Nov 87 Mousehole
Volume Number: 3
Issue Number: 11
Column Tag: Mousehole Report
Mousehole Report 
By Rusty Hodge, Mousehole BBS
EventRecord question
From: Frank Henriquez
I’ve noticed a few programs that define the EventRecord as a constant.
Message: DC.L 0 etc..
Since EventRecord is very much a variable, isn’t defining it as a constant, and
therefore a code segment resident, a big mistake? ( thereby asking for trouble with the
68020 and a real MMU).
From: Jim Reekes
Yes, defining the EventRecord (or any variable data) as a DC is a *serious*
mistake. This code will break under future systems, and probably caching type
processors like the 68020.
I believe this problem was started way back in the original Apple MDS
Programmer’s Manual. In it, Apple printed example source code where the data
records were defined as DCs. (probably just a lazy-mans way of avoiding the use of A5
offsets in their code :-)
Assembly in general
From: Frank Henriquez
Maybe it’s just me, but...assembly language on the Mac is fun, fast and EASY.
68000 assembly language is easy to learn and powerful, and using Mac specific
routines is not much harder than in a high level language. I’ve noticed that I’m
spending more time coding than I would if I were using C or Pascal (so, what was a
structure again? go get the C book. Oh yeah, that right. Now, how do I make this
routine work? grab Inside Mac. OK, got it...hours later, I’ve forgotten what I was
trying to do in the first place). IM is documented well enough that calling routines
from assembly is no big deal. I guess all this talk about how difficult and tedious
assembly language is is just a rumor spread by assembly language programmers
trying to keep their job security...
From: Jim Reekes
I AGREE with Frank. 68000 assembly on the Mac is very easy, considering other
computer systems. The Mac has more calls to be used from the ROM than most other
development systems. The 68000 has a wealth of instructions and addressing methods.
Loading up the stack is very easy for passing parameters for trap calls. MPW Asm is
the only way to fly. But, if you’ve got a large scale program in development you might
get lost. (as I did) So I switched to Pascal for the bulk of the code, then re-wrote the
procedures that needed speeding up. All of this is easy enough under MPW. [The two
problems with assembly is losing your train of thought as the program gets bigger, and
the difficulty in debugging. With LSP for example, I can find a bug immediately. With
assembly, I had to guess and go through several compile-link iterations. So I can
generate much more code in the same time with Pascal. But there was a certain charm
about doing it all in assembly Oh well. -Ed]
BYTE benchmarks: Mac vs. IBM
From: Arnold Woodworth
What really amazed me was the large discrepencies between the benchmark
figures in the Mac ][ vs. IBM article and those in the Macintosh C compiler review (in
the same issue of BYTE!!). Either something is wrong or a Mac Plus with a commercial
C compiler is faster than a Mac ][. What did these guys use to run the benchmarks on
the Mac ][? MS Basic? Don’t laugh. If the Mac Plus benchmark times are divided by
4 (Mac ][ should be 4 times faster in theory), they make the figures of the Mac vs.
IBM article look like they were run with an interpreter. BYTE should get the Mac C
compiler reviewer and the IBM vs. Mac ][ authors together and make them do an
article on the differences between their benchmarks. THAT would give us meaningful
way to judge which machine is faster.
More MS bugs
From: Peter Griffith
Here’s yet another bug in the MS 1.0 basic compiler: my data acquisition board
sends the string +OVLOAD when the voltage exceeds the upper limit. Calling the
function VAL(“+OVLOAD”) should return the number 0, but instead causes the stack
to overflow onto the heap, resulting in a system error. Only thing to do is to check
strings to make sure it’s a number before using VAL.
Apple Marketing Assistance
From: Pete Harbeson
How on EARTH does anyone get a straight answer out of Apple?? I called developer
relations with a simple question (well _I_ thought it was simple) about any market
research they might have access to focusing on the insurance/finance industry. They
switched me to marketing re search. THEY switched me to marketing. THEY switched me
to some VERY strange office that seemed awfully paranoid that I was even talking to
them (“Uh...how did you get this number? You didn’t get it from Apple, didja?”).
