32, y1=61, x2=302, y2=79
Type: 6
Info: 'Floptical'
11:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' 'Number of seconds you Macintosh is currently waiting for devices at SCSI ID "0."
Stop test if in progress, otherwise leave dialog.
Macintosh IIcx & IIci models.
Macintosh
PowerBooks
The Macintosh Quadra 900 series.
A serious error occured while moving your partition(s). DATA MAY BE LOST!! We recommend you restore your data from your backups!!
Begin the verify test.
Items: (3 entries)
0:
Bounds: x1=195, y1=95, x2=255, y2=115
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=5, x2=320, y2=90
Type: -120
Info: '^0'
2:
Bounds: x1=10, y1=5, x2=42, y2=37
Type: -96
Info: ' 'Enter here the block number at which you want the test to begin.
Error during GetFPos.
, was found. Would you like to Reassign it now?
OSErr =
Bus Free
Items: (8 entries)
0:
Bounds: x1=200, y1=140, x2=270, y2=160
Type: 4
Info: 'Cancel'
1:
Bounds: x1=50, y1=140, x2=120, y2=160
Type: 4
Info: 'OK'
2:
Bounds: x1=69, y1=93, x2=266, y2=110
Type: 16
Info: ''
3:
Bounds: x1=65, y1=14, x2=283, y2=38
Type: 8
Info: ''
4:
Bounds: x1=17, y1=13, x2=49, y2=45
Type: 32
Info: ' '
5:
Bounds: x1=195, y1=136, x2=275, y2=164
Type: -128
Info: ''
6:
Bounds: x1=65, y1=49, x2=278, y2=72
Type: 8
Info: ''
7:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' 'Format was successful! Please select a setup option from the "Partition" menu.
Sorry, you can only password a Macintosh Volume!
Menu ID: 129
ProcID: 0
Enabled flags: 0xFFFFFFB1
Title: 'File'
Items: (zero-terminated list)
0:
Name: 'Park'
Icon number: 0
Key equivalent: 'P' (0x50)
Mark character: 0x0
Style: 0x00
1:
Name: 'Eject Cartridge '
Icon number: 0
Key equivalent: 'E' (0x45)
Mark character: 0x0
Style: 0x00
2:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
3:
Name: 'Restart...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
4:
Name: 'ShutDown...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
5:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
6:
Name: 'Quit'
Icon number: 0
Key equivalent: 'Q' (0x51)
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Not Enough Memory for HParmBlkPtr!
Too many bad blocks, please reformat!
Click here to select the SCSI device at SCSI ID "6."
Bring all volumes on this drive to the desktop.
Bad SCSI Command: SequenceErr.
Detailed error information displayed in here.
Items: (9 entries)
0:
Bounds: x1=210, y1=205, x2=268, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=205, x2=138, y2=225
Type: 4
Info: 'Cancel'
2:
Bounds: x1=206, y1=201, x2=272, y2=229
Type: -128
Info: ''
3:
Bounds: x1=45, y1=125, x2=295, y2=145
Type: 6
Info: 'Write Only'
4:
Bounds: x1=45, y1=145, x2=295, y2=165
Type: 6
Info: 'Write with Drive Verification'
5:
Bounds: x1=45, y1=165, x2=295, y2=185
Type: 6
Info: 'Write with Computer Verification'
6:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
7:
Bounds: x1=50, y1=10, x2=310, y2=110
Type: -128
Info: ''
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ô'Click here to select the device at SCSI ID "4."
Macintosh Volume
Tells your Machintosh to look for a System Folder on this volume to boot from.
Exit
Not Password Protected
W.O.R.M. Device
CD-ROM Device
Password Protected
Ready to verify
Items: (11 entries)
0:
Bounds: x1=75, y1=180, x2=145, y2=200
Type: 4
Info: 'Cancel'
1:
Bounds: x1=245, y1=180, x2=315, y2=200
Type: 4
Info: 'OK'
2:
Bounds: x1=20, y1=30, x2=351, y2=97
Type: 8
Info: 'Enter the size of the cache in Kbytes you would like the driver to use with the currently selected hard disk. You may choose values from 0 to 64. Mac Plus users will be limited to 32.'
