SInitSRsrcTable
- InitSDeclMgr
- SPrimaryInit
- SCardChanged
- SExec
- SOffsetData
- SReadPBSize
- SCalcStep
- SInitPRAMRecs
- SSearchSRT
- SUpdateSRT
- SCalcSPointer
- SGetDriver
- SFindSInfoRecPtr
- SFindSRsrcPtr
SpBlockPtr spBlkPtr ; address of 56-byte Slot Parameter Block
structure
SInitSRsrcTable initializes the Slot Resource Table. The contents of the
parameter block are un defined. Used only by the Operating System.
spBlkPtr is the address of a 56-byte Slot Parameter Block structure.
noErr (0) No error
smEmptySlot (-300) No card in slot.
smCRCFail (-301) CRC check failed.
smFormatErr (-302) FHeader format is not Apple's
smRevisionErr (-303) The revision of the card's declaration ROM is wrong.
smNoDir (-304) Directory offset is NIL
smNosInfoArray (-306) The SDM could not allocate memory for the sInfo
array.
smResrvErr (-307) A reserved field of the declaration ROM was used.
smUnExBusErr (-308) An unexpected bus error occurred.
smBLFieldBad (-309) A valid ByteLanes field was not found.
smDisposePErr (-312) An error occurred during execution of DisposPointer.
smNoBoardSRsrc (-313) There is no board sResource.
smGetPRErr (-314) Error during execution of sGetPRAMRec.
smNoBoardId (-315) There is no board ID.
smInitStatVErr (-316) The InitStatus_V field was negative after Primary or
Secondary Init.
smInitTblVErr (-317) Error while trying to initialize the sResource Table.
smBadBoardId (-319) Board ID was wrong; reinit the PRAM record
Notes: SInitSRsrcTable scans each slot and inserts the slot, type, sRsrcId,
sRsrcPtr, and spHWDev id values into the table for every sResource. It sets
all other fields to zero.