SPrimaryInit
- InitSDeclMgr
- SCardChanged
- SExec
- SOffsetData
- SReadPBSize
- SCalcStep
- SInitSRsrcTable
- SInitPRAMRecs
- SSearchSRT
- SUpdateSRT
- SCalcSPointer
- SGetDriver
- SFindSInfoRecPtr
- SFindSRsrcPtr
SpBlockPtr spBlkPtr ; address of 56-byte Slot Parameter Block
structure
SPrimaryInit initializes each slot having an sPrimaryInit record. Used
only by the Operating System.
spBlkPtr is the address of a 56-byte Slot Parameter Block structure.
The relevant fields are as follows:
Out-In Name Type Size Offset Description
Æ spFlags char 1 54 Internal use only
noErr (0) No error
smEmptySlot (-300) No card in slot.
smCRCFail (-301) CRC check failed.
smFormatErr (-302) FHeader format is not Apple's
smRevisionErr (-303) The revision of the card's declaration ROM is wrong.
smNoDir (-304) Directory offset is NIL
smNosInfoArray (-306) The SDM could not allocate memory for the sInfo
array.
smResrvErr (-307) A reserved field of the declaration ROM was used.
smUnExBusErr (-308) An unexpected bus error occurred.
smBLFieldBad (-309) A valid ByteLanes field was not found.
smDisposePErr (-312) An error occurred during execution of DisposPointer.
smNoBoardSRsrc (-313) There is no board sResource.
smGetPRErr (-314) Error during execution of sGetPRAMRec.
smNoBoardId (-315) There is no board ID.
smInitStatVErr (-316) The InitStatus_V field was negative after Primary or
Secondary Init.
smInitTblVErr (-317) Error while trying to initialize the sResource Table.
smBadBoardId (-319) Board ID was wrong; reinit the PRAM record
Notes: SPrimaryInit passes the spFlags byte to the initialization code via seFlags.
Within that byte the fWarmStart bit should be set to 1 if a warm start is
being performed.