3:
Bounds: x1=50, y1=120, x2=200, y2=135
Type: -120
Info: 'Current Cache Size:'
4:
Bounds: x1=50, y1=150, x2=200, y2=165
Type: -120
Info: 'Selected Cache Size:'
5:
Bounds: x1=260, y1=120, x2=310, y2=135
Type: 8
Info: ''
6:
Bounds: x1=260, y1=150, x2=310, y2=165
Type: 16
Info: ''
7:
Bounds: x1=10, y1=19, x2=362, y2=107
Type: -128
Info: ''
8:
Bounds: x1=140, y1=13, x2=236, y2=30
Type: -120
Info: ' DRIVER CACHE'
9:
Bounds: x1=71, y1=176, x2=149, y2=204
Type: -128
Info: ''
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ó'Leave Dialog.
Bring this volume to the desktop.
Scratch
Click here to select the device at SCSI ID "5."
Bad SCSI Command: MgrBusyErr.
Click on the drive you wish to mount.
No suitable device found at ID "6."
Error on Generic Parameters to Mode Select!
No volumes in drive queue to mount for test!
Menu ID: 128
ProcID: 0
Enabled flags: 0xFFFFFFFB
Title: ''
Items: (zero-terminated list)
0:
Name: 'About Lido 7...'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x02
1:
Name: '-'
Icon number: 0
Key equivalent: 0x0
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Please select a starting block between zero and the last block of the drive.
Sorry, you do not have enough free space to create a custom desktop Icon.
Reset
Attempted to move into offspring.
Specified volume does not exist.
A Bad Block, #
Your drive information.
Enter the new waiting time here.
Arbitration failed!! Check connections and terminators on all SCSI devices.
Install color icons onto any currently mounted hard disk volume.
Our Logo.
Leave this dialog.
Evenly divide all the avialable space on the drive into two Mac partitions.
DATA OUT
Overnight Test, Pass: 1
File not open.
All allocation blocks on the volume are full.
Sorry, Apple UNIX‚Ñ¢ does not support 1K sector sizes!
Block Reassigned Successfully!
Sorry, you must format your drive before you can use this driver!
Error in verifying format!
Items: (6 entries)
0:
Bounds: x1=100, y1=85, x2=160, y2=105
Type: 4
Info: 'OK'
1:
Bounds: x1=215, y1=85, x2=275, y2=105
Type: 4
Info: 'Cancel'
2:
Bounds: x1=55, y1=10, x2=320, y2=75
Type: -120
Info: ''
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
4:
Bounds: x1=96, y1=81, x2=164, y2=109
Type: 0
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ê'Click on the drive you wish to setup.
Bad SCSI Command: Arbitration Failure.
Click here to select the device at SCSI ID "1."
A/UX Root
No suitable device found at ID "4."
Communications Device
Current Block #
Please enter new password for:
Please enter old password for:
Verifying…
Medium Changer Device
Click here to select the SCSI device at SCSI ID "4."
A/UX Swap
Click here to select the device at SCSI ID "0."
Items: (3 entries)
0:
Bounds: x1=223, y1=92, x2=283, y2=112
Type: 4
Info: 'OK'
1:
Bounds: x1=71, y1=7, x2=332, y2=86
Type: 8
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Á'Bad SCSI Command: Bad Parameter or TIB opcode.
Formats and allocates all available space on the drive for use under the Macintosh system software.
This test will take from 30 seconds to a few minutes and will use the drive's SCSI Driver. Data transfer rate is measured in Kilobytes per Second. Elapsed time is critical so do not touch anything while test is in progress!!!
You must unlock your cartridge before you can change the driver flag!