THEN I got sent back to the switchboard with instructions to ask for “business
marketing”. They weren’t in (has anyone else noticed that Apple has entire
departments that seem to take the day off together?!). GOOD GRIEF! I’d send a letter to
somebody, but it’d probably just get sucked into some vast, endless, internal
mailstrom at Apple and never get delivered (don’t you think I’m doing well to keep my
sense of humor?) (he stomps away, gritting his teeth and muttering “IBM software
will be an easier sell in this industry anyway...grumble grumble...”) [The Apple IIgs
would suggest that Apple does not know what market research is and hence wouldn’t
know who should take your call. Does anyone know what identifiable market the IIgs is
targeted for, given the pricing in comparison to a Mac? Apple representatives at the
Paris Expo said 200,000 Apple IIgs systems have been sold so far. -Ed]
CRT filters
From: Dirk
The eye strain is starting to get to me working on a CRT 8 hours a day, 5 days a
week; not counting weekends. Does anyone have any advice or suggestions regarding the
selection and purchase of a CRT screen filer (i.e. what’s good, bad, etc.). Thanks in
advance. [My eye doctor told me either give up computing and become a forest ranger,
or plan on buying glasses in increasingly stronger lenses. At least my metal frames
look nice -Ed]
From: Jim Reekes
Dirk, I personally bought and recommend a UV filter for the Mac. I believe mine
was called “Perfect Vue”, or something close to that. The screen becomes a cool blue.
I like it much better.
Monitor tradeins
From: Macowaco
For those who might care; Apple developers will not be able to trade in their
Monochrome monitors for RGB as the rest of the retail market can. It still costs less to
simply purchase an RGB with the discount. [Apple Color monitors and 80 Meg hard
disks are now shipping! I got both within the last few weeks. The tape units are
supposed to ship “shortly” -Ed]
Deals...
From: Frank Henriquez
MCM Electronics, a TV and electronics hardware supply company, is selling
Macintosh flyback transformers for about $33.00... Then in EEN Times, there’s an ad
from Hamilton Electronics offering a 68020, 68881 and the PMMU for $400, all
rated at 16 MHZ. If you can find someone willing to buy the 68020 & 68881, the
PMMU would “only” cost about $130.
Lightspeed
The Cloud
I read with great interest Andrew Singer’s comments in the August MacTutor
regarding the “future” of Lightspeed on the II...seems System 4.1 really knocked them
for a loop (and everyone else).. *however* I am wondering about the code that
Lightspeed ver. 1.0 is presently generating...does it use any taboo addresses? In one of
my LSP programs I call TrackControl for a scrollbar; my actionProc continuously
redraws a drawing in the window to suit the value of the scrollbar. It works great
under system 3.2 *but* causes an instant crash under system 4.1 the
minute the scrollbar is clicked. Which gives me pause for thought, e specially since I
have now heard the rumor that code generated by LSP will not run on a Mac II. Well, I
knew that Lightspeed itself wouldn’t run (I don’t have the beta 1.01 version, but then I
don’t have a II either), but if programs developed with Lightspeed 1.0 are
incompatible with the II (or System 4.1!) through no fault of the programmer then
that is Real Bad News. Can anyone confirm this or shed some light on
Lightspeed- created code?
LSP 1.1
From: The Cloud
After reading the Color Life article in this month’s MacTutor, I noticed that it
was written with LSP 1.1 for the II (obviously).. apparently it (the 1.1 version) was
released at the Boston expo. Are the new libraries/interface files included in this
update? And will my programs compiled with 1.0 run on a MacII? or do I have to get
1.1 and recompile them?
Oh, I wish I had an Ap-ple Mac-in-tosh Twoooo... That’s the Mac I’d truly like to
own... Cause if I had an Apple Mac-in-tosh Twooo.. Then I’d prob’ly really hiss and
moan. (until things start getting “fixed”)
[LSP Ver. 1.1 is out as a patch program. I have it and it works great, since I
compiled the Color Life program with it. And there are new libraries for all the Mac II
stuff. It should be uploaded to Genie and CIS by now. -Ed]
A/UX
From: Maxbug
I just heard that Apple is _NOT_ going to ship A/UX on 40MB tape... They’re
going to ship it on 80 MB drives!
Hmmm...A/UX on an external 80 Meg Drive gives new meaning to the phrase UNIX
BOX.
LaserWriter driver weirdness
From: Jim Reekes
Question: What do you think will happen if I select to print pages 0 to 0 on the
LaserWriter?
Wrong toner-breath. Check it out. It doesn’t matter which application you use,
it’s the LaserWriter drivers. Next I tried printing pages 0 to 9 using Word 3.01 and
it continued to print the first page forever. I had to power off the printer.
Hypercharger Revisited
From: Dave Kosiur
Just another note about HyperDrive/HyperCharger software upgrades. General
Computer nows CHARGES for their system software upgrades! (I think it’s $30.00)
They claim that it’s due to including a new Laser Spooler (they now use Think’s, not
MacAmerica’s).
For those of you who are interested, the latest version of their software is V3R2,
which is meant to work with Finder 5.5/System 4.1 (it does work), and includes
special AppleTalk & Easy Access files for use with the HyperCharger.
FKEYS, FULLWRITE, WORKS1.1
From: Peter
Just found out that my FKeys will not work (either Apple’s or the ones I
installed) when I open a file in Microsoft Works (or Excel). Word is ok as are all
others I’ve tested so far. Is this generally known or what? Received my Visa bill today
& found the charge for FullWrite that I ordered weeks ago. So I guess it’s on the way
(they promised not to charge me until it shipped). Saw in Microsoft’s flyer that
version 1.1 of Works is available. But no details. Does anyone know anything about
this? [Microsoft is making a big deal about Works now being available on the IBM PC!
Is this a trend or what? And yes, it is 1.1 now. I just got it. There is no copy
protection; you personalize your software instead. This is great! We commend
Microsoft for this approach and encourage all software vendors to follow suit. VT100
emulation has been added. Label printing has been improved including the Imagewriter
jam problem! The Zoom box is now supported so you can’t grow a window on a large
screen and then not be able to shrink it on a smaller screen. -Ed]
xlisp 1.7
From: Maysong
Does anyone out there know why xlisp 1.7 doesn’t run on an SE?
From: Roy Hashimoto
I couldn’t get xlisp to work on my Macintosh II, either, so I took the source code,
fixed a few things to make it compatible with Lightspeed C, and rebuilt the whole thing.
It seems to work fine on the Macintosh II and on a Macintosh Plus, so I have great
confidence that it will work on an SE. The only drawback is that I haven’t yet figured
out how to do the interface to the Mac Toolbox, so the toolbox, toolbox-16, and
toolbox-32 functions are disabled.
Bashing Macworld
From: The Psuedohacker
Since I seem to be in a ragging mood lately, I thought I’d mention that the current
issue of MacWorld, the October Issue, has a very interesting editorial about computer
journalists and their ethics or lack of them as the case may be. Throughout the
editorial David Bunnell, Mr. PC World himself, mentioned certain examples and
policies that his magazine never would be guilty of. For example if a product is poor,
and users should stay away from it, Macworld will tell us, the readers. Also, their
reviews, which “carry alot of weight”, are always very thorough and objective,
uh-huh.
This comes from a magazine that’s been known to not review products unless the
publisher advertises in Macworld. They also just don’t give negative reviews.
I can’t honestly remember the last time I read a negative review in Macworld but
I do have fond memories of the multi-page spread on how to clean a mouse, that they
published a couple of years ago. [Funny you should mention the mouse article. It was
that article that inspired the creation of MacTutor! You might call it a case of “fluff
overload”. -Ed]