SPutPRAMRec
SPutPRAMRec Copy data from spsPointer's block into SPRAMRecord SpBlockPtr spBlkPtr ; address of 56-byte Slot Parameter Block
structure
SPutPRAMRec copies the logical data from the block referenced by spsPointer into the SPRAMRecord for the slot identified by spSlot. spBlkPtr is the address of a 56-byte Slot Parameter Block structure.
The relevant fields are as follows:
Out-In Name Type Size Offset Description
Æ spsPointer Ptr 4 4 Structure pointer Æ spSlot char 1 49 Slot number
noErr (0) No error
smEmptySlot (-300) No card in slot.
smCRCFail (-301) CRC check failed.
smFormatErr (-302) FHeader format is not Apple's
smRevisionErr (-303) The revision of the card's declaration ROM is wrong.
smNoDir (-304) Directory offset is NIL
smNosInfoArray (-306) The SDM could not allocate memory for the sInfo
array.
smResrvErr (-307) A reserved field of the declaration ROM was used.
smUnExBusErr (-308) An unexpected bus error occurred.
smBLFieldBad (-309) A valid ByteLanes field was not found.
smDisposePErr (-312) An error occurred during execution of DisposPointer.
smNoBoardSRsrc (-313) There is no board sResource.
smGetPRErr (-314) Error during execution of sGetPRAMRec.
smNoBoardId (-315) There is no board ID.
smInitStatVErr (-316) The InitStatus_V field was negative after Primary or
Secondary Init.
smInitTblVErr (-317) Error while trying to initialize the sResource Table.
smNoJmpTbl (-318) Slot Manager jump table could not be created smBadBoardId (-319) Board ID was wrong; reinit the PRAM record
Notes: SPutPRAMRec updates the Macintosh PRAM for that slot. The sPRAM
record is defined under SPRAMRecord. In that record, the field boardID is an Apple- defined field and is protected during execution of SPutPRAMRec.