You must unlock your cartridge before you can update drivers.
Error Recovery successfully enabled!
Your changes will not take effect until after restart or remount!
Directory Not Found.
No Errors
File not found.
Re-Selection
Use half the available space for a Mac partition, and leave the remainder free.
Graphical representation of space used on the volume.
Don't complete this command.
Shows graphical representation of space used on the volume.
Save new write verification setting.
Macintosh IIsi and LC.
Select any drive to enable color icon installation.
DATA IN
Specified volume is already mounted and on-line.
Bad file or volume name.
File is busy; one or more files are open; directory not empty or working directory control block is open.
Ready to start Overnight test
This Operation Will DESTROY ALL DATA In This Volume. Are You Sure You Want To Do This?
No Volumes set to Mount at startup! Please use UMount!
Sorry, you must have SCSI driver 7.0 or later to use this feature! To put the current driver on your drive click the "Update" button.
Please select a transfer size between 1 and 128 kilobytes!
Sorry, you must remove write protection before you can perform this test!
Don't complete this command.
Hardware error, contact your dealer!
An Error Occured While Updating Your Drive!
Menu ID: 130
ProcID: 0
Enabled flags: 0xFFFFFFFF
Title: 'Edit'
Items: (zero-terminated list)
0:
Name: 'Cut'
Icon number: 0
Key equivalent: 'X' (0x58)
Mark character: 0x0
Style: 0x00
1:
Name: 'Copy'
Icon number: 0
Key equivalent: 'C' (0x43)
Mark character: 0x0
Style: 0x00
2:
Name: 'Paste'
Icon number: 0
Key equivalent: 'V' (0x56)
Mark character: 0x0
Style: 0x00
Note: template did not parse all data in resource; remaining data: 00Formats the selected drive and lets you choose partitioning options.
A/UX Usr
Put the latest and greatest SCSI drivers onto this drive.
Bad SCSI Command: Communications Error.
Click here to select the SCSI device at SCSI ID "5."
Explains individual list options.
Scanner Device
Caution!! Do not forget your password. Be aware that the password is case-sensitive.
Error(s) Found
Items: (15 entries)
0:
Bounds: x1=360, y1=86, x2=420, y2=106
Type: 4
Info: 'Start'
1:
Bounds: x1=126, y1=4, x2=428, y2=75
Type: -128
Info: ''
2:
Bounds: x1=27, y1=95, x2=99, y2=133
Type: 64
Info: '<'
3:
Bounds: x1=127, y1=32, x2=427, y2=48
Type: -128
Info: ''
4:
Bounds: x1=134, y1=52, x2=278, y2=66
Type: -120
Info: 'No Errors'
5:
Bounds: x1=256, y1=126, x2=334, y2=146
Type: -120
Info: ''
6:
Bounds: x1=360, y1=125, x2=420, y2=145
Type: 4
Info: 'Exit'
7:
Bounds: x1=5, y1=4, x2=127, y2=75
Type: 0
Info: ''
8:
Bounds: x1=134, y1=12, x2=250, y2=28
Type: -120
Info: 'Ready to Verify'
9:
Bounds: x1=256, y1=88, x2=331, y2=105
Type: 16
Info: '0'
10:
Bounds: x1=164, y1=80, x2=221, y2=112
Type: -120
Info: 'Starting Block'
11:
Bounds: x1=164, y1=118, x2=215, y2=149
Type: -120
Info: 'Last Block'
12:
Bounds: x1=356, y1=82, x2=424, y2=110
Type: -128
Info: ''
13:
Bounds: x1=253, y1=123, x2=334, y2=145
Type: 0
Info: ''
14:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' †'Items: (18 entries)
0:
Bounds: x1=274, y1=179, x2=334, y2=199
Type: 4
Info: 'Start'
1:
Bounds: x1=142, y1=166, x2=223, y2=203
Type: 64
Info: '<'
2:
Bounds: x1=126, y1=32, x2=450, y2=48
Type: 0
Info: ''
3:
Bounds: x1=270, y1=90, x2=415, y2=107
Type: -120
Info: 'No Errors'
4:
Bounds: x1=384, y1=179, x2=444, y2=199
Type: 4
Info: 'Exit'
5:
Bounds: x1=5, y1=90, x2=102, y2=110
Type: 5
Info: 'Post Errors'
6:
Bounds: x1=270, y1=175, x2=338, y2=203
Type: 0
Info: ''
7:
Bounds: x1=134, y1=12, x2=330, y2=28
Type: -120
Info: 'Ready to Verify'
8:
Bounds: x1=170, y1=110, x2=198, y2=125
Type: 16
Info: '32'
9:
Bounds: x1=115, y1=130, x2=254, y2=162
Type: -120
Info: 'You may use values between 1 and 128.'
10:
Bounds: x1=5, y1=120, x2=105, y2=140
Type: 5
Info: 'Blind Reads'
11:
Bounds: x1=5, y1=180, x2=120, y2=200
Type: 5
Info: 'Auto Reassign'
12:
Bounds: x1=125, y1=4, x2=450, y2=79
Type: -128
Info: ''
13:
Bounds: x1=108, y1=90, x2=262, y2=107
Type: -120
Info: 'Transfer Size (KBytes):'
14:
Bounds: x1=5, y1=150, x2=108, y2=170
Type: 5
Info: 'Blind Writes'
15:
Bounds: x1=4, y1=4, x2=126, y2=79
Type: 0
Info: ''
16:
Bounds: x1=270, y1=110, x2=446, y2=167
Type: 0
Info: ''
17:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' °'Bad Block #
Password
Optical Memory Device
Look for devices connected to your Mac's SCSI port.
No suitable device found at ID "5."
No Error
Click on the drive you wish to update.
Unreserved 1
Click on the drive you wish to format.
An Error Occured While Configuring Your Drive!
Firmware error, contact your dealer!
Use more than nine but less than 257 kbytes.
Sorry, this drive does not support standard Error Recovery parameters
Error Recovery successfully disabled!
Your changes will not take effect until after restart!
Update successful! I am unable to remove your old device driver from memory because it is busy. The new driver will be used the next time you (re)start your Mac.
Unable to set block size to 1,024 bytes. The current (default) block size will remain unchanged.
This Operation Will DESTROY ALL DATA On This Drive. Are You Sure You Want To Do This?
File is locked.
Exit
File directory full.
COMMAND
Driver reference number does not match unit table.
Use all the available space on the drive for a Mac partition.
Do not change write verification level.
Macintosh SE & SE/30 models.
Macintosh Portable.
Leave this dialog.
You should not be moving the mouse during the test!!!
Read data does not match write data
Too many working directories open.
Sorry, You must have System Software Version 6.0.4 or higher to run this program!
Set the time you want your Mac to wait for a drive at ID "0" to become ready before booting.
An error occured while writing data to test file!
Click on the partition you wish to delete.
Sector Size = 1024 bytes.
I cannot save data on re-sized A/UX partitions!!! Do you wish to continue anyway?
Items: (26 entries)
0:
Bounds: x1=225, y1=5, x2=442, y2=55
Type: -120
Info: 'Click on a volume in the list below to make changes. Double clicking mounts the volume.'
1:
Bounds: x1=185, y1=2, x2=445, y2=60
Type: -128
Info: ''
2:
Bounds: x1=10, y1=154, x2=155, y2=174
Type: 6
Info: 'ID 0'
3:
Bounds: x1=10, y1=135, x2=155, y2=155
Type: 6
Info: 'ID 1'
4:
Bounds: x1=10, y1=116, x2=155, y2=136
Type: 6
Info: 'ID 2'
5:
Bounds: x1=10, y1=97, x2=155, y2=117
Type: 6
Info: 'ID 3'
6:
Bounds: x1=10, y1=78, x2=155, y2=98
Type: 6
Info: 'ID 4'
7:
Bounds: x1=10, y1=59, x2=155, y2=79
Type: 6
Info: 'ID 5'
8:
Bounds: x1=10, y1=40, x2=155, y2=60
Type: 6
Info: 'ID 6'
9:
Bounds: x1=25, y1=190, x2=160, y2=210
Type: 4
Info: 'Re-Scan'
10:
Bounds: x1=3, y1=2, x2=170, y2=182
Type: -128
Info: ''
11:
Bounds: x1=25, y1=215, x2=160, y2=235
Type: 4
Info: 'Mount All'
12:
Bounds: x1=185, y1=66, x2=413, y2=162
Type: 0
Info: ''
13:
Bounds: x1=25, y1=240, x2=160, y2=260
Type: 4
Info: 'Mount Volume'
14:
Bounds: x1=250, y1=195, x2=425, y2=213
Type: 4
Info: 'Password'
15:
Bounds: x1=230, y1=220, x2=410, y2=238
Type: 5
Info: 'Don't Mount at Startup'
16:
Bounds: x1=270, y1=170, x2=445, y2=188
Type: 6
Info: 'Boot from this volume'
17:
Bounds: x1=50, y1=5, x2=154, y2=37
Type: -120
Info: 'Select a drive below.'
18:
Bounds: x1=210, y1=245, x2=390, y2=263
Type: 5
Info: 'Protect from writes'
19:
Bounds: x1=195, y1=165, x2=204, y2=258
Type: -64
Info: ' Ä'
20:
Bounds: x1=215, y1=165, x2=224, y2=233
Type: -64
Info: ' Å'
21:
Bounds: x1=235, y1=165, x2=244, y2=208
Type: -64
Info: ' Ç'
22:
Bounds: x1=255, y1=165, x2=264, y2=183
Type: -64
Info: ' É'
23:
Bounds: x1=10, y1=5, x2=42, y2=37
Type: -96
Info: ' Å'
24:
Bounds: x1=190, y1=5, x2=222, y2=37
Type: -96
Info: ' Ç'
25:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ä'Our Lido 7 logo.
Device:
Sorry, this device does not appear to support the Write and Verify command (OpCode = $2E)!
Bad SCSI Command: SCSI Complete Error.
Sorry, this device does not appear to support the Write and Verify command (OpCode = $2E)! "Computer Verification" will be selected instead.
SCSI ID:
Bad SCSI Command: BusTimeOutErr.
Causes utility to scan once through the SCSI ID's.
Items: (7 entries)
0:
Bounds: x1=40, y1=90, x2=115, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=230, y1=90, x2=305, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=50, y1=60, x2=280, y2=76
Type: 16
Info: ''
3:
Bounds: x1=70, y1=10, x2=255, y2=26
Type: -120
Info: 'Please enter Password for:'
4:
Bounds: x1=70, y1=30, x2=255, y2=46
Type: 8
Info: ''
5:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
6:
Bounds: x1=290, y1=10, x2=322, y2=42
Type: -128
Info: ''Moving partitions... This may take a while and CANNOT be interrupted!!!
Remove this volume from drive and make it free space.
An error occured while allocating contiguous space for test file!
Select any drive to change your start up delay.
Not enough room in system heap for drive queue entry!
Volume not on-line.
at block
Don't complete this command.
Driver reference number does not match unit table.
Reference number specifies nonexistent access path.
Read error at block
Sorry, You must be using drivers from SCSI Utility 7.0 or later to mount individual partitions!
Select a drive to change its error recovery parameters.
Select the drive on which you wish to perform the driver SCSI Test.
Scan built in SCSI bus…
Items: (30 entries)
0:
Bounds: x1=304, y1=264, x2=369, y2=284
Type: 4
Info: 'Exit'
1:
Bounds: x1=115, y1=265, x2=195, y2=285
Type: 4
Info: 'Install'
2:
Bounds: x1=20, y1=90, x2=52, y2=122
Type: 32
Info: '-'
3:
Bounds: x1=70, y1=90, x2=102, y2=122
Type: 32
Info: '.'
4:
Bounds: x1=120, y1=90, x2=152, y2=122
Type: 32
Info: '/'
5:
Bounds: x1=170, y1=90, x2=202, y2=122
Type: 32
Info: '0'
6:
Bounds: x1=220, y1=90, x2=252, y2=122
Type: 32
Info: '1'
7:
Bounds: x1=20, y1=130, x2=52, y2=162
Type: 32
Info: '2'
8:
Bounds: x1=70, y1=130, x2=102, y2=162
Type: 32
Info: '3'
9:
Bounds: x1=120, y1=130, x2=152, y2=162
Type: 32
Info: '4'
10:
Bounds: x1=170, y1=130, x2=202, y2=162
Type: 32
Info: '5'
11:
Bounds: x1=220, y1=130, x2=252, y2=162
Type: 32
Info: '6'
12:
Bounds: x1=20, y1=170, x2=52, y2=202
Type: 32
Info: '7'
13:
Bounds: x1=70, y1=170, x2=102, y2=202
Type: 32
Info: '8'
14:
Bounds: x1=120, y1=170, x2=152, y2=202
Type: 32
Info: '9'
15:
Bounds: x1=170, y1=170, x2=202, y2=202
Type: 32
Info: ':'
16:
Bounds: x1=220, y1=170, x2=252, y2=202
Type: 32
Info: ';'
17:
Bounds: x1=20, y1=210, x2=52, y2=242
Type: 32
Info: '<'
18:
Bounds: x1=70, y1=210, x2=102, y2=242
Type: 32
Info: '='
19:
Bounds: x1=120, y1=210, x2=152, y2=242
Type: 32
Info: '>'
20:
Bounds: x1=170, y1=210, x2=202, y2=242
Type: 32
Info: '?'
21:
Bounds: x1=220, y1=210, x2=252, y2=242
Type: 32
Info: '@'
22:
Bounds: x1=285, y1=210, x2=337, y2=241
Type: -120
Info: 'Current
Icon:'
23:
Bounds: x1=365, y1=210, x2=397, y2=242
Type: -128
Info: ''
24:
Bounds: x1=275, y1=85, x2=403, y2=197
Type: -128
Info: ''
25:
Bounds: x1=45, y1=10, x2=77, y2=42
Type: -96
Info: ' '
26:
Bounds: x1=100, y1=10, x2=381, y2=75
Type: -120
Info: 'TO INSTALL A SYSTEM 7 ICON:
1) Select a Volume in the list to the right,
2) Click on desired icon to the left,
3) Click the "Install" Button.'
27:
Bounds: x1=20, y1=5, x2=429, y2=80
Type: -128
Info: ''
28:
Bounds: x1=300, y1=260, x2=373, y2=288
Type: -128
Info: ''
29:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ¬'Your partitions
An error occured while creating a file on this volume!
This option is known to be dangerous on this drive.
Plugging IN JAZ Params
Your Mac's Icon
1.44 floppy disk
Sorry, I am unable to display requested information on this drive. No recognizable partition map was found!
Sorry, you have run out of avaliable physical RAM to properly run this program. I must exit!!!
Not a Macintosh Disk
Your Macintosh model.
Installing Color Icon...
"Blind" writes are faster too.
An error occured while opening test file on this volume!
Locks signify password status.
Measures how fast you can transfer data between this drive, its driver, and your Macintosh.
The interleave the Utility has chosen as best for your drive on this Macintosh.
Changes the way a drive handles its own error handling.
Arbitration failed!! Check for proper termination and SCSI ID conflicts.
Write error at block
Attempt to position before start of file.
Specified volume is already mounted and on-line.
Unable to read drive Capacity!
Attempt to remove an open driver.
Volume is locked by a software flag.
Additional Sense = $
Don't I look good in color?
No removable drive selected or no cartridge installed.
Items: (11 entries)
0:
Bounds: x1=256, y1=138, x2=336, y2=156
Type: 4
Info: 'Open'
1:
Bounds: x1=59, y1=1152, x2=77, y2=1232
Type: 4
Info: ''
2:
Bounds: x1=256, y1=163, x2=336, y2=181
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=39, x2=347, y2=59
Type: -128
Info: ''
4:
Bounds: x1=256, y1=68, x2=336, y2=86
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=93, x2=336, y2=111
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=39, x2=230, y2=185
Type: 0
Info: ''
7:
Bounds: x1=229, y1=39, x2=246, y2=185
Type: 0
Info: ''
8:
Bounds: x1=252, y1=124, x2=340, y2=125
Type: -128
Info: ''
9:
Bounds: x1=20, y1=1044, x2=116, y2=1145
Type: -120
Info: ''
10:
Bounds: x1=65, y1=195, x2=334, y2=211
Type: -120
Info: 'Where is "Utility Help? - I Dunno...'Change the password you enter when you want to mount the selected volume.
Click on the volume you wish to password.
Click here to select the SCSI device at SCSI ID "3."
Sorry, I cannot eject this cartridge as you have a busy file on this volume(s).
Updating volume information block...
Causes utility to scan through each SCSI ID until you click the mouse.
Click here to select or get information about the device at SCSI ID "7."
RM Hard Disk Drive
Sorry, you can assign a password to Macintosh volumes!
A non-media error occured: Sense Key =
Hard Disk Drive
No reassigned blocks
Begin the Overnight test.
Installing your Driver...
Please Press Button to Eject Cartridge.
Create new, change, or delete password from this volume.
No suitable device found at ID "3."
This volume already has a password.
Items: (7 entries)
0:
Bounds: x1=380, y1=270, x2=450, y2=290
Type: 4
Info: 'Done'
1:
Bounds: x1=130, y1=270, x2=330, y2=286
Type: 7
Info: ' '
2:
Bounds: x1=40, y1=270, x2=90, y2=285
Type: 8
Info: ' '
3:
Bounds: x1=15, y1=35, x2=475, y2=255
Type: 0
Info: ''
4:
Bounds: x1=136, y1=10, x2=323, y2=28
Type: 8
Info: 'This is no longer supported.'
5:
Bounds: x1=376, y1=266, x2=454, y2=294
Type: 0
Info: ''
6:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' –'Parting is such sweet sorrow‚Ķ
The name of the volume you are passwording.
SCSI Command Err =
Attempt to do hierarchical operation on nonhierarchical volume.
Driver reference number specifies NIL handle in unit table.
Driver Discriptor Map is not valid. Please reformat this drive.
13
Aren't color icons great?
MESSAGE IN
Not enough memory to load driver! Try booting from floppy diskette.
Sense Key = $
Volume is locked by a hardware setting.
Select a drive to change its interleave.
Sorry, you need Macintosh System Software 6.0.4 or higher to use this utility!
Complete this command.
Configuring Drive...
Utility Help
Our logo in living color.
Optical Disk Drive
Not enough memory! You need at least 512KB free memory to run this program.
Inquiry and request auxiliary sense commands failed!
Floptical‚Ñ¢ Disk Drive
Test is already in progress.
INFO
Formatting Drive...
Don't complete this command.
Sorry, you can only format 88MB cartridges in this mechanism!
Change your drive's interleave ratio prior to a format.
Items: (2 entries)
0:
Bounds: x1=200, y1=76, x2=260, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=52, y1=6, x2=318, y2=71
Type: -120
Info: '^0'Read/write permission does not allow writing.
OSErr =
Partition entry invalid. Please reformat this drive.
Undefined
