Jul 85 Mousehole
Volume Number: 1
Issue Number: 8
Column Tag: Mousehole Report
Mousehole Report 
Printing and the Tecmar
MacoWaco
Nothing will get my Tecmar to let my Imagewriter print. Then on top of that, I
tried Finder 4.1 on it and I can't copy a file onto it!
Tecmar and Finder 4.1
Rusty Hodge
I have heard from some people that the "new" imagewriter driver and Finder 4.1
cause the Tecmar's print spooling to go out to lunch. It may be that reformatting is the
only solution. Finders 3.3x and above need to be patched to have the "verify" routine
no-opped.
Finder Patch for Tecmar
Macowaco
The patch for the Tecmar Finder is the following: change A002 57CA FFE2 to
4E71 4E71 4E71 using FEDIT. The second A002 fround using the Hex Search is it.
Eliminates the "Verify" routine used in 4.1, but not used on earlier Finder's before
3.3x.
Rom Bug for I/O Traps
(name withheld to protect the guilty)
The effect of this bug is that if you perform an I/O trap call within an SCC
interrupt routine or within a VBL task, your Macintosh may bomb. Assume A0 contains
the pointer to the I/O parameter block:
403924: LEA $360,A1 ; pointer to file system queue
header
403928: JSR *-$2E08 ; Enqueue pb (A0) on file system
queque (A1)
40392C: MOVE SR, -(SP) ; save status
40392E ORI #$300,SR ; disable SCC and VBL interrupts
403932: BSET #0,$360 ;set file system busy bit
Suppose an SCC or VBL interrupt occurs during execution of the instruction at
40392C. At this time, the parameter block had been enqued on the file system queue,
but the busy bit has not been set. If the interrupt handler performs an I/O trap, then
that I/O as well as the one in the queue will be completed before the interrupt handler
returns. When it does return, the file system queue is empty, and the instruction at
403932 sets the busy bit. Code following 403932 then attempts to dequeue a
parameter block and execute it's command code, causing a bomb.
A similar sequence of code for device drivers begins at 40118E. This code
exhibits the same problem except that the timing hole is two instructions wdie. Thus,
if the file system or a device driver queue is not empty and the busy bit is not set, you
MUST NOT perform the I/O trap.
What is the solution? Simple. If the queue is not empty and the busy bit is not
set, set the busy bit yourself, perform your async I/O trap, and reset the busy bit.
Hence, your I/O is simply enqueued, and when you return, the interrupted ROM code
precesses the queued I/O calls correctly. This bug is known at Apple and will be fixed
in the next ROM.
Finder 4.1 Bug
Dave Kelly
While trying to do a disk copy using the Finder, the destination disk's ICON
disappeared and the startup disk commenced to copy itself onto ITSELF! I restarted
everything by hitting reset but the Finder was missing from the system folder.
Something is kind of fishy here. Anyone else see any weird things like this?
[Yes, I have had icons disappear or move erratically under Finder 4.1. I assume
it is a warning the Finder or desktop has been trashed and it's best to shut down at once.
Version 4.1 definitely has a bug related to tracking icons on the desktop. -Ed.]
More Finder 4.1 Icon Bugs
Macin Stosh
Finder 4.1 seemed to be working great until I got a "Disk needs minor repairs...
alert. When I checked the desktop, I noticed half the files had lost their icon pictures.
Here's an interesting way to make your write 4.5 bomb: go to the search and replace
window and hit "Command-Enter"...
Paste into the Calculator
Ant Killer
Did you know that you can paste what's in the clipboard to the calculator and it
will work just like you had typed it in? (Well, it does.)
New Software Releases
Video Whiz
Just got the new "Official" update stuff from Apple; Write 4.5, Paint 1.5, Finder
4.1 and a new combo Font/Desk accessory Mover. The new paint allows "smoothing
with the Laser to increase resolution.
Thunderscan / Appletalk bug
Brett
Thunderscan uses the battery-backed up RAM and in fact looks at a location used
by Appletalk. Removing the battery for 30 seconds after turning off the computer will
clear memory and allow the thunderscan to work (until you use Appletalk again).
Product description on the 20 meg disk using the external drive connector is
expected shortly. [What about recent announcements that Apple was shutting down the
disk project in favor of buying the technology on the outside? -Ed.]
Building Drivers
Bob Denny
To build a driver, start your assembly with a RESOURCE directive:
RESOURCE 'DRVR' id '.XXX' atr
where "id" is the resource ID, "atr" are the resource attributes (usually at least
system heap). The above example will give a driver names ".XXX". Following the
RESOURCE directive, code the driver flags words, then the driver dispatch table. Note
that the dispatch table does not need to be coded using offset. Just do this:
DC.W Open
DC.W Prime
... etc.
The link'll do the rest. (Note the linker will not resolve references across
mutiple .REL files in the /RESOURCES section. Your driver must end up as a single
.REL file.) The key to understanding how the MDS assembler and linker handle code
resources is that the linker will resolve all relocatable references against a base
"address" of zero. Therefore the use of the driver routine lables as shown above will
automatically translate to offsets to the repective entry points. Neat, eh? Just keep the
rest of the driver "position independent".
Next link the driver with a control file like this:
/OUTPUT XXX.DRVR
/TYPE 'ZSYS' 'MACS'
/RESOURCES
XXX.REL
$
The /type directive makes the driver image file have the "little Mac" icon like
the finder and sytem. It's optional.
Greyed-Out Text
Bob Denny
Someone asked how to gray out text. Text is grayed out by painting it's enclosing
rectangle with "GRAY" pattern and the pen in BIC mode. Apparently you can't just write
gray text. Here is the code from the defProc for buttons, with my comments:
MOVE.L A4, -(SP) ; (SP) -> button rect
MOVE.L #$00010003, -(SP) ; shrink amt.
_InsetRect ;shrink rect.
MOVE.L A4, -(SP) ; (sp)=shrunken rect
MOVE.L (A5), A0 ;A0=>QD globals
PEA Gray(A0) ; (sp)=gray pat
_PenPat ;make pen gray
MOVE #patBIC, -(SP) ;bit-clear BIC mode
_PenMOde ; make bit-bashing pen
_PaintRect ; BIC-out text rectangle
_PenNormal
MOVE.L A4, -(SP) ; (sp)-> shrunk rect
MOVE.L #$FFFFFFFD, -(SP) ; expand
_InsetRect ; expand button rect.
Referenced by (